[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.60 (jenkins@zybuild-195) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 b3aeaa06b+r49254) ) #1 SMP PREEMPT Mon Jan 12 13:38:04 CST 2026 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Ignoring memory range 0x40000000 - 0x41000000 [ 0.000000] Machine: Qualcomm Technologies, Inc. IPQ807x/AP-HK09 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: OVERLAP DETECTED! [ 0.000000] wifi_dump@51100000 (0x0000000051100000--0x0000000051700000) overlaps with wigig_dump@51300000 (0x0000000051300000--0x0000000051700000) [ 0.000000] On node 0 totalpages: 228608 [ 0.000000] DMA zone: 3572 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 228608 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03ef4a000 s20992 r8192 d32256 u61440 [ 0.000000] pcpu-alloc: s20992 r8192 d32256 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225036 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 loglevel=0 bootImage=0 mtdoops.mtddev=disklog mtdoops.record_size=126976 mtdoops.dump_oops=0 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1 coherent_pool=2M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] software IO TLB [mem 0x7fe01000-0x7fe41000] (0MB) mapped at [ffffffc03ee01000-ffffffc03ee40fff] [ 0.000000] Memory: 886128K/914432K available (5452K kernel code, 636K rwdata, 2380K rodata, 236K init, 432K bss, 28304K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc1000000 ( 15 MB actual) [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03f000000 ( 1008 MB) [ 0.000000] .init : 0xffffffc000828000 - 0xffffffc000863000 ( 236 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000828000 ( 7840 KB) [ 0.000000] .data : 0xffffffc000872000 - 0xffffffc000911200 ( 637 KB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000449] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000461] pid_max: default: 32768 minimum: 301 [ 0.000552] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000562] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.001245] EFI services will not be available. [ 0.001272] ASID allocator initialised with 65536 entries [ 0.052106] MSM Memory Dump base table set up [ 0.052129] MSM Memory Dump apps data table set up [ 0.090071] Detected VIPT I-cache on CPU1 [ 0.090116] CPU1: Booted secondary processor [410fd034] [ 0.120055] Detected VIPT I-cache on CPU2 [ 0.120084] CPU2: Booted secondary processor [410fd034] [ 0.150084] Detected VIPT I-cache on CPU3 [ 0.150111] CPU3: Booted secondary processor [410fd034] [ 0.150161] Brought up 4 CPUs [ 0.150187] SMP: Total of 4 processors activated. [ 0.150197] CPU: All CPU(s) started at EL1 [ 0.150220] alternatives: patching kernel code [ 0.150685] devtmpfs: initialized [ 0.168214] DMI not present or invalid. [ 0.168456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.168480] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.168784] pinctrl core: initialized pinctrl subsystem [ 0.169703] NET: Registered protocol family 16 [ 0.200025] cpuidle: using governor ladder [ 0.230044] cpuidle: using governor menu [ 0.230254] NET: Registered protocol family 42 [ 0.230405] vdso: 2 pages (1 code @ ffffffc000879000, 1 data @ ffffffc000878000) [ 0.230436] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.231096] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.231231] Read of property:soc_version_minor from node failed [ 0.231240] CPU: IPQ8072A, SoC Version: 2.0 [ 0.231665] IPC logging disabled [ 0.231672] IPC logging disabled [ 0.231676] IPC logging disabled [ 0.231681] IPC logging disabled [ 0.231685] IPC logging disabled [ 0.233575] gpiochip_add: registered GPIOs 0 to 69 on device: 1000000.pinctrl [ 0.233588] GPIO chip 1000000.pinctrl: created GPIO range 0->69 ==> 1000000.pinctrl PIN 0->69 [ 0.234417] Soc version is not 1, changing clock offsets [ 0.245897] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.248253] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.251642] sps:sps is ready. [ 0.256590] spmi spmi-0: PMIC Arb Version-2 (0x20010000) [ 0.263266] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.263574] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 [ 0.291136] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/soc/dummy-regulator@0[0]' [ 0.291336] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixed-regulator@0[0]' [ 0.292020] pps_core: LinuxPPS API ver. 1 registered [ 0.292028] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.292051] PTP clock support registered [ 0.292196] dmi: Firmware registration failed. [ 0.293441] Advanced Linux Sound Architecture Driver Initialized. [ 0.294141] clocksource: Switched to clocksource arch_sys_counter [ 0.297627] NET: Registered protocol family 2 [ 0.298247] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.298354] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 0.298539] TCP: Hash tables configured (established 8192 bind 8192) [ 0.298596] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.298633] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.298805] NET: Registered protocol family 1 [ 0.298854] PCI: CLS 0 bytes, default 128 [ 0.299333] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.308896] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.308913] jffs2: version 2.2 (NAND) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.312500] Key type asymmetric registered [ 0.312517] Asymmetric key parser 'x509' registered [ 0.312547] io scheduler noop registered [ 0.312561] io scheduler deadline registered (default) [ 0.314594] qcom-pcie 20000000.pci: GPIO lookup for consumer perst [ 0.314605] qcom-pcie 20000000.pci: using device tree for GPIO lookup [ 0.314618] of_get_named_gpiod_flags: can't parse 'perst-gpios' property of node '/soc/pci@20000000[0]' [ 0.314638] of_get_named_gpiod_flags: parsed 'perst-gpio' property of node '/soc/pci@20000000[0]' - status (0) [ 0.314784] 20000000.pci supply vdda not found, using dummy regulator [ 0.314831] 20000000.pci supply vdda_phy not found, using dummy regulator [ 0.314866] 20000000.pci supply vdda_refclk not found, using dummy regulator [ 0.315511] PCI host bridge /soc/pci@20000000 ranges: [ 0.315538] IO 0x20200000..0x2020ffff -> 0x20200000 [ 0.315553] MEM 0x20220000..0x2fffffff -> 0x20220000 [ 0.565681] qcom-pcie 20000000.pci: link up [ 0.565828] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00 [ 0.565843] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.565859] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x20200000-0x2020ffff]) [ 0.565870] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff] [ 0.565904] pci 0000:00:00.0: [17cb:1002] type 01 class 0x060400 [ 0.565939] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.565999] pci 0000:00:00.0: PME# supported from [ 0.566196] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.566396] pci 0000:01:00.0: [168c:0050] type 00 class 0x028000 [ 0.566619] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.566841] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.567150] pci 0000:01:00.0: supports D1 [ 0.567159] pci 0000:01:00.0: PME# supported from [ 0.567422] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.567460] pci 0000:00:00.0: BAR 8: assigned [mem 0x20300000-0x205fffff] [ 0.567476] pci 0000:00:00.0: BAR 9: assigned [mem 0x20600000-0x207fffff 64bit pref] [ 0.567490] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff 64bit] [ 0.567507] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.567522] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit] [ 0.567594] pci 0000:01:00.0: BAR 6: assigned [mem 0x20300000-0x2030ffff pref] [ 0.567605] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.567615] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 0.567627] pci 0000:00:00.0: bridge window [mem 0x20300000-0x205fffff] [ 0.567638] pci 0000:00:00.0: bridge window [mem 0x20600000-0x207fffff 64bit pref] [ 0.567698] PCIe: RC0 enabled during bootup [ 0.571991] msm_rpm_log_probe: OK [ 0.572306] msm-dcc b3000.dcc: DCC XPU is not specified [ 0.572637] msm-dcc b3000.dcc: jiffies_64: 0xffff8b08, cntvct_64: 0x16364112 [ 0.572649] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff80005fe004) [ 0.572660] msm-dcc b3000.dcc: gcnt_lo: 0x163642f9(0xffffff80005fe000) [ 0.573225] TZ SMMU State: SMMU Stage2 Enabled [ 0.573281] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set [ 0.574889] msm_serial 78b3000.serial: msm_serial: detected port #0 [ 0.574936] msm_serial 78b3000.serial: uartclk = 3686400 [ 0.574974] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 78, base_baud = 230400) is a MSM [ 0.574995] msm_serial: console setup on port #0 [ 0.575478] console [ttyMSM0] enabled [ 0.575820] msm_serial 78b1000.serial: msm_serial: detected port #1 [ 0.575858] msm_serial 78b1000.serial: uartclk = 19200000 [ 0.575888] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 79, base_baud = 1200000) is a MSM [ 0.576249] msm_serial: driver initialized [ 0.576537] msm_serial_hsl_init: driver initialized [ 0.585426] brd: module loaded [ 0.586059] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 0.587527] m25p80 spi32766.0: found w25q64dw, expected n25q128a11 [ 0.587541] m25p80 spi32766.0: w25q64dw (8192 Kbytes) [ 0.587633] 21 ofpart partitions found on MTD device spi32766.0 [ 0.587640] Creating 21 MTD partitions on "spi32766.0": [ 0.587650] 0x000000000000-0x000000050000 : "0:SBL1" [ 0.588421] 0x000000050000-0x000000060000 : "0:MIBIB" [ 0.589096] 0x000000060000-0x000000080000 : "0:BOOTCONFIG" [ 0.589782] 0x000000080000-0x0000000a0000 : "0:BOOTCONFIG1" [ 0.590458] 0x0000000a0000-0x000000220000 : "0:QSEE" [ 0.591179] 0x000000220000-0x0000003a0000 : "0:QSEE_1" [ 0.591872] 0x0000003a0000-0x0000003b0000 : "0:DEVCFG" [ 0.592552] 0x0000003b0000-0x0000003c0000 : "0:DEVCFG_1" [ 0.593242] 0x0000003c0000-0x0000003d0000 : "0:APDP" [ 0.593927] 0x0000003d0000-0x0000003e0000 : "0:APDP_1" [ 0.594652] 0x0000003e0000-0x000000420000 : "0:RPM" [ 0.595338] 0x000000420000-0x000000460000 : "0:RPM_1" [ 0.596016] 0x000000460000-0x000000470000 : "0:CDT" [ 0.596693] 0x000000470000-0x000000480000 : "0:CDT_1" [ 0.597375] 0x000000480000-0x000000490000 : "0:APPSBLENV" [ 0.598056] 0x000000490000-0x000000530000 : "0:APPSBL" [ 0.598722] 0x000000530000-0x0000005d0000 : "0:APPSBL_1" [ 0.599419] 0x0000005d0000-0x000000610000 : "0:ART" [ 0.600108] 0x000000610000-0x000000620000 : "mrd" [ 0.600791] 0x000000620000-0x000000630000 : "mrd_1" [ 0.601465] 0x000000630000-0x000000800000 : "conf" [ 0.603093] QPIC controller hw version Major:1, Minor:5 [ 0.603407] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa [ 0.603416] nand: ONFI 10-Compliant Winbond W29N02GZ [ 0.603424] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.603471] 5 ofpart partitions found on MTD device qcom_nand.0 [ 0.603477] Creating 5 MTD partitions on "qcom_nand.0": [ 0.603486] 0x000000000000-0x000003c00000 : "rootfs" [ 0.653792] mtd: device 21 (rootfs) set to be root filesystem [ 0.654080] mtdsplit: no squashfs found in "rootfs" [ 0.654101] 0x000003c00000-0x000004400000 : "0:WIFIFW" [ 0.661306] 0x000004400000-0x000008000000 : "rootfs_1" [ 0.712056] 0x000008000000-0x000008800000 : "0:WIFIFW_1" [ 0.719466] 0x000008800000-0x000010000000 : "logs" [ 0.820621] libphy: Fixed MDIO Bus: probed [ 0.821334] libphy: qca_mdio: probed [ 0.821741] Atheros 8031/8033 ethernet 90000.mdio:01: GPIO lookup for consumer reset [ 0.821752] Atheros 8031/8033 ethernet 90000.mdio:01: using device tree for GPIO lookup [ 0.821764] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@90000/ethernet-phy@0[0]' [ 0.821774] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@90000/ethernet-phy@0[0]' [ 0.821784] Atheros 8031/8033 ethernet 90000.mdio:01: using lookup tables for GPIO lookup [ 0.821794] Atheros 8031/8033 ethernet 90000.mdio:01: lookup for GPIO reset failed [ 0.822387] qca-mdio 90000.mdio: qca-mdio driver was registered [ 0.822574] cnss: INFO: IPC Logging is disabled! [ 0.822853] Skip QCA8074V1 in V2 platform [ 0.822917] cnss[2]: INFO: Disabling regdb support for QCA8074v2 [ 0.823140] cnss[2]: INFO: Platform driver probed successfully. plat ffffffc03ce50018 tgt 0xfffe [ 0.823380] i2c /dev entries driver [ 0.854786] sdhci: Secure Digital Host Controller Interface driver [ 0.854797] sdhci: Copyright(c) Pierre Ossman [ 0.854809] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.855073] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/soc/i2c@78ba000/lp5562@30[0]' [ 0.877862] lp5562 0-0030: internal clock used [ 0.880409] [ 0.880409] Version Rollback Feature Disabled [ 0.883097] remoteproc remoteproc0: releasing cd00000.qcom_q6v5_wcss [ 0.884389] SPMI VADC - Min ch: 0 Max ch: 15 [ 0.886250] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 [ 0.886344] coresight-csr 6001000.csr: CSR initialized [ 0.886498] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 [ 0.886668] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 [ 0.886825] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 [ 0.886976] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 [ 0.887129] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 [ 0.887281] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 [ 0.887431] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 [ 0.887583] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 [ 0.887734] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 [ 0.887893] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 [ 0.888044] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 [ 0.888193] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 [ 0.888344] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 [ 0.888498] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 [ 0.888651] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 [ 0.888805] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 [ 0.888958] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 [ 0.889119] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 [ 0.889284] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 [ 0.889451] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 [ 0.889627] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 [ 0.889949] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000 [ 0.889958] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000 [ 0.889972] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000 [ 0.889985] sps:BAM 0x0000000006044000 is registered.<6>[ 0.890459] coresight-tmc 6028000.tmc: TMC initialized [ 0.890901] coresight-tmc 6027000.tmc: TMC initialized [ 0.891240] coresight-funnel 6021000.funnel: FUNNEL initialized [ 0.891477] coresight-funnel 6100000.funnel: FUNNEL initialized [ 0.891712] coresight-funnel 6120000.funnel: FUNNEL initialized [ 0.891948] coresight-funnel 6130000.funnel: FUNNEL initialized [ 0.892199] coresight-funnel 61a1000.funnel: FUNNEL initialized [ 0.892934] coresight-etm4x 619c000.etm: ETM 4.0 initialized [ 0.893421] coresight-etm4x 619d000.etm: ETM 4.0 initialized [ 0.893904] coresight-etm4x 619e000.etm: ETM 4.0 initialized [ 0.894473] coresight-etm4x 619f000.etm: ETM 4.0 initialized [ 0.894739] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized [ 0.895143] coresight-stm 6002000.stm: STM initialized [ 0.896320] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 [ 0.896429] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized [ 0.898917] Netfilter messages via NETLINK v0.30. [ 0.898997] nf_conntrack version 0.5.0 (6922 buckets, 27688 max) [ 0.899442] nf_tables: (c) 2007-2009 Patrick McHardy [ 0.899473] nf_tables_compat: (c) 2012 Pablo Neira Ayuso [ 0.899683] gre: GRE over IPv4 demultiplexor driver [ 0.899696] ip_gre: GRE over IPv4 tunneling driver [ 0.900699] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.901547] NET: Registered protocol family 10 [ 0.902432] NET: Registered protocol family 17 [ 0.902479] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.902512] Bridge firewalling registered [ 0.902526] Ebtables v2.0 registered [ 0.902663] 8021q: 802.1Q VLAN Support v1.8 [ 0.904398] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.904623] pmd9655_s3: supplied by e-smps1-reg [ 0.904785] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 0.904794] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 [ 0.904803] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 0.904835] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 0.904911] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 0.904921] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV [ 0.904929] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 824000 uV [ 0.904936] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 888000 uV [ 0.904943] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 968000 uV [ 0.905009] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 753, quot_offset[ 7]= 0 [ 0.905018] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 981, quot_offset[ 7]= 225 [ 0.905027] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1089, quot_offset[ 7]= 105 [ 0.905036] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1232, quot_offset[ 7]= 140 [ 0.905169] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 0.905706] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 [ 0.905814] pmd9655_s4: supplied by e-smps1-reg [ 0.905943] cpr3_mem_acc_init: npu: not using memory accelerator regulator [ 0.905952] npu_corner: fused NOM: open-loop= 792000 uV [ 0.905959] npu_corner: fused TURBO: open-loop= 848000 uV [ 0.906004] npu_corner: fused NOM: open-loop= 792000 uV [ 0.906011] npu_corner: fused TURBO: open-loop= 848000 uV [ 0.906039] npu_corner: Normal and Cold condition init done. Default to normal. [ 0.906523] global timer is null [ 0.906953] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz [ 0.907113] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz [ 0.908706] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss [ 0.908741] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available [ 0.908960] ubi0: attaching mtd21 [ 1.099785] random: nonblocking pool is initialized [ 1.182803] ubi0: scanning is finished [ 1.188771] ubi0: attached mtd21 (name "rootfs", size 60 MiB) [ 1.188775] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.188778] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.188782] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.188784] ubi0: good PEBs: 480, bad PEBs: 0, corrupted PEBs: 0 [ 1.188787] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 [ 1.188790] ubi0: max/mean erase counter: 33/16, WL threshold: 4096, image sequence number: 1827868835 [ 1.188794] ubi0: available PEBs: 0, total reserved PEBs: 480, PEBs reserved for bad PEB handling: 40 [ 1.188802] ubi0: background thread "ubi_bgt0d" started, PID 116 [ 1.190067] hctosys: unable to open rtc device (rtc0) [ 1.195005] pmd9655_ldo11: disabling [ 1.195424] ALSA device list: [ 1.195427] No soundcards found. [ 1.197536] VFS: Mounted root (squashfs filesystem) readonly on device 31:27. [ 1.199030] devtmpfs: mounted [ 1.199110] Freeing unused kernel memory: 236K (ffffffc000828000 - ffffffc000863000) [ 1.199125] Freeing alternatives memory: 44K (ffffffc000863000 - ffffffc00086e000) [ 5.974790] Starting netlink on family name=ETH_GENLinit kernel log netlink done [ 6.028408] ubi1: attaching mtd25 [ 6.597408] ubi1: scanning is finished [ 6.604433] ubi1: attached mtd25 (name "logs", size 120 MiB) [ 6.604455] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 6.604458] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 6.604461] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 6.604464] ubi1: good PEBs: 960, bad PEBs: 0, corrupted PEBs: 0 [ 6.604468] ubi1: user volume: 4, internal volumes: 1, max. volumes count: 128 [ 6.604471] ubi1: max/mean erase counter: 8/5, WL threshold: 4096, image sequence number: 1043534328 [ 6.604474] ubi1: available PEBs: 0, total reserved PEBs: 960, PEBs reserved for bad PEB handling: 40 [ 6.604510] ubi1: background thread "ubi_bgt1d" started, PID 763 [ 6.605579] mtdoops: ready 3, 4 (no erase) [ 6.605589] mtdoops: Attached to MTD device 30 [ 6.780741] ssdk_switch_device_num_init[1167]:INFO:ess-switch dts node number: 1 [ 6.780783] ssdk_dt_get_switch_node[978]:INFO:ess-switch DT exist! [ 6.780791] ssdk_dt_parse_access_mode[864]:INFO:switch_access_mode: local bus [ 6.780794] ssdk_dt_parse_access_mode[877]:INFO:switchreg_base_addr: 0x3a000000 [ 6.780797] ssdk_dt_parse_access_mode[878]:INFO:switchreg_size: 0x1000000 [ 6.780800] ssdk_dt_parse_mac_mode[296]:INFO:mac mode = 0x8 [ 6.780803] ssdk_dt_parse_mac_mode[305]:INFO:mac mode1 = 0xd [ 6.780806] ssdk_dt_parse_mac_mode[314]:INFO:mac mode2 = 0xff [ 6.780810] ssdk_dt_parse_phy_info[578]:INFO:qcom,port_phyinfo DT doesn't exist! [ 6.780817] ssdk_dt_parse_mdio[717]:INFO:mdio DT exist! [ 6.780835] ssdk_dt_parse_uniphy[333]:INFO:ess-uniphy DT exist! [ 6.781043] ssdk_plat_init start [ 6.856160] ssdk_gcc_clock_init[1044]:INFO:SSDK gcc clock init successfully! [ 6.856361] ssdk_probe[2028]:INFO:ess_rst doesn't exist! [ 6.856929] HPPE initializing... [ 6.857023] ssdk_phy_driver_init[339]:INFO:dev_id = 0, phy_adress = 0, phy_id = 0xffffffff phytype doesn't match [ 6.857052] ssdk_phy_driver_init[339]:INFO:dev_id = 0, phy_adress = 2, phy_id = 0xffffffff phytype doesn't match [ 6.857081] ssdk_phy_driver_init[339]:INFO:dev_id = 0, phy_adress = 3, phy_id = 0xffffffff phytype doesn't match [ 6.857158] ssdk_phy_driver_init[339]:INFO:dev_id = 0, phy_adress = 5, phy_id = 0xffffffff phytype doesn't match [ 6.857165] aquantia_phy_api_ops_init[2202]:INFO:qca probe aquantia phy driver succeeded! [ 6.857558] qca803x_phy_api_ops_init[2174]:INFO:qca probe qca803x phy driver succeeded! [ 6.857613] regi_init[3583]:INFO:Initializing HPPE!! [ 7.028624] cfg80211: World regulatory domain updated: [ 7.028634] cfg80211: DFS Master region: unset [ 7.028637] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7.028642] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7.028646] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7.028650] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7.028653] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7.028657] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7.028661] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7.028664] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7.028667] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7.052390] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 7.074189] ssdk_ppe_reset_init[1276]:INFO:ppe reset successfully! [ 7.077573] qca_hppe_portctrl_hw_init[110]:INFO:Hawkeye PPE port initializing [ 7.110849] Initializing XFRM netlink socket [ 7.124890] NET: Registered protocol family 15 [ 7.145867] tun: Universal TUN/TAP device driver, 1.6 [ 7.145876] tun: (C) 1999-2004 Max Krasnyansky [ 9.764185] ssdk_switch_register[1722]:INFO:Chip version 0x1500 [ 9.764207] qca_link_polling_select[1318]:INFO:link-polling-required node does not exist [ 9.764210] ssdk_switch_register[1748]:INFO:polling is selected [ 9.764215] regi_init[3587]:INFO:Initializing HPPE Done!! [ 9.764280] regi_init[3647]:INFO:qca-ssdk module init succeeded! [ 9.765148] EDMA ver 1 hw init [ 9.765383] EDMA HW Reset completed succesfully [ 9.765421] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) [ 9.765424] RxDesc:1 (15-15) RxFill:1 (7-7) [ 9.766041] GMAC5(ffffffc03b586880) Invalid MAC@ - using 16:46:d5:81:76:c2 [ 9.766940] GMAC1(ffffffc03ad7b880) Invalid MAC@ - using de:83:35:0b:17:59 [ 9.844861] ********************************************************** [ 9.844869] * NSS Data Plane driver [ 9.844871] ********************************************************** [ 10.031729] l2tp_core: L2TP core driver, V2.0 [ 10.037021] l2tp_netlink: L2TP netlink interface [ 10.061406] nss_driver - fw of size 738908 bytes copied to load addr: 40000000, nss_id : 0 [ 10.063202] Supported Frequencies - [ 10.063209] 748.8 MHz 1.4976 GHz [ 10.063214] 1.6896 GHz <1>[ 10.063216] [ 10.063299] ffffffbffc60d080: set sdma ffffffc03c54fe00 [ 10.063372] ffffffbffc60d080: meminfo init succeed [ 10.101845] node size 2 # items 4 [ 10.101857] memory: 40000000 1073741824 (avl 922161152) items 4 active_cores 2 [ 10.101864] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 [ 10.101870] ffffffbffc60d080: nss core 0 booted successfully [ 10.111847] SCSI subsystem initialized [ 10.125757] nss_driver - fw of size 302036 bytes copied to load addr: 40800000, nss_id : 1 [ 10.126583] Supported Frequencies - [ 10.126586] 748.8 MHz 1.4976 GHz [ 10.126590] 1.6896 GHz <1>[ 10.126592] [ 10.126693] ffffffbffc614000: set sdma ffffffc0396daf00 [ 10.126742] ffffffbffc614000: meminfo init succeed [ 10.133883] node size 2 # items 4 [ 10.133894] memory: 40000000 1073741824 (avl 922615808) items 4 active_cores 2 [ 10.133902] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 [ 10.133922] ffffffbffc614000: nss core 1 booted successfully [ 10.138976] PPP generic driver version 2.4.2 [ 10.146507] libata version 3.00 loaded. [ 10.151748] NET: Registered protocol family 24 [ 10.152801] PPTP driver version 0.8.5 [ 10.154091] QCA multicast snooping installed successfully [ 10.171577] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 10.174857] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 10.257013] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.280268] ECM init [ 10.280299] ECM database jhash random seed: 0xdc59bc78 [ 10.281167] ECM init complete [ 10.326222] ip_set: protocol 6 [ 10.544709] :module loaded Build_ID - 01/12/26, 13:43:44 SoC=ipq807x_64 [ 10.567042] nss-macsec0 DT exist! [ 10.567146] nss-macsec1 DT exist! [ 10.567232] cannot find nss-macsec2 node [ 10.567234] nss_macsec init success [ 10.740390] u32 classifier [ 10.740399] input device check on [ 10.740401] Actions configured [ 10.763180] Mirror/redirect action on [ 10.936869] fuse init (API version 7.23) [ 10.948847] arp_tables: (C) 2002 David S. Miller [ 10.974021] daas: module license 'Proprietary' taints kernel. [ 10.974031] Disabling lock debugging due to kernel taint [ 11.016272] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 11.016280] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 11.048340] -->hy_fwd_init()<-- [ 11.167103] xt_time: kernel timezone is -0000 [ 11.467346] -->mesh_dvlan_init()<-- [ 11.484887] PPP MPPE Compression module registered [ 11.678220] Starting netlink on family name=ZYLED_GENL [ 11.678252] platform_support_init: insert module [ 11.678971] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/apd_dc_in[0]' - status (0) [ 11.678985] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/poe_det_tph[0]' - status (0) [ 11.678993] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/poe_det_bt[0]' - status (0) [ 11.678999] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/poe_det_tpl[0]' - status (0) [ 11.679007] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/ble_rst[0]' - status (0) [ 11.679015] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/rst_mb[0]' - status (0) [ 11.679024] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/btn_rst_mb[0]' - status (0) [ 11.679031] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/board_info_1[0]' - status (0) [ 11.679038] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/board_info_2[0]' - status (0) [ 11.679045] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/phy2_rst[0]' - status (0) [ 11.679052] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/phy1_rst[0]' - status (0) [ 11.679060] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/wd_en[0]' - status (0) [ 11.679068] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/wdi[0]' - status (0) [ 11.679074] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/wd_flag[0]' - status (0) [ 11.679082] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/led_locator[0]' - status (0) [ 11.679088] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/led_power[0]' - status (0) [ 11.679094] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/led_sys[0]' - status (0) [ 11.679100] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/led_mgmt[0]' - status (0) [ 11.679106] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/zy_platform_gpios/ble_backdoor[0]' - status (0) [ 11.748409] Selecting ethernet port setting with index 8 for wax650 [ 11.773906] ip_reputation_init [ 11.773914] [init ip reputation] minor:255, name:IR_DEV [ 12.390828] jffs2: notice: (2210) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 12.454607] UBIFS (ubi1:2): background thread "ubifs_bgt1_2" started, PID 2238 [ 12.485624] UBIFS (ubi1:2): recovery needed [ 12.558141] UBIFS (ubi1:2): recovery completed [ 12.558206] UBIFS (ubi1:2): UBIFS: mounted UBI device 1, volume 2, name "diaglog" [ 12.558211] UBIFS (ubi1:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 12.558215] UBIFS (ubi1:2): FS size: 29204480 bytes (27 MiB, 230 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 12.558218] UBIFS (ubi1:2): reserved for root: 1379399 bytes (1347 KiB) [ 12.558223] UBIFS (ubi1:2): media format: w4/r0 (latest is w4/r0), UUID 26F3624C-7997-4EEB-BA59-EDAC6B9C8958, small LPT model [ 12.563067] UBIFS (ubi1:3): background thread "ubifs_bgt1_3" started, PID 2240 [ 12.595189] UBIFS (ubi1:3): recovery needed [ 12.635867] UBIFS (ubi1:3): recovery completed [ 12.635913] UBIFS (ubi1:3): UBIFS: mounted UBI device 1, volume 3, name "reserved" [ 12.635917] UBIFS (ubi1:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 12.635921] UBIFS (ubi1:3): FS size: 66154496 bytes (63 MiB, 521 LEBs), journal size 3301376 bytes (3 MiB, 26 LEBs) [ 12.635924] UBIFS (ubi1:3): reserved for root: 3124639 bytes (3051 KiB) [ 12.635930] UBIFS (ubi1:3): media format: w4/r0 (latest is w4/r0), UUID 9A820E31-F936-42F9-847C-7BA400E02D9E, small LPT model [ 13.265317] UBIFS (ubi1:1): background thread "ubifs_bgt1_1" started, PID 2410 [ 13.297059] UBIFS (ubi1:1): recovery needed [ 13.371249] UBIFS (ubi1:1): recovery completed [ 13.371294] UBIFS (ubi1:1): UBIFS: mounted UBI device 1, volume 1, name "coredump" [ 13.371299] UBIFS (ubi1:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 13.371303] UBIFS (ubi1:1): FS size: 5586944 bytes (5 MiB, 44 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) [ 13.371306] UBIFS (ubi1:1): reserved for root: 263884 bytes (257 KiB) [ 13.371312] UBIFS (ubi1:1): media format: w4/r0 (latest is w4/r0), UUID 60FC90E6-38B7-4FAB-A221-79B17FC43D48, small LPT model [ 13.655633] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.774279] nss-dp 3a003000.dp1 eth0: PHY Link up speed: 1000 [ 17.774326] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.512642] ip_local_port_range: prefer different parity for start/end values. [ 27.052200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.196610] ECM exit [ 33.434596] ECM exit complete [ 35.089636] ubi2: attaching mtd22 [ 35.128179] ubi2: scanning is finished [ 35.134562] ubi2: attached mtd22 (name "0:WIFIFW", size 8 MiB) [ 35.134574] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 35.134578] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 35.134583] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 35.134587] ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 [ 35.134592] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 35.134597] ubi2: max/mean erase counter: 15/15, WL threshold: 4096, image sequence number: 2085201396 [ 35.134602] ubi2: available PEBs: 1, total reserved PEBs: 63, PEBs reserved for bad PEB handling: 40 [ 35.134721] ubi2: background thread "ubi_bgt2d" started, PID 3313 [ 36.430685] wlan: [3399:I:RPTR] qca_multi_link_init_module: [ 36.430685] ******QCA Repeater Initialization Done*********** [ 36.430685] [ 36.434200] wlan: [3399:I:ANY] qdf_ini_parse: INI values read: 72 [ 36.434210] wlan: [3399:I:ANY] qdf_ini_parse: INI file parse successful [ 36.437450] wlan: [3399:I:ANY] qdf_ini_parse: INI values read: 56 [ 36.437460] wlan: [3399:I:ANY] qdf_ini_parse: INI file parse successful [ 37.675078] cnss[2]: INFO: Setting daemon_support=1 for instance_id 0x2 [ 37.756273] cnss[2]: INFO: Setting cold_boot_support=1 for instance_id 0x2 [ 38.333802] wlan: [3814:I:ANY] =======ol_if_register_wifi3_0========== [ 38.333802] [ 38.333823] wlan: [3814:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd6a3dd8 [ 38.333853] wlan: [3814:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1 [ 38.333873] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss [ 38.353894] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 39.502357] Subsystem error monitoring/handling services are up [ 39.502667] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up [ 39.502715] wlan: [3814:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1 [ 39.502729] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffe, FW ready timeout: 15 seconds [ 39.503097] rpmsg_dev_probe: No pm domain [ 39.503276] rpmsg_dev_probe: No pm domain [ 39.504989] cnss[2]: INFO: QMI WLFW service connected, state: 0x1 [ 39.505177] cnss[2]: INFO: device_id : 65534 mem mode : [0] [ 39.505187] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ807x/AP-HK09 [ 39.506016] cnss[2]: ERR: WARNING: More memory is reserved. Reserved size 0x5f00000, Requested size 0x5dec000. [ 39.506577] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x0, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x260884a5, fw_build_timestamp: 2023-05-17 07:53, otp_version: 0x0 eeprom_caldata_read_timeout 0s [ 39.506589] cnss[2]: INFO: No board_id entry in device tree [ 39.506593] cnss[2]: INFO: ZYXEL Replace BDF filename IPQ8074/bdwlan.bin with IPQ8074/bdwlan.bin [ 39.512081] cnss[2]: INFO: BDF location : 0x4b0c0000 [ 39.512093] cnss[2]: INFO: BDF IPQ8074/bdwlan.bin size 131072 [ 39.512721] cnss[2]: INFO: per device BDF location : 0x4b0e0000 [ 39.512780] cnss[2]: INFO: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 [ 39.604157] cnss[2]: INFO: FW ready received for device 0xfffe [ 39.605208] wlan: [3814:I:ANY] pld_ahb_wlan_enable: cnss_mode: Cold boot calibration [ 39.605217] cnss[2]: INFO: Sending mode message, mode: COLDBOOT CALIBRATION(7), state: 0xf [ 39.695509] wlan: [3814:I:ANY] init_ath_pci_3_0: 6ath_ol_pci_wifi3.0 : (Atheros/multi-bss) [ 39.698706] wlan: [3820:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 0 bus_type 1 [ 39.698727] cnss[2]: INFO: Coldboot Calbration wait started for Device: 0xfffe, timeout: 60 seconds [ 39.972858] cnss[2]: INFO: Coldboot Calibration completed successfully for device 0xfffe [ 40.024148] cnss[2]: INFO: Coldboot Calibration wait ended for device 0xfffe [ 40.024165] cnss[2]: INFO: Sending mode message, mode: OFF(4), state: 0x7 [ 40.024970] cnss[2]: INFO: QMI WLFW service disconnected, state: 0x6 [ 40.052233] remoteproc remoteproc0: stopped remote processor cd00000.qcom_q6v5_wcss [ 40.052274] wlan: [3820:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 1 bus_type 1 [ 40.208811] wlan: [3832:I:ANY] =======ol_if_register_wifi3_0========== [ 40.208811] [ 40.208829] wlan: [3832:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd93cdd8 [ 40.208855] wlan: [3832:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1 [ 40.208872] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss [ 40.209088] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 40.566370] Subsystem error monitoring/handling services are up [ 40.566807] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up [ 40.566857] wlan: [3832:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1 [ 40.566872] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffe, FW ready timeout: 15 seconds [ 40.567088] rpmsg_dev_probe: No pm domain [ 40.567233] rpmsg_dev_probe: No pm domain [ 40.570567] cnss[2]: INFO: QMI WLFW service connected, state: 0x1 [ 40.570728] cnss[2]: INFO: device_id : 65534 mem mode : [0] [ 40.570737] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ807x/AP-HK09 [ 40.577894] cnss[2]: ERR: WARNING: More memory is reserved. Reserved size 0x5f00000, Requested size 0x5dec000. [ 40.578476] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x0, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x260884a5, fw_build_timestamp: 2023-05-17 07:53, otp_version: 0x0 eeprom_caldata_read_timeout 0s [ 40.578490] cnss[2]: INFO: No board_id entry in device tree [ 40.578497] cnss[2]: INFO: ZYXEL Replace BDF filename IPQ8074/bdwlan.bin with IPQ8074/bdwlan.bin [ 40.578818] cnss[2]: INFO: BDF location : 0x4b0c0000 [ 40.578822] cnss[2]: INFO: BDF IPQ8074/bdwlan.bin size 131072 [ 40.579454] cnss[2]: INFO: per device BDF location : 0x4b0e0000 [ 40.579525] cnss[2]: INFO: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 [ 40.674145] cnss[2]: INFO: FW ready received for device 0xfffe [ 40.674695] wlan: [3832:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode [ 40.674911] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7 [ 40.683974] wlan: [3832:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4 [ 40.684599] wlan: [3832:I:ANY] __ol_ath_attach: Allocated soc ffffffc033980880 [ 40.684666] wlan: [3832:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully [ 40.684745] wlan: [3832:I:ANY] qdf_ini_parse: INI values read: 0 [ 40.684752] wlan: [3832:I:ANY] qdf_ini_parse: INI file parse fail: invalid file format [ 40.684759] wlan: [3832:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA8074.ini; status:4 [ 40.691573] wlan: [3832:I:ANY] qdf_ini_parse: INI values read: 84 [ 40.691578] wlan: [3832:I:ANY] qdf_ini_parse: INI file parse successful [ 40.691671] wlan: [3832:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 0 Target Type 18 [ 40.691686] wlan: [3832:I:ANY] __ol_ath_attach: dev name soc0 [ 40.691859] wlan: [3832:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle ffffffc037471000 [ 40.700975] wlan: [3832:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0 [ 40.700988] wlan: [3832:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0 [ 40.700994] wlan: [3832:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1 [ 40.701002] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 40.701008] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 40.701014] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 40.701027] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 40.701033] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 40.701039] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 40.701046] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 40.701051] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 40.701057] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 40.701063] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 40.701069] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 40.701075] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 40.701081] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 40.701087] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 40.701093] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 40.701099] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 0 [ 40.701105] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x0 [ 40.701111] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x0 [ 40.701118] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 1 [ 40.701125] wlan: [3832:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 0x64 [ 40.701131] wlan: [3832:I:MBSSIE] ol_ath_ema_init_ctx: max_pp:1 max_ngroups:1 [ 40.701137] wlan: [3832:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz :870 [ 40.701142] wlan: [3832:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :200 [ 40.701148] wlan: [3832:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp :1 [ 40.701154] wlan: [3832:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn: 4 [ 40.701160] wlan: [3832:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 4 [ 40.701165] wlan: [3832:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp: 4 [ 40.701171] wlan: [3832:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup: 4 [ 40.701177] wlan: [3832:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz: 4 [ 40.701182] wlan: [3832:I:MBSSIE] ol_ath_soc_attach: rnr_6ghz_adv_override:0 [ 40.701190] wlan: [3832:I:ANY] htc_wmi_init: HTC Pipe Ready Timeout 6000ms [ 40.701218] wlan: [3832:I:ANY] htc_wmi_init: HT Create . ffffffc02f9aa000 [ 40.701224] wlan: [3832:I:ANY] htc_wmi_init: Skipping BMI Done [ 40.701230] wlan: [3832:I:ANY] htc_wmi_init: host_enable 0 [ 40.720503] wlan: [3832:I:ANY] ol_target_init_complete: CDP soc attach success [ 40.720518] wlan: [3832:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 [ 40.720653] wlan: [3832:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc02f9aa000, ep 2, value 1 [ 40.720705] wlan: [3832:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc02f9aa000, ep 3, value 1 [ 40.721154] wlan: [738:I:TIF] HE_CAP Info = 9a18010d [ 40.721165] wlan: [738:I:TIF] Num HW modes = 1 [ 40.721170] wlan: [738:I:TIF] Num PHY = 2 [ 40.721175] wlan: [738:I:TIF] FW Build Version (Ext.) = 0 [ 40.721181] wlan: [738:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0 [ 40.721189] wlan: [738:I:TIF] Preferred HW Mode = 1 Num Radios = 2 [ 40.721223] wlan: [738:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 1 phy_id = 0 wireless modes = f97f9001 [ 40.721229] wlan: [738:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes [ 40.721236] wlan: [738:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 1 phy_id = 1 wireless modes = 680688c [ 40.721246] wlan_create_pdev_netdevice: soc_idx 0 radio_id 0 [ 40.721249] soc_idx 0 radio_id 0 map to zyxel radio_id 1 [ 40.721752] wlan: [738:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success [ 40.721756] wlan_create_pdev_netdevice: soc_idx 0 radio_id 1 [ 40.721759] soc_idx 0 radio_id 1 map to zyxel radio_id 0 [ 40.722138] wlan: [738:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success [ 40.722146] wlan: [738:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 40.722153] wlan: [738:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 40.722160] wlan: [738:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 34 [ 40.722170] wlan: [738:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 40.722176] wlan: [738:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 40.722185] wlan: [738:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 34 [ 40.722192] wlan: [738:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 40.722198] wlan: [738:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 40.722204] wlan: [738:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 34 [ 40.722210] wlan: [738:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 [ 40.722215] wlan: [738:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 40.722222] wlan: [738:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17 [ 40.722230] wlan: [738:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:ffffffc037471000 [ 40.727434] wlan: [738:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 529 vdevs = 17 [ 40.727448] wlan: [738:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success [ 40.727600] wlan: [738:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:1 wmi_handle:ffffffc02f7f0c00 [ 40.732725] wlan: [738:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 1 Number of peers = 529 vdevs = 17 [ 40.732739] wlan: [738:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success [ 40.833230] wlan: [738:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 [ 40.987204] zy_reg_modify_chan_list :Country code does not match, current country is 840, zy channel is for 0 [ 40.987346] zy_reg_modify_chan_list :Country code does not match, current country is 840, zy channel is for 0 [ 40.987405] wlan: [738:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 [ 40.987414] wlan: [738:E:TIF] init_deinit_ready_event_handler: Host Requested 1058 peers. FW Supports 450 peers [ 40.987427] wlan: [738:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 501, max_ast_index: 2064 [ 40.987427] [ 40.987549] wlan: [3832:I:ANY] ol_ath_connect_htc: WMI is ready [ 40.987678] wlan: [3832:I:ANY] ol_ath_soc_attach: connect HTC [ 40.987684] wlan: [3832:I:ANY] ol_ath_soc_attach: bypasswmi : 0 [ 40.987710] wlan: [3832:I:MSCS] qca_mscs_module_init: [ 40.987710] ****QCA MSCS Initialization Done**** SoC ffffffc033980880 [ 40.987716] wlan: [3832:I:ANY] ol_ath_soc_attach: UMAC attach [ 40.987791] wlan: [3832:I:ANY] __ol_ath_attach: pdev_netdev name wifi1 [ 40.987810] wlan: [3832:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target [ 40.988421] wlan: [3832:I:ANY] __ol_ath_attach: BURSTING enabled by default [ 40.988475] wlan: [3832:I:ANY] ol_ath_pdev_attach: interface_id 1 [ 40.988489] wlan: [3832:I:ANY] ol_ath_pdev_attach: host_num_peers_pdev=208, max_target_connected_peers=416 [ 40.988489] [ 40.988497] wlan: [3832:I:TIF] ol_ath_pdev_regdmn_init: phy id = 0 Modes supported [ 40.988504] wlan: [3832:I:TIF] ol_ath_pdev_regdmn_init: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 [ 40.988511] wlan: [3832:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 0 supp_bnd = 2, modes = 793f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4900, hi_5g = 5920 [ 40.988517] wlan: [3832:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 793f9001 before update [ 40.988524] wlan: [3832:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 793f9001 after update [ 40.988532] wlan: [3832:I:ANY] ol_ath_update_ext_he_caps: 11ax 5G supported case [ 40.988682] wlan: [3832:I:MBSSIE] ieee80211_mbss_attach: :> [ 40.988691] wlan: [3832:I:MBSSIE] ieee80211_mbss_attach: : [ 40.993603] wlan: [3832:I:MBSSIE] ieee80211_mbss_attach: : 0002) [ 41.465516] wlan: [3852:I:ANY] hif_set_hia_extnd: [ 41.465516] CLOCK PLL skipped [ 41.467597] wlan: [3852:E:HIF] hif_pci_configure_legacy_irq: X, ret = 0 [ 41.467612] wlan: [3852:I:ANY] qca_napi_create: qca_napi_create: napi instance 32 created on pipe 4 [ 41.467796] wlan: [3852:I:ANY] __ol_ath_attach: Allocated soc ffffffc02ba00880 [ 41.467859] wlan: [3852:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully [ 41.468093] wlan: [3852:I:ANY] qdf_ini_parse: INI values read: 1 [ 41.468099] wlan: [3852:I:ANY] qdf_ini_parse: INI file parse successful [ 41.470554] wlan: [3852:I:ANY] qdf_ini_parse: INI values read: 26 [ 41.470559] wlan: [3852:I:ANY] qdf_ini_parse: INI file parse successful [ 41.470580] wlan: [3852:E:QDF] CONFIG creation failed [ 41.470678] wlan: [3852:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 0 Target Type 7 [ 41.470696] wlan: [3852:I:ANY] __ol_ath_attach: dev name soc1 [ 41.470740] wlan: [3852:I:ANY] ol_target_init: BMI inited. [ 41.470822] wlan: [3852:I:ANY] ol_target_init: BMI Get Target Info. [ 41.470828] wlan: [3852:I:ANY] ol_target_init: Chip id: 0x7, chip version: 0x4100016d [ 41.470835] wlan: [3852:I:ANY] ol_ath_host_config_update: 6 [ 41.470835] CE WAR Disabled [ 41.470835] [ 41.470936] wlan: [3852:I:ANY] ol_ath_configure_target: NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 [ 41.471060] wlan: [3852:I:ANY] ol_target_init: configure Target . [ 41.471137] wlan: [3852:I:ANY] ol_transfer_bin_file: flash data file defined [ 41.471143] wlan: [3852:I:ANY] ol_transfer_bin_file: Get Caldata for soc1. [ 41.471161] wlan: [3852:E:QDF] qdf_fs_read[80]: caldata data size mismatch, fsize=12064, cal_size=2116 [ 41.471176] wlan: [3852:I:ANY] qc98xx_verify_checksum: flash checksum passed: 0x4805 [ 41.471182] wlan: [3852:I:ANY] ol_transfer_bin_file: Download Flash data len 2116 [ 41.471265] wlan: [3852:I:ANY] ol_transfer_bin_file: Board extended Data download address: 0x0 [ 41.475417] wlan: [3852:I:ANY] ol_download_cal_data: Board data file: 4 successfully downloaded, download address: 0000000000401cc0 [ 41.475748] wlan: [3852:I:ANY] ol_transfer_bin_file: Mission mode: Firmware CHIP Version 0 [ 41.476198] wlan: [3852:W:ANY] check_path_exists: Path /lib/firmware/AR9887/athwlan.codeswap.bin doesnt exist [ 41.476212] wlan: [3852:W:ANY] check_path_exists: Path /lib/firmware/AR9887/athwlan.dataswap.bin doesnt exist [ 41.476219] wlan: [3852:I:ANY] ol_transfer_bin_file: Downloading firmware file: AR9887/athwlan.bin [ 41.528976] wlan: [3852:I:ANY] ol_transfer_bin_file: downloading file 1, Download data len 237856 [ 42.544226] wlan: [3852:I:ANY] ol_target_init: Download FW done. [ 42.544405] wlan: [3852:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle ffffffc02f7f2800 [ 42.544445] wlan: [3852:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0 [ 42.544451] wlan: [3852:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0 [ 42.544460] wlan: [3852:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1 [ 42.544469] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 42.544475] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 42.544481] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 42.544487] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 42.544493] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 42.544499] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 42.544505] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 42.544511] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 42.544517] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 42.544523] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 42.544529] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 42.544535] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 42.544541] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 [ 42.544547] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 42.544554] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 [ 42.544559] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 0 [ 42.544566] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x0 [ 42.544571] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x0 [ 42.544577] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 1 [ 42.544583] wlan: [3852:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 0x64 [ 42.544589] wlan: [3852:I:MBSSIE] ol_ath_ema_init_ctx: max_pp:1 max_ngroups:1 [ 42.544595] wlan: [3852:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz :870 [ 42.544601] wlan: [3852:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :200 [ 42.544607] wlan: [3852:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp :1 [ 42.544613] wlan: [3852:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn: 4 [ 42.544618] wlan: [3852:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 4 [ 42.544624] wlan: [3852:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp: 4 [ 42.544630] wlan: [3852:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup: 4 [ 42.544636] wlan: [3852:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz: 4 [ 42.544641] wlan: [3852:I:MBSSIE] ol_ath_soc_attach: rnr_6ghz_adv_override:0 [ 42.544648] wlan: [3852:I:ANY] htc_wmi_init: HTC Pipe Ready Timeout 6000ms [ 42.544674] wlan: [3852:I:ANY] htc_wmi_init: HT Create . ffffffc02c8d5000 [ 42.544717] wlan: [3852:I:ANY] htc_wmi_init: host_enable 1 [ 42.551404] wlan: [3852:I:ANY] ol_soc_pdev_attach: soc=ffffffc02ba00880 0000000000000000 -1 [ 42.551514] wlan: [3852:I:ANY] ol_target_init_complete: CDP soc attach success [ 42.551521] wlan: [3852:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 [ 42.551582] wlan: [3852:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc02c8d5000, ep 2, value 1 [ 42.551919] wlan: [1113:I:TIF] init_deinit_sw_version_check: Firmware_Build_Number:0 [ 42.551926] wlan: [1113:E:TIF] init_deinit_sw_version_check: host/RAM_fw Build Ver Mismatch: H:0x23, F:0x0 ! [ 42.551934] wlan: [1113:E:TIF] init_deinit_sw_version_check: host/RAM_fw uses same Ver: Major:0x1, Minor:0x0,Release:0x0, Build:0x23 [ 42.551943] wlan: [1113:E:TIF] init_deinit_populate_fw_version_cmd: failed to save fw version [ 42.551965] wlan: [1113:I:TIF] init_deinit_update_large_ap_config: LARGE_AP enabled. num_peers 145, num_vdevs 17, num_tids 256 [ 42.552241] wlan: [1113:I:TIF] init_deinit_mem_mgr_alloc_chunk: req_id 1 idx 0 num_units 146 unit_len 404 [ 42.552253] wlan: [1113:E:TIF] init_deinit_alloc_pdevs: mac_phy cap is null [ 42.552258] wlan_create_pdev_netdevice: soc_idx 1 radio_id 0 [ 42.552261] soc_idx 1 radio_id 0 map to zyxel radio_id 2 [ 42.552492] wlan: [1113:D:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_main_attach: event log enabled by default [ 42.552870] wlan: [1113:E:TIF] init_deinit_update_pdev_tgt_info: mac_phy cap is null [ 42.552877] wlan: [1113:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 [ 42.552884] wlan: [1113:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 42.552897] wlan: [1113:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 15 [ 42.552903] wlan: [1113:E:TIF] init_deinit_set_per_pdev_mbssid_config: mac_phy_cap is null [ 42.552914] wlan: [1113:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:ffffffc02f7f2800 [ 42.552972] wlan: [1113:I:ANY] ol_tx_pflow_ctrl_init: Startup Mode-0 set [ 42.552978] wlan: [1113:I:ANY] ol_txrx_pdev_attach: pdev attach scn = ffffffc02b730880, scn ctx = 0000000000000000 scn ifnum = 0 [ 42.552985] wlan: [1113:I:ANY] ol_txrx_pdev_attach: pdev attach soc = ffffffc02ba00880, soc ctx = 0000000000000000, soc id = -1 soc ifnum = 0 [ 42.553288] wlan: [1113:I:ANY] htt_alloc_peer_map_mem: [ 42.553288] htt_alloc_peer_map_mem : Alloc Success : host q vaddr ffffffc03b546000 paddr 7c546000 [ 42.553296] wlan: [1113:I:ANY] htt_alloc_peer_map_mem: [ 42.553296] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts [ 42.554572] wlan: [1113:I:ANY] 6 [ 42.554572] <=== cfg max peer id 2080 ====> [ 42.554572] [ 42.554762] wlan: [1113:I:ANY] ol_txrx_pdev_attach: 61424 tx desc's allocated ; range starts from ffffffc02ace0000 [ 42.555014] wlan: [1113:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 145 vdevs = 15 [ 42.555021] wlan: [1113:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success [ 42.661864] wlan: [0:I:ANY] ol_ath_debug_print_event_handler: FIRMWARE:P 146 V 15 T 442 [ 42.661864] [ 42.667132] wlan: [1113:E:TIF] init_deinit_ready_event_handler: agile capability disabled in HW [ 42.667162] wlan: [3852:I:ANY] __ol_ath_check_wmi_ready: ABI Version mismatch: Host(0x3), Target(0x0) [ 42.667170] wlan: [3852:I:ANY] ol_ath_connect_htc: WMI is ready [ 42.667211] wlan: [3852:E:CMN_MLME] target_if_vdev_mgr_wmi_event_register: failed to register for delete response [ 42.667224] wlan: [3852:E:DIRECT_BUF_RX] direct_buf_rx_target_attach: hal soc or osdev is null [ 42.667230] wlan: [3852:E:ANY] ol_ath_soc_attach: Direct Buffer Rx Target Attach Failed [ 42.667235] wlan: [3852:I:ANY] ol_ath_soc_attach: connect HTC [ 42.667241] wlan: [3852:I:ANY] ol_ath_soc_attach: bypasswmi : 0 [ 42.667260] wlan: [3852:I:ANY] ol_ath_soc_attach: UMAC attach [ 42.667278] wlan: [3852:I:ANY] __ol_ath_attach: pdev_netdev name wifi2 [ 42.667299] wlan: [3852:I:ANY] __ol_ath_attach: nss-wifi: update radio nss context with soc context for legay radio [ 42.667329] wlan: [3852:I:ANY] htt_h2t_frag_desc_bank_cfg_msg: HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for SoC ID = 1 [ 42.667355] wlan: [0:I:ANY] htt_t2h_msg_handler_misc: 6target uses HTT version 2.2; host uses 2.2 [ 42.672630] wlan: [3852:I:ANY] __ol_ath_attach: BURSTING enabled by default [ 42.672678] wlan: [3852:I:ANY] ol_ath_pdev_attach: interface_id 2 [ 42.672691] wlan: [3852:I:ANY] ol_ath_pdev_attach: host_num_peers_pdev=130, max_target_connected_peers=130 [ 42.672691] [ 42.672698] wlan: [3852:E:ANY] ol_ath_pdev_regdmn_init: mac_phy_cap is NULL [ 42.672732] wlan: [3852:E:ANY] ol_ath_update_caps: Hw capability for nac is not supported [ 42.672747] wlan: [3852:E:ANY] ol_ath_update_fw_adfs_support: mac phy cap arr is NULL [ 42.672757] wlan: [3852:I:ANY] ol_regdmn_start: ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFFFFFFFFFF, netBand=FFFFFFFFFFFFFFFF, extendedChanMode=0. [ 42.672813] zy_reg_modify_chan_list :Country code does not match, current country is 840, zy channel is for 0 [ 42.673023] wlan: [3852:I:MBSSIE] ieee80211_mbss_attach: :> [ 42.673029] wlan: [3852:I:MBSSIE] ieee80211_mbss_attach: :>>> CB Set 0000000000000000 [ 42.674265] wlan: [3852:I:ANY] wlan_scan_update_channel_list: num_chan: 36 [ 42.674303] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[3], ptr:ffffffbffd3487f0 [ 42.674316] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(ffffffc02b029010) is_primary 0 [ 42.674334] wlan: [3852:E:CFR] tgt_cfr_init_pdev: Error occurred with exit code 11 [ 42.674334] [ 42.674342] wlan: [3852:E:CFR] wlan_cfr_pdev_open: tgt_cfr_init_pdev failed with 11 [ 42.674342] [ 42.674357] wlan: [3852:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5 [ 42.674357] [ 42.674367] wlan: [3852:E:ANY] ol_ath_set_obss_pd_threshold: WMI send for set cmd obss pd threshold failed [ 42.674374] wlan: [3852:E:ANY] ol_ath_set_obss_pd_enable_bit: Could not set obss pd thresh enable val [ 42.674381] wlan: [3852:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty [ 42.674392] wlan: [3852:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 32768 [ 42.674424] wlan: [3852:I:ANY] __ol_ath_attach: hard_header_len reservation 74 [ 42.674446] wlan: [3852:I:ANY] wlan_cfg80211_init: Number of 2G channels: 11 [ 42.674643] wlan: [3852:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0xffffffc02b730880, wdev: 0xffffffc02b739b40, wiphy: 0xffffffc02f09e2a0, netdev: 0xffffffc02b730000 [ 42.675099] wlan: [3852:I:ANY] ol_ath_thermal_mitigation_attach: ol_ath_thermal_mitigation_attach: TT not supported in FW [ 42.675099] [ 42.675113] wlan: [3852:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 1 [ 42.675342] wlan: [3852:E:QLD] qld_register: Handle or address is NULL [ 42.675367] wlan: [3852:I:ANY] wlan_pdev_operation: num_radios=3, wifi_radios[2].sc = ffffffc02b730880_radio_type = 2 [ 42.675380] Event 0x3 is registered for RC 0 [ 42.684452] ADANT_SPI:INF: adant_spi_init_module:194: adant-spi 1.6 [ 42.684472] ADANT_SPI:INF: adant_spi_init_module:208: pin_sclk (GPIO:21) init (0) [ 42.684729] ADANT_SPI:INF: adant_spi_init_module:217: pin_mosi (GPIO:22) init (0) [ 42.699117] ADANT: Adant Smart Antenna Driver: Version 5.0-ZX [ 42.699161] ADANT: Hardware SmartAntenna Model: AD442 (2) [ 43.542823] wlan: [4544:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :bc:cf:4f:6f:95:75 ret: 0 [ 43.551364] wlan: [1113:E:ANY] [soc1] FWLOG: [43210] WHAL_ERROR_RESET_PM ( ) [ 43.551364] [ 43.551381] wlan: [1113:E:ANY] [soc1] FWLOG: [43214] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1) [ 43.551381] [ 43.551389] wlan: [1113:E:ANY] [soc1] FWLOG: [43220] WHAL_ERROR_RESET_PM ( ) [ 43.551389] [ 43.551398] wlan: [1113:E:ANY] [soc1] FWLOG: [43225] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1) [ 43.551398] [ 43.551405] wlan: [1113:E:ANY] [soc1] FWLOG: [43225] WHAL_ERROR_RESET_PM ( ) [ 43.551405] [ 43.551414] wlan: [1113:E:ANY] [soc1] FWLOG: [43230] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1) [ 43.551414] [ 43.551423] wlan: [1113:E:ANY] [soc1] FWLOG: [43230] WAL_DBGID_PDEV_INFO_PRINT ( 0x16, 0x10, 0x10) [ 43.551423] [ 43.569057] zy_reg_modify_chan_list :Country code does not match, current country is 276, zy channel is for 0 [ 43.569739] wlan: [4548:I:ANY] wlan_scan_update_channel_list: num_chan: 13 [ 43.569831] wlan: [4548:I:ANY] ieee80211_setctry_tryretaining_curchan: [467] Skipping current channel retention during set_country operation [ 43.569851] wlan: [4548:I:ANY] number of channels: 2G = 13 5G = 0, 6G = 0 [ 43.599756] wlan: [4555:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :bc:cf:4f:6f:95:76 ret: 0 [ 43.625922] zy_reg_modify_chan_list :Country code does not match, current country is 276, zy channel is for 0 [ 43.627090] wlan: [4559:I:ANY] wlan_scan_update_channel_list: num_chan: 19 [ 43.627257] wlan: [4559:E:ANY] dfs_init_chan_state_array: channel state array initialized [ 43.628317] wlan: [4559:I:ANY] wlan_scan_update_channel_list: num_chan: 19 [ 43.628423] wlan: [4559:I:ANY] ieee80211_setctry_tryretaining_curchan: [467] Skipping current channel retention during set_country operation [ 43.628441] wlan: [4559:I:ANY] number of channels: 2G = 0 5G = 19, 6G = 0 [ 43.657686] wlan: [4566:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :bc:cf:4f:6f:95:77 ret: 0 [ 43.683381] zy_reg_modify_chan_list :Country code does not match, current country is 276, zy channel is for 0 [ 43.684771] wlan: [4570:I:ANY] wlan_scan_update_channel_list: num_chan: 32 [ 43.684871] wlan: [4570:E:ANY] dfs_init_chan_state_array: channel state array initialized [ 43.685735] wlan: [4570:I:ANY] wlan_scan_update_channel_list: num_chan: 32 [ 43.685783] wlan: [4570:I:ANY] ieee80211_setctry_tryretaining_curchan: [467] Skipping current channel retention during set_country operation [ 43.685803] wlan: [4570:I:ANY] number of channels: 2G = 13 5G = 19, 6G = 0 [ 43.763863] wlan: [4581:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: wlan-3-1 : clone params: 0x00008001 [ 43.763920] wlan: [4581:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES [ 43.763974] wlan: [4581:I:ANY] osifp_create_wlan_vap: VDEV Create bc:cf:4f:6f:95:77 [ 43.764020] wlan: [4581:I:ANY] wlan_vap_create: devhandle=0xffffffc02b730880, opmode=IEEE80211_M_HOSTAP, flags=0x8001 [ 43.764020] [ 43.764182] wlan: [4581:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 43.764227] wlan: [4581:I:ANY] MBO Initialized [ 43.764234] wlan: [4581:I:ANY] OCE Initialized [ 43.764256] wlan: [4581:E:CMN_MLME] tgt_vdev_mgr_set_param_send: VDEV_0: Tx Ops Error : 16 [ 43.764390] wlan: [4581:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:1 [ 43.764857] wlan: [4581:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:0 pdev_id:0 [ 43.764857] [ 43.765429] wlan: [4581:I:ANY] VAP device wlan-3-1 created osifp: (ffffffc03b466880) os_if: (ffffffc02af68000) [ 43.779991] wlan: [4591:I:ANY] ol_ath_set_config_param: Setting FW recovery to 1 [ 43.780006] cnss_set_recovery_enabled: Failed to get plat_priv [ 43.782510] 8021q: adding VLAN 0 to HW filter on device wlan-3-1 [ 43.782525] ospriv_vlan_add_vid: ignore vlan 0 setting [ 44.551334] wlan: [108:E:ANY] [soc1] FWLOG: [44255] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x30, 0x30) [ 44.551334] [ 53.717794] wlan: [4600:I:ANY] DES SSID SET=fPPVONBl [ 53.717982] wlan: [4600:I:ANY] wlan_cfg80211_chan_to_phymode: band:1 width: 1 channel_cfreq: 5180 center_freq1: 5180 chandef.center_freq2: 0 flags: 0 [ 53.717999] wlan: [4600:I:ANY] HT Support: (null) VHT Support: (null) HE Support: (null) [ 53.718011] wlan: [4600:I:ANY] Max supported wireless mode: 0 [ 53.718023] wlan: [4600:I:ANY] Phymode: 1 [ 53.718023] [ 53.718192] wlan: [4600:I:ANY] ieee80211_ucfg_set_freq_internal: [ 53.718192] Channel is configured already!! [ 53.718340] wlan: [4600:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled [ 53.718510] wlan: [0:E:ANY] ol_get_rate_code: Rate code not found [ 53.718510] [ 54.284549] sh (2721): drop_caches: 3 [ 54.293163] sh (2721): drop_caches: 3 [ 54.554237] wlan: [108:E:ANY] [soc1] FWLOG: [54531] VDEV_MGR_DEFINITION_START ( 0x1234000, 0x143c, 0x2, 0x0, 0x0) [ 54.554237] [ 58.969751] ip_reputation_exit [ 61.628652] vlan1: renamed from eth0.1 [ 61.666085] IPv6: ADDRCONF(NETDEV_UP): vlan1: link is not ready [ 61.666270] IPv6: ADDRCONF(NETDEV_UP): vlan1: link is not ready [ 61.707768] IPv6: ADDRCONF(NETDEV_UP): vlan1: link is not ready [ 61.712054] device vlan1 entered promiscuous mode [ 61.712066] device eth0 entered promiscuous mode [ 61.725652] IPv6: ADDRCONF(NETDEV_UP): vlan1: link is not ready [ 61.731902] netlink: 12 bytes leftover after parsing attributes in process `ip'. [ 61.731915] netlink: 12 bytes leftover after parsing attributes in process `ip'. [ 63.374378] receive msg: 02 [ 63.374388] no net device found for wds-1-10 [ 63.374408] receive msg: 02 [ 63.374411] no net device found for psta-1-12 [ 63.374418] receive msg: 02 [ 63.374421] no net device found for wds-2-10 [ 63.374428] receive msg: 02 [ 63.374431] no net device found for psta-2-12 [ 63.374642] receive msg: 02 [ 63.374699] receive msg: 02 [ 63.374749] receive msg: 02 [ 63.374752] no net device found for mld10 [ 63.744353] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 63.744533] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 64.874277] nss-dp 3a003000.dp1 eth0: PHY Link up speed: 1000 [ 64.874494] br0: port 1(vlan1) entered forwarding state [ 64.874509] br0: port 1(vlan1) entered forwarding state [ 64.874581] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 67.878896] receive msg: 01 [ 67.878910] hash_idx: 181 [ 67.878917] add link eth0, blk_mc:0, link_tbl_cnt=1 [ 71.617277] zy_reg_modify_chan_list :Modify channel list for NL:528-2G [ 71.617976] wlan: [6905:I:ANY] wlan_scan_update_channel_list: num_chan: 13 [ 71.618022] wlan: [6905:I:ANY] ieee80211_setctry_tryretaining_curchan: [467] Skipping current channel retention during set_country operation [ 71.618041] wlan: [6905:I:ANY] number of channels: 2G = 13 5G = 0, 6G = 0 [ 71.624224] zy_reg_modify_chan_list :Country code does not match, current country is 528, zy channel is for 0 [ 71.625222] wlan: [6907:I:ANY] wlan_scan_update_channel_list: num_chan: 32 [ 71.625335] wlan: [6907:E:ANY] dfs_init_chan_state_array: channel state array initialized [ 71.626218] wlan: [6907:I:ANY] wlan_scan_update_channel_list: num_chan: 32 [ 71.626376] wlan: [0:E:ANY] ol_get_rate_code: Rate code not found [ 71.626376] [ 71.626423] wlan: [6907:I:ANY] number of channels: 2G = 13 5G = 19, 6G = 0 [ 71.628052] wlan: [0:I:RPTR] RPTR Same ssid disable:1 [ 71.628052] [ 71.640225] wlan: [6912:I:ANY] ol_ath_set_config_param: Resetting spectral chainmask to Rx chainmask [ 71.640225] [ 71.663040] wlan: [6924:I:ANY] ol_ath_set_config_param: DCS: dcs enable value 0 return value 0 [ 71.717167] wlan: [6929:I:ANY] wlan_cfg80211_he_bss_color: wlan_cfg80211_he_bss_color: value: 36 override: 0 ret: 0 [ 71.738496] wlan: [6939:E:ANY] ieee80211_mbss_mode_switch_sanity: Radio does not support wideband (5-7GHz), cannot perform mode switch [ 71.738510] wlan: [6939:E:ANY] ol_ath_set_config_param: Sanity check for MBSS mode switch failed [ 71.819404] wlan: [6965:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: wlan-1-1 : clone params: 0x00000001 [ 71.819444] wlan: [6965:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES [ 71.819465] wlan: [6965:I:ANY] osifp_create_wlan_vap: VDEV Create bc:cf:4f:6f:95:75 [ 71.819514] wlan: [6965:I:ANY] wlan_vap_create: devhandle=0xffffffc02f7e0880, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 71.819514] [ 71.819698] wlan: [6965:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 71.819725] wlan: [6965:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 [ 71.819731] wlan: [6965:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x7b [ 71.819743] wlan: [6965:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 71.819786] wlan: [6965:I:ANY] MBO Initialized [ 71.819793] wlan: [6965:I:ANY] OCE Initialized [ 71.819839] wlan: [6965:E:CMN_MLME] wlan_vdev_mlme_get_cmpt_obj: MLME component object is NULL [ 71.819845] wlan: [6965:E:CMN_MLME] wlan_vdev_mlme_get_cmpt_obj: MLME component object is NULL [ 71.819851] wlan: [6965:E:CMN_MLME] wlan_vdev_mlme_get_cmpt_obj: MLME component object is NULL [ 71.834168] wlan: [6965:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 71.834635] wlan: [6965:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:0 pdev_id:1 [ 71.834635] [ 71.835370] wlan: [6965:I:ANY] VAP device wlan-1-1 created osifp: (ffffffc02b9d6880) os_if: (ffffffc02ab48000) [ 71.841721] wlan: [6977:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 71.902324] wlan: [7010:I:ANY] ieee80211_ucfg_setparam_util: Set DSCP override 0 [ 71.914714] wlan: [7018:I:ANY] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 [ 71.914714] [ 72.013350] wlan: [7068:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME [ 72.028328] wlan: [7073:I:ANY] wlan_set_param: wlan_set_param : This basic rate disable mask is already configured. Please try a different value. [ 72.097396] mc_attach: enabled snooping on br0. [ 72.446025] 8021q: adding VLAN 0 to HW filter on device wlan-1-1 [ 72.446040] ospriv_vlan_add_vid: ignore vlan 0 setting [ 72.513979] device wlan-1-1.1 entered promiscuous mode [ 72.513993] device wlan-1-1 entered promiscuous mode [ 72.514069] br0: port 2(wlan-1-1.1) entered forwarding state [ 72.514083] br0: port 2(wlan-1-1.1) entered forwarding state [ 72.538763] wlan: [7192:I:ANY] DES SSID SET=24GHz_IoT [ 72.538790] wlan: [7192:I:ANY] desired hw mode: 23 [ 72.539186] wlan: [7192:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled [ 72.552571] wlan: [108:E:ANY] [soc1] FWLOG: [72867] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x30, 0x30) [ 72.552571] [ 72.552588] wlan: [108:E:ANY] [soc1] FWLOG: [72869] VDEV_MGR_DEFINITION_START ( 0x1234000, 0x143c, 0x2, 0x0, 0x0) [ 72.552588] [ 72.803886] mc_attach: bridge br0 is already attached [ 72.817734] wlan: [7310:E:SPECTRAL] ucfg_spectral_is_mode_specific_request: Invalid spectral cp request id 10 [ 72.879864] wlan: [7364:I:ANY] ieee80211_ucfg_set_freq_internal: [ 72.879864] Channel is configured already!! [ 72.892331] wlan: [7376:I:ANY] ieee80211_ucfg_set_txpow: Exceeding the regulatory txpower of 20 dBm [ 74.733335] zy_reg_modify_chan_list :Modify channel list for NL:528-5G [ 74.734592] wlan: [8694:I:ANY] wlan_scan_update_channel_list: num_chan: 19 [ 74.734780] wlan: [8694:E:ANY] dfs_init_chan_state_array: channel state array initialized [ 74.735871] wlan: [8694:I:ANY] wlan_scan_update_channel_list: num_chan: 19 [ 74.735984] wlan: [8694:I:ANY] ieee80211_setctry_tryretaining_curchan: [467] Skipping current channel retention during set_country operation [ 74.736048] wlan: [8694:I:ANY] number of channels: 2G = 0 5G = 19, 6G = 0 [ 74.744731] zy_reg_modify_chan_list :Country code does not match, current country is 528, zy channel is for 0 [ 74.745798] wlan: [8697:I:ANY] wlan_scan_update_channel_list: num_chan: 32 [ 74.745970] wlan: [8697:E:ANY] dfs_init_chan_state_array: channel state array initialized [ 74.746878] wlan: [8697:I:ANY] wlan_scan_update_channel_list: num_chan: 32 [ 74.747155] wlan: [0:E:ANY] ol_get_rate_code: Rate code not found [ 74.747155] [ 74.747236] wlan: [8697:I:ANY] number of channels: 2G = 13 5G = 19, 6G = 0 [ 74.749315] wlan: [0:I:RPTR] RPTR Same ssid disable:1 [ 74.749315] [ 74.766459] wlan: [8714:I:ANY] ol_ath_set_config_param: Resetting spectral chainmask to Rx chainmask [ 74.766459] [ 74.780703] wlan: [8731:I:ANY] ol_ath_set_config_param: DCS: dcs enable value 0 return value 0 [ 74.803545] wlan: [8737:I:ANY] wlan_cfg80211_he_bss_color: wlan_cfg80211_he_bss_color: value: 45 override: 0 ret: 0 [ 74.825345] wlan: [8747:E:ANY] ieee80211_mbss_mode_switch_sanity: Radio does not support wideband (5-7GHz), cannot perform mode switch [ 74.825357] wlan: [8747:E:ANY] ol_ath_set_config_param: Sanity check for MBSS mode switch failed [ 74.862700] wlan: [8773:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: wlan-2-1 : clone params: 0x00000001 [ 74.862739] wlan: [8773:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES [ 74.862754] wlan: [8773:I:ANY] osifp_create_wlan_vap: VDEV Create bc:cf:4f:6f:95:76 [ 74.862798] wlan: [8773:I:ANY] wlan_vap_create: devhandle=0xffffffc02f760880, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 74.862798] [ 74.862970] wlan: [8773:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 74.863006] wlan: [8773:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 [ 74.863012] wlan: [8773:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x7b [ 74.863031] wlan: [8773:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 74.863073] wlan: [8773:I:ANY] MBO Initialized [ 74.863079] wlan: [8773:I:ANY] OCE Initialized [ 74.863124] wlan: [8773:E:CMN_MLME] wlan_vdev_mlme_get_cmpt_obj: MLME component object is NULL [ 74.863130] wlan: [8773:E:CMN_MLME] wlan_vdev_mlme_get_cmpt_obj: MLME component object is NULL [ 74.863135] wlan: [8773:E:CMN_MLME] wlan_vdev_mlme_get_cmpt_obj: MLME component object is NULL [ 74.874195] wlan: [8773:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 74.874626] wlan: [8773:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:1 pdev_id:0 [ 74.874626] [ 74.875292] wlan: [8773:I:ANY] VAP device wlan-2-1 created osifp: (ffffffc02b8a4880) os_if: (ffffffc033428000) [ 74.883357] wlan: [8787:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 74.940606] wlan: [8818:I:ANY] ieee80211_ucfg_setparam_util: Set DSCP override 0 [ 74.952383] wlan: [8826:I:ANY] ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 [ 74.952383] [ 75.047786] wlan: [8877:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME [ 75.119614] wlan: [8945:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: wlan-2-2 : clone params: 0x00000001 [ 75.119661] wlan: [8945:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES [ 75.119676] wlan: [8945:I:ANY] osifp_create_wlan_vap: VDEV Create be:76:4f:6f:95:77 [ 75.119723] wlan: [8945:I:ANY] wlan_vap_create: devhandle=0xffffffc02f760880, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 75.119723] [ 75.119878] wlan: [8945:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 75.119913] wlan: [8945:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 [ 75.119921] wlan: [8945:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x7b [ 75.119934] wlan: [8945:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 75.119979] wlan: [8945:I:ANY] MBO Initialized [ 75.119986] wlan: [8945:I:ANY] OCE Initialized [ 75.121231] mc_attach: bridge br0 is already attached [ 75.134196] wlan: [8945:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 75.134669] wlan: [8945:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:2 pdev_id:0 [ 75.134669] [ 75.135294] wlan: [8945:I:ANY] VAP device wlan-2-2 created osifp: (ffffffc02ae08880) os_if: (ffffffc033528000) [ 75.142268] wlan: [8965:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 75.197856] wlan: [8997:I:ANY] ieee80211_ucfg_setparam_util: Set DSCP override 0 [ 75.209325] wlan: [9005:I:ANY] ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 [ 75.209325] [ 75.303038] wlan: [9056:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME [ 75.378651] mc_attach: bridge br0 is already attached [ 75.515508] 8021q: adding VLAN 0 to HW filter on device wlan-2-1 [ 75.515522] ospriv_vlan_add_vid: ignore vlan 0 setting [ 75.552653] wlan: [1118:E:ANY] [soc1] FWLOG: [76063] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x30, 0x30) [ 75.552653] [ 75.552670] wlan: [1118:E:ANY] [soc1] FWLOG: [76065] VDEV_MGR_DEFINITION_START ( 0x1234000, 0x143c, 0x2, 0x0, 0x0) [ 75.552670] [ 75.588511] device wlan-2-1.1 entered promiscuous mode [ 75.588523] device wlan-2-1 entered promiscuous mode [ 75.588587] br0: port 3(wlan-2-1.1) entered forwarding state [ 75.588602] br0: port 3(wlan-2-1.1) entered forwarding state [ 75.612336] wlan: [9196:I:ANY] DES SSID SET=MainNetwork-5GHz [ 75.612362] wlan: [9196:I:ANY] desired hw mode: 30 [ 75.612825] wlan: [9196:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled [ 75.859719] 8021q: adding VLAN 0 to HW filter on device wlan-2-2 [ 75.859734] ospriv_vlan_add_vid: ignore vlan 0 setting [ 75.863346] mc_attach: bridge br0 is already attached [ 75.970241] mc_attach: enabled snooping on localbr40. [ 75.971806] hostvlan40: renamed from eth0.40 [ 75.983193] wlan: [0:I:ANY] ol_ath_vap_set_param: Now supported CTRL RATE is:12000 kbps, rate code:0x10000002 [ 75.983244] wlan: [0:I:ANY] ol_ath_vap_set_param: Now supported CTRL RATE is:12000 kbps, rate code:0x10000002 [ 76.005050] device hostvlan40 entered promiscuous mode [ 76.011287] localbr40: port 1(hostvlan40) entered forwarding state [ 76.011321] localbr40: port 1(hostvlan40) entered forwarding state [ 76.011622] device wlan-2-2.40 entered promiscuous mode [ 76.011630] device wlan-2-2 entered promiscuous mode [ 76.011701] localbr40: port 2(wlan-2-2.40) entered forwarding state [ 76.011718] localbr40: port 2(wlan-2-2.40) entered forwarding state [ 76.035293] wlan: [9272:I:ANY] DES SSID SET=Nepumuk [ 76.035320] wlan: [9272:I:ANY] desired hw mode: 30 [ 76.035578] wlan: [9272:I:ANY] ieee80211_ucfg_set_freq_internal: [ 76.035578] Channel is configured already!! [ 76.035685] wlan: [9272:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled [ 76.037193] wlan: [0:I:ANY] ol_ath_vap_set_param: Now supported CTRL RATE is:12000 kbps, rate code:0x10000002 [ 76.037240] wlan: [0:I:ANY] ol_ath_vap_set_param: Now supported CTRL RATE is:12000 kbps, rate code:0x10000002 [ 76.116972] wlan: [9444:D:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_control: enable detects, ignore_dfs 0 [ 76.146517] mc_attach: bridge br0 is already attached [ 76.182486] wlan: [9511:I:ANY] ieee80211_ucfg_set_freq_internal: [ 76.182486] Channel is configured already!! [ 76.185284] mc_attach: bridge localbr40 is already attached [ 76.236295] wlan: [9562:I:ANY] ieee80211_ucfg_set_freq_internal: [ 76.236295] Channel is configured already!! [ 76.249802] wlan: [9574:I:ANY] ieee80211_ucfg_set_txpow: Exceeding the regulatory txpower of 23 dBm [ 76.994402] wlan: [4611:I:ANY] wlan_cfg80211_get_country: wlan_cfg80211_get_country: Country: NL ret: 0 [ 76.994498] wlan: [4611:I:ANY] wlan_cfg80211_get_country: wlan_cfg80211_get_country: Country: NL ret: 0 [ 76.994965] wlan: [0:E:ANY] ieee80211_acs_stats_update: Received Stats_NF without Stats_Diff - prev chan (5180MHz), event (0x1) [ 78.389474] dhcp6c[5895]: unhandled level 0 translation fault (11) at 0x17076972cd80, esr 0x92000004 [ 78.389486] pgd = ffffffc02a9dd000 [ 78.389492] [17076972cd80] *pgd=0000000000000000, *pud=0000000000000000 [ 78.389498] [ 78.389508] CPU: 1 PID: 5895 Comm: dhcp6c Tainted: P 4.4.60 #1 [ 78.389513] Hardware name: Qualcomm Technologies, Inc. IPQ807x/AP-HK09 (DT) [ 78.389519] task: ffffffc02af8d400 ti: ffffffc02af8d400 task.ti: ffffffc02af8d400 [ 78.389527] PC is at 0x407684 [ 78.389532] LR is at 0x4062a8 [ 78.389537] pc : [<0000000000407684>] lr : [<00000000004062a8>] pstate: 60000000 [ 78.389542] sp : 0000007fef6250a0 [ 78.389546] x29: 0000007fef6250a0 x28: 000000000000000a [ 78.389553] x27: 0000007fef626d87 x26: 0000007fef6259e8 [ 78.389560] x25: 000000000042f878 x24: 0000000000417b71 [ 78.389567] x23: 000000000042e000 x22: 0000007faf40d340 [ 78.389574] x21: 0000007fef625110 x20: 000000000042fda0 [ 78.389580] x19: 000000000042fec0 x18: 0000000000000000 [ 78.389587] x17: 0000007faf3e9b1c x16: 000000000042e6d8 [ 78.389593] x15: 0036837938bcaf5a x14: 0000000000000000 [ 78.389599] x13: 0000000000000000 x12: 0000000000000018 [ 78.389606] x11: 0000000036837938 x10: 000000006972cd5f [ 78.389612] x9 : 0000000000000010 x8 : 0000000000000039 [ 78.389619] x7 : 0000000000000000 x6 : 0000000000000000 [ 78.389625] x5 : 0000000000000000 x4 : 0000000000000000 [ 78.389631] x3 : 0000000000000000 x2 : 0000000000000000 [ 78.389637] x1 : 000017076972cd60 x0 : 000000000042fec0 [ 78.389643]