Router> reboot % ZyWALL is going to reboot! Got LINK_CHANGE Port [2] Copper is down --> Group [2] is down Welcome to USG FLEX 50W Username: Terminate All Processes: OK kill_process_and_umountfs() returns -7 reboot: Restarting system OCTEON eMMC stage 1 bootloader Success. Branching to stage 2 at: 0xFFFFFFFF81004000 U-Boot 2013.07 (Development build, svnversion: u-boot:465:468M, exec:)-svn465 (Build time: Sep 10 2015 - 10:04:22) Now loading stage3 u-boot... MMC read: dev # 1, block # 2048, count 8192 ... 8192 blocks read: OK Now booting stage3 u-boot of ZyXEL... ## Starting application at 0x80400000 ... U-Boot 2013.07 (Development build, svnversion: u-boot:465:468M, exec:)-svn465 (Build time: Sep 10 2015 - 10:13:15) BootModule Version: V1.12 | Sep 10 2015 10:13:15 DRAM: Size = 2048 Mbytes Press any key to enter debug mode within 3 seconds. ............................................................ Start to check file system... /dev/mmcblk0p6: 493/30720 files (0.8% non-contiguous), 108220/122880 blocks /dev/mmcblk0p7: Inodes that were part of a corrupted orphan linked list found. /dev/mmcblk0p7: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options) Done VALIDATE_CERTIFICATE_CHAIN:262 i=1, pkey=0x10686868 Kernel Version: V3.10.87 | 2024-08-22 01:58:24 ZLD Version: V5.39(ABAR.0) | 2024-08-22 02:42:08 INIT: version 2.86 booting Initializing Debug Account Authentication Seed (DAAS)... done. Setting the System Clock using the Hardware Clock as reference...System Clock set. Local time: Tue Oct 15 14:40:43 DUTC 2024 INIT: Entering runlevel: 3 Insmod ZYKLOG Module. Starting zylog daemon: zylogd zylog starts. Starting syslog-ng secu-reporter. Starting ZLD Wrapper Daemon.... Starting uam daemon. Starting myzyxel daemon. Starting periodic command scheduler: cron. Start ZyWALL system daemon.... Starting link_updown daemon. Check app signature package [zy_adp]load ZyADP Ver1.0.0 OK ................................................. .................................................. .................................................. .................................................. .Got WIRELESS_CARD_CHANGE Applying system configuration file, please wait... ................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. ...........................................% L2TP used crypto map should not be disabled. ....... .................................................. ......................ZyWALL system is configured successfully with startup-config.conf Got LINK_CHANGE Port [2] Copper is up --> Group [2] is up Got LINK_CHANGE Port [4] Copper is up --> Group [3] is up Got LINK_CHANGE Welcome to USG FLEX 50W Username: