~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.2.54 (root@twsvnnt01652-01) (gcc version 4.8.5 20150209 (prerelease) (crosstool-NG 1.21.0) ) #1 SMP Fri Mar 29 17:12:42 CST 2024 [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=50c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Comcerto 2000 EVM [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] Comcerto: zone_dma mapping size=2c00000 type=b [ 0.000000] On node 0 totalpages: 257024 [ 0.000000] free_area_init_node: node 0, pgdat 849fdc00, node_mem_map 84a62000 [ 0.000000] DMA zone: 88 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 11176 pages, LIFO batch:1 [ 0.000000] Normal zone: 1960 pages used for memmap [ 0.000000] Normal zone: 243800 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @85268000 s9504 r8192 d15072 u32768 [ 0.000000] pcpu-alloc: s9504 r8192 d15072 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254976 [ 0.000000] Kernel command line: console=ttyS0,115200n8, init=/etc/preinit pcie_gen1_only=yes mac_addr=,, ip=dhcp root=ubi0:rootfs ubi.mtd=2,2048 rootfstype=ubifs rw noinitrd mtdparts=spi0.0:256k(uloader)ro,512k(barebox)ro,256k(env);comcertonand:10M(config),10M(kernel1),110M(rootfs1),10M(kernel2),110M(rootfs2),-(reserved) usb3_internal_clk=yes [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 44MB 960MB = 1004MB total [ 0.000000] Memory: 1008396k/1008396k available, 40180k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff30000 - 0xfffe0000 ( 704 kB) [ 0.000000] vmalloc : 0xc0800000 - 0xf0000000 ( 760 MB) [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB) [ 0.000000] modules : 0x83600000 - 0x84000000 ( 10 MB) [ 0.000000] .text : 0x84008000 - 0x8468b460 (6670 kB) [ 0.000000] .init : 0x8468c000 - 0x849b6520 (3242 kB) [ 0.000000] .data : 0x849b8000 - 0x84a00bb0 ( 291 kB) [ 0.000000] .bss : 0x84a00bd4 - 0x84a61218 ( 386 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:256 [ 0.000000] PLL0 running at 2400 MHz, PLL1 at 1000 MHz PLL2 running at 1500 MHz PLL3 running at 1066 MHz [ 0.000000] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 17179ms [ 0.000189] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 0.090048] pid_max: default: 32768 minimum: 301 [ 0.090248] Mount-cache hash table entries: 512 [ 0.090776] Initializing cgroup subsys cpuacct [ 0.090809] Initializing cgroup subsys devices [ 0.090844] CPU: Testing write buffer coherency: ok [ 0.091008] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 [ 0.091037] Calibrating local timer... 299.84MHz. [ 0.150068] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.151163] CPU1 powered up [ 0.151763] CPU1: Booted secondary processor [ 0.190038] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901 [ 0.190094] Brought up 2 CPUs [ 0.190106] SMP: Total of 2 processors activated (2393.70 BogoMIPS). [ 0.191634] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 0.192023] xor: measuring software checksum speed [ 0.239991] arm4regs : 2129.600 MB/sec [ 0.289965] 8regs : 1397.600 MB/sec [ 0.339937] 32regs : 1186.000 MB/sec [ 0.389918] neon : 1383.600 MB/sec [ 0.389926] xor: using function: arm4regs (2129.600 MB/sec) [ 0.390113] NET: Registered protocol family 16 [ 0.391851] L310 cache controller enabled [ 0.391865] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B [ 0.391945] ARMv7 AUX CTRL(0): 0x41 [ 0.391950] ARMv7 AUX CTRL(0): 0x41 [ 0.391965] ARMv7 AUX CTRL(1): 0x41 [ 0.391974] ARMv7 AUX CTRL(1): 0x41 [ 0.392898] Pin Select for GPIO[15:0]: 05000000 [ 0.392906] Pin Select for GPIO[31:16]: 00555540 [ 0.392912] Output Enable for GPIO[31:0]: DFFFFF00 [ 0.392918] Pin Select for GPIO[59:32]: 0FFFFFFE [ 0.392923] Pin Select for GPIO[63:60]: 00000020 [ 0.392928] Output Enable for GPIO[63:32]: 00000001 [ 0.392934] Enable HD1 ... [ 0.392938] Enable HD3 ... [ 6.396891] Enable HD2 ... [ 6.396898] Enable HD4 ... [ 12.403864] Enable USB ... [ 12.405149] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 12.405160] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 12.405175] Power Management Mode Support For C2000: [ 12.405542] PCIe: Ref clk 48Mhz [ 12.405550] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6 [ 12.422152] PCIe0: Link Up Success [ 12.422158] PCIe0: Polarity: 0 Gen1 mode: 1 External Clk: 0 [ 12.422164] comcerto_pcie_rc_int_init [ 12.422385] pci 0000:00:00.0: [1b21:0612] type 0 class 0x000106 [ 12.422447] pci 0000:00:00.0: reg 24: [mem 0x00000000-0x000001ff] [ 12.422463] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 12.422565] PCI: bus0: Fast back to back transfers disabled [ 12.422751] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref] [ 12.422762] pci 0000:00:00.0: BAR 5: assigned [mem 0xa0010000-0xa00101ff] [ 12.422776] pci 0000:00:00.0: BAR 5: set to [mem 0xa0010000-0xa00101ff] (PCI address [0xa0010000-0xa00101ff]) [ 12.449554] bio: create slab at 0 [ 12.614902] raid6: int32x1 32 MB/s [ 12.784180] raid6: int32x2 49 MB/s [ 12.954065] raid6: int32x4 84 MB/s [ 13.123727] raid6: int32x8 119 MB/s [ 13.293448] raid6: neonx1 144 MB/s [ 13.463338] raid6: neonx2 177 MB/s [ 13.633337] raid6: neonx4 199 MB/s [ 13.803413] raid6: neonx8 201 MB/s [ 13.803419] raid6: using algorithm neonx8 (201 MB/s) [ 13.803725] vgaarb: loaded [ 13.804257] SCSI subsystem initialized [ 13.804603] libata version 3.00 loaded. [ 13.805152] usbcore: registered new interface driver usbfs [ 13.805385] usbcore: registered new interface driver hub [ 13.805543] usbcore: registered new device driver usb [ 13.806583] Switching to clocksource timer2 [ 13.816270] NET: Registered protocol family 2 [ 13.816482] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.817283] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.818635] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 13.819251] TCP: Hash tables configured (established 131072 bind 65536) [ 13.819259] TCP reno registered [ 13.819271] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 13.819326] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 13.819680] NET: Registered protocol family 1 [ 13.820025] RPC: Registered named UNIX socket transport module. [ 13.820033] RPC: Registered udp transport module. [ 13.820039] RPC: Registered tcp transport module. [ 13.820044] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.820067] PCI: CLS 32 bytes, default 32 [ 14.054606] gpio_dev = fd00000 [ 14.058974] membuf_init: created membuf device(252, 0) [ 14.059038] clock_frequency_set: (1:24) NTG INCR value is 422212465 [ 14.086892] VFS: Disk quotas dquot_6.5.2 [ 14.087077] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 14.087993] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 14.088008] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 14.088808] fuse init (API version 7.17) [ 14.090067] Btrfs loaded [ 14.090102] msgmni has been set to 1969 [ 14.095383] async_tx: api initialized (async) [ 14.095833] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 14.095845] io scheduler noop registered [ 14.095850] io scheduler deadline registered [ 14.095951] io scheduler cfq registered (default) [ 14.099447] ### comcerto_dma_probe: XOR DMA channel registered [ 14.107469] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 14.287062] 84a546a0 849cb858 0 ffffffff [ 14.287873] serial8250 serial8250.0: Couldn't set LCR to 191 [ 14.289150] serial8250 serial8250.0: Couldn't set LCR to 191 [ 14.290424] serial8250 serial8250.0: Couldn't set LCR to 224 [ 14.291699] serial8250 serial8250.0: Couldn't set LCR to 224 [ 14.311737] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A [ 15.033166] console [ttyS0] enabled [ 15.080081] comcerto_otp_probe. [ 15.130764] loop: module loaded [ 15.144256] ahci 0000:00:00.0: version 3.0 [ 15.144276] PCI: enabling device 0000:00:00.0 (0140 -> 0142) [ 15.150104] ahci: SSS flag set, parallel bus scan disabled [ 15.155650] ahci 0000:00:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 15.163788] ahci 0000:00:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 15.189481] scsi0 : ahci [ 15.197804] scsi1 : ahci [ 15.201780] ata1: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010100 irq 96 [ 15.209171] ata2: SATA max UDMA/133 abar m512@0xa0010000 port 0xa0010180 irq 96 [ 15.217446] SATA Serdes: 48Mhz ref clk [ 15.221702] Serdes1: Lane OK Passed [ 15.225683] Serdes2: Lane OK Passed [ 15.229204] ahci ahci: forcing PORTS_IMPL to 0x3 [ 15.233891] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode [ 15.241687] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 15.265921] scsi2 : ahci_platform [ 15.275051] scsi3 : ahci_platform [ 15.280317] ata3: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48 [ 15.288297] ata4: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48 [ 15.297011] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(DUS)=250000000 Hz [ 15.308101] comcerto_spi comcerto_spi.1: at 0x96500000 mapped to 0xC080A000, irq=60 [ 15.315824] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=250000000 Hz [ 15.338221] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xC080C000, irq=61 [ 15.367044] comcertoflash: probe of comcertoflash.0 failed with error -5 [ 15.374214] m25p80 spi0.0: found mx25l8005, expected s25fl256s0 [ 15.380200] m25p80 spi0.0: mx25l8005 (1024 Kbytes) [ 15.385027] 3 cmdlinepart partitions found on MTD device spi0.0 [ 15.390979] Creating 3 MTD partitions on "spi0.0": [ 15.395785] 0x000000000000-0x000000040000 : "uloader" [ 15.407705] 0x000000040000-0x0000000c0000 : "barebox" [ 15.424800] 0x0000000c0000-0x000000100000 : "env" [ 15.441490] pdev->resource->start = c8300000, pdev->resource->end = c8301fff [ 15.448601] nand_probe: comcertonand base: 0xc0800000 [ 15.453775] NAND device: Manufacturer ID: 0x98, Chip ID: 0xda (Toshiba NAND 256MiB 3,3V 8-bit) [ 15.462424] hw_syndrome correction 2048. [ 15.466355] Using default values for hw ecc [ 15.473847] Bad block table not found for chip 0 [ 15.481728] Bad block table not found for chip 0 [ 15.486356] Scanning device for bad blocks [ 15.546414] Bad eraseblock 1451 at 0x00000b560000 [ 15.554376] Bad eraseblock 1536 at 0x00000c000000 [ 15.559136] Bad eraseblock 1537 at 0x00000c020000 [ 15.585372] Bad block table written to 0x00000ffe0000, version 0x01 [ 15.593758] Bad block table written to 0x00000ffc0000, version 0x01 [ 15.600094] 6 cmdlinepart partitions found on MTD device comcertonand [ 15.606552] Creating 6 MTD partitions on "comcertonand": [ 15.611901] 0x000000000000-0x000000a00000 : "config" [ 15.623261] 0x000000a00000-0x000001400000 : "kernel1" [ 15.639796] 0x000001400000-0x000008200000 : "rootfs1" [ 15.651189] 0x000008200000-0x000008c00000 : "kernel2" [ 15.667616] 0x000008c00000-0x00000fa00000 : "rootfs2" [ 15.679527] 0x00000fa00000-0x000010000000 : "reserved" [ 15.709975] Fixed MDIO Bus: probed [ 15.714036] ## xhci_plat_probe [ 15.717160] ### comcerto_start_xhci [ 15.720674] USB3.0 clock selected: internal [ 15.728138] xhci-hcd xhci-hcd: xHCI Host Controller [ 15.733105] drivers/usb/core/inode.c: creating file 'devices' [ 15.733119] drivers/usb/core/inode.c: creating file '001' [ 15.733132] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1 [ 15.740377] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000 [ 15.745737] usb usb1: default language 0x0409 [ 15.745758] usb usb1: udev 1, busnum 1, minor = 0 [ 15.745765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.752611] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.759868] usb usb1: Product: xHCI Host Controller [ 15.764759] usb usb1: Manufacturer: Linux 3.2.54 xhci-hcd [ 15.770189] usb usb1: SerialNumber: xhci-hcd [ 15.775002] usb usb1: usb_probe_device [ 15.775015] usb usb1: configuration #1 chosen from 1 choice [ 15.775027] xHCI xhci_add_endpoint called for root hub [ 15.775034] xHCI xhci_check_bandwidth called for root hub [ 15.775058] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 15.775551] hub 1-0:1.0: usb_probe_interface [ 15.775564] hub 1-0:1.0: usb_probe_interface - got id [ 15.775572] hub 1-0:1.0: USB hub found [ 15.779411] hub 1-0:1.0: 1 port detected [ 15.783356] hub 1-0:1.0: standalone hub [ 15.783365] hub 1-0:1.0: no power switching (usb 1.0) [ 15.783372] hub 1-0:1.0: individual port over-current protection [ 15.783378] hub 1-0:1.0: Single TT [ 15.783385] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 15.783393] hub 1-0:1.0: power on to power good time: 20ms [ 15.783418] hub 1-0:1.0: local power source is good [ 15.783425] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 15.787627] drivers/usb/core/inode.c: creating file '001' [ 15.787732] xhci-hcd xhci-hcd: xHCI Host Controller [ 15.792650] drivers/usb/core/inode.c: creating file '002' [ 15.792668] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2 [ 15.799740] usb usb2: skipped 1 descriptor after endpoint [ 15.799755] usb usb2: default language 0x0409 [ 15.799778] usb usb2: udev 1, busnum 2, minor = 128 [ 15.799787] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 15.806603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.813899] usb usb2: Product: xHCI Host Controller [ 15.820162] usb usb2: Manufacturer: Linux 3.2.54 xhci-hcd [ 15.825578] usb usb2: SerialNumber: xhci-hcd [ 15.830699] usb usb2: usb_probe_device [ 15.830714] usb usb2: configuration #1 chosen from 1 choice [ 15.830730] xHCI xhci_add_endpoint called for root hub [ 15.830738] xHCI xhci_check_bandwidth called for root hub [ 15.830774] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 15.833254] hub 2-0:1.0: usb_probe_interface [ 15.833266] hub 2-0:1.0: usb_probe_interface - got id [ 15.833273] hub 2-0:1.0: USB hub found [ 15.837104] hub 2-0:1.0: 1 port detected [ 15.841048] hub 2-0:1.0: standalone hub [ 15.841054] hub 2-0:1.0: no power switching (usb 1.0) [ 15.841059] hub 2-0:1.0: individual port over-current protection [ 15.841066] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 15.841073] hub 2-0:1.0: power on to power good time: 20ms [ 15.841092] hub 2-0:1.0: local power source is good [ 15.841100] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 15.846728] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 15.854145] drivers/usb/core/inode.c: creating file '001' [ 15.856737] ata4.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 15.863468] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 15.876672] hub 1-0:1.0: port 1: status 0101 change 0001 [ 15.876884] usbcore: registered new interface driver usblp [ 15.882393] Initializing USB Mass Storage driver... [ 15.894960] usbcore: registered new interface driver usb-storage [ 15.901411] USB Mass Storage support registered. [ 15.907399] dwc_otg: version 2.94a 27-OCT-2011 [ 15.918260] ata4.00: configured for UDMA/133 [ 16.113129] hub 2-0:1.0: port 1: status 0203 change 0031 [ 16.113170] Core Release: 2.81a [ 16.113182] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 16.113198] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 16.116326] Setting default values for core params [ 16.226636] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 16.271895] usb 1-1: default language 0x0409 [ 16.272639] usb 1-1: udev 2, busnum 1, minor = 1 [ 16.272647] usb 1-1: New USB device found, idVendor=174c, idProduct=2074 [ 16.279382] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 16.286537] usb 1-1: Product: ASM107x [ 16.290214] usb 1-1: Manufacturer: Asmedia [ 16.294322] usb 1-1: SerialNumber: 0000000A0003 [ 16.299379] usb 1-1: usb_probe_device [ 16.299391] usb 1-1: configuration #1 chosen from 1 choice [ 16.312155] usb 1-1: Successful Endpoint Configure command [ 16.312332] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 16.316024] hub 1-1:1.0: usb_probe_interface [ 16.316035] hub 1-1:1.0: usb_probe_interface - got id [ 16.316042] hub 1-1:1.0: USB hub found [ 16.320277] hub 1-1:1.0: 4 ports detected [ 16.320933] Using Buffer DMA mode [ 16.320938] Periodic Transfer Interrupt Enhancement - disabled [ 16.320943] Multiprocessor Interrupt Enhancement - disabled [ 16.320949] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 16.320986] dwc_otg dwc_otg.0: DWC OTG Controller [ 16.321009] drivers/usb/core/inode.c: creating file '003' [ 16.321027] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 3 [ 16.321052] dwc_otg dwc_otg.0: irq 53, io mem 0x00000000 [ 16.321082] usb usb3: default language 0x0409 [ 16.321100] usb usb3: udev 1, busnum 3, minor = 256 [ 16.321107] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 16.321114] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.321121] usb usb3: Product: DWC OTG Controller [ 16.321126] usb usb3: Manufacturer: Linux 3.2.54 dwc_otg [ 16.321131] usb usb3: SerialNumber: dwc_otg.0 [ 16.321638] usb usb3: usb_probe_device [ 16.321649] usb usb3: configuration #1 chosen from 1 choice [ 16.321673] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 16.325510] hub 3-0:1.0: usb_probe_interface [ 16.325518] hub 3-0:1.0: usb_probe_interface - got id [ 16.325524] hub 3-0:1.0: USB hub found [ 16.325542] hub 3-0:1.0: 1 port detected [ 16.325547] hub 3-0:1.0: standalone hub [ 16.325551] hub 3-0:1.0: ganged power switching [ 16.325556] hub 3-0:1.0: individual port over-current protection [ 16.325562] hub 3-0:1.0: Single TT [ 16.325567] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 16.325573] hub 3-0:1.0: power on to power good time: 2ms [ 16.325586] hub 3-0:1.0: local power source is good [ 16.325591] hub 3-0:1.0: enabling power on all ports [ 16.350963] drivers/usb/core/inode.c: creating file '001' [ 16.355297] Module dwc_common_port init [ 16.359457] mousedev: PS/2 mouse device common for all mice [ 16.372250] c2k-rtc c2k-rtc: rtc core: registered c2k as rtc0 [ 16.372257] C2000 RTC, (c) 2012 Mindspeed Technologies [ 16.380584] i2c /dev entries driver [ 16.384782] comcerto_i2c_calculate_dividers: speed=97kHz, M=1, N=7, dividers=0x0f [ 16.424231] hub 1-1:1.0: standalone hub [ 16.424238] hub 1-1:1.0: ganged power switching [ 16.424244] hub 1-1:1.0: global over-current protection [ 16.425130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 16.432024] ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 16.438765] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 16.445963] usb 1-1: Successful Endpoint Configure command [ 16.446229] hub 1-1:1.0: TT per port [ 16.446238] hub 1-1:1.0: TT requires at most 16 FS bit times (1332 ns) [ 16.446245] hub 1-1:1.0: Port indicators are supported [ 16.446252] hub 1-1:1.0: power on to power good time: 2ms [ 16.446497] usb 1-1: Successful Endpoint Configure command [ 16.446696] hub 1-1:1.0: local power source is good [ 16.446704] hub 1-1:1.0: no over-current condition exists [ 16.446711] hub 1-1:1.0: enabling power on all ports [ 16.450877] drivers/usb/core/inode.c: creating file '002' [ 16.450966] hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 16.450990] hub 2-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 16.457928] ata1.00: configured for UDMA/133 [ 16.462582] scsi 0:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5 [ 16.491573] i2c-core: driver [eeprom] using legacy suspend method [ 16.498128] i2c-core: driver [eeprom] using legacy resume method [ 16.519049] comcerto_wdt: support registered [ 16.524242] Using Buffer DMA mode [ 16.527584] Periodic Transfer Interrupt Enhancement - disabled [ 16.531775] md: linear personality registered for level -1 [ 16.531782] md: raid0 personality registered for level 0 [ 16.531787] md: raid1 personality registered for level 1 [ 16.531792] md: raid10 personality registered for level 10 [ 16.531797] md: raid6 personality registered for level 6 [ 16.531802] md: raid5 personality registered for level 5 [ 16.531807] md: raid4 personality registered for level 4 [ 16.571034] Multiprocessor Interrupt Enhancement - disabled [ 16.576628] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 16.581233] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 16.588306] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 16.596087] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 16.601418] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 16.610323] sd 0:0:0:0: [sda] Write Protect is off [ 16.615148] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 16.615550] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.625649] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 16.631464] usb 2-1: skipped 1 descriptor after endpoint [ 16.631828] usb 2-1: default language 0x0409 [ 16.632715] usb 2-1: udev 2, busnum 2, minor = 129 [ 16.632725] usb 2-1: New USB device found, idVendor=174c, idProduct=3074 [ 16.639523] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 16.640446] Init: Port Power? op_state=1 [ 16.640451] Init: Power Port (0) [ 16.653881] usb 2-1: Product: ASM107x [ 16.657670] usb 2-1: Manufacturer: Asmedia [ 16.661785] usb 2-1: SerialNumber: 0000000A0003 [ 16.672147] usb 2-1: usb_probe_device [ 16.672161] usb 2-1: configuration #1 chosen from 1 choice [ 16.679737] usb 2-1: Successful Endpoint Configure command [ 16.679949] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 16.687109] hub 2-1:1.0: usb_probe_interface [ 16.687122] hub 2-1:1.0: usb_probe_interface - got id [ 16.687130] hub 2-1:1.0: USB hub found [ 16.691198] hub 2-1:1.0: 4 ports detected [ 16.695232] hub 2-1:1.0: standalone hub [ 16.695238] hub 2-1:1.0: ganged power switching [ 16.695244] hub 2-1:1.0: global over-current protection [ 16.695252] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 16.695260] hub 2-1:1.0: power on to power good time: 120ms [ 16.696592] usbcore: registered new interface driver usbhid [ 16.702221] usbhid: USB HID core driver [ 16.705230] usb 2-1: Successful Endpoint Configure command [ 16.705448] hub 2-1:1.0: local power source is good [ 16.705455] hub 2-1:1.0: no over-current condition exists [ 16.705564] hub 2-1:1.0: enabling power on all ports [ 16.706864] etherip: Ethernet over IPv4 tunneling driver [ 16.707919] sda: sda1 sda2 sda3 [ 16.715429] etherip ----- is functional [ 16.723389] drivers/usb/core/inode.c: creating file '002' [ 16.723686] hub 3-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 16.723697] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000 [ 16.757160] TCP cubic registered [ 16.759116] sd 0:0:0:0: [sda] Attached SCSI disk [ 16.765273] NET: Registered protocol family 10 [ 16.772422] IPv6 over IPv4 tunneling driver [ 16.796259] NET: Registered protocol family 17 [ 16.800948] 8021q: 802.1Q VLAN Support v1.8 [ 16.805165] Registering the dns_resolver key type [ 16.809928] Clocks: disabled unused uart [ 16.813862] Clocks: disabled unused gemtx [ 16.817583] hub 2-1:1.0: state 7 ports 4 chg 0000 evt 0000 [ 16.817901] Clocks: disabled unused ipsec_spacc [ 16.822443] Clocks: disabled unused dpi_cie [ 16.826651] Clocks: disabled unused dpi_decomp [ 16.831108] Clocks: disabled unused pcie1 [ 16.835129] Clocks: disabled unused ext_phy0 [ 16.836640] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 16.837150] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 16.837158] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 16.837720] ata3.00: configured for UDMA/133 [ 16.863404] Clocks: disabled unused ext_phy1 [ 16.867701] Clocks: disabled unused ext_phy2 [ 16.871982] Clocks: disabled unused tpi [ 16.875826] Clocks: disabled unused csys [ 16.879769] Clocks: disabled unused tsuntg [ 16.883875] Clocks: disabled unused sata_occ [ 16.888179] Clocks: disabled unused pcie_occ [ 16.892461] Clocks: disabled unused sgmii_occ [ 16.908532] UBI: attaching mtd2 to ubi0 [ 16.915631] UBI: scanning is finished [ 16.919334] UBI error: ubi_read_volume_table: the layout volume was not found [ 16.926501] UBI error: ubi_attach_mtd_dev: failed to attach mtd2, error -22 [ 16.933504] UBI error: ubi_init: cannot attach mtd2 [ 16.938494] c2k-rtc c2k-rtc: setting system clock to 2012-07-12 18:25:01 UTC (1342117501) [ 17.216640] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 17.223445] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 17.230180] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 17.237946] ata2.00: configured for UDMA/133 [ 17.242600] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5 [ 17.254417] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 17.262235] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 17.264257] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 17.273292] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5 [ 17.281680] sd 1:0:0:0: [sdb] Write Protect is off [ 17.286501] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 17.286753] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.297448] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 17.305225] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 17.310823] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 17.310858] sd 2:0:0:0: [sdc] Write Protect is off [ 17.310866] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 17.310933] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.332736] scsi 3:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5 [ 17.341850] sdb: sdb1 sdb2 sdb3 [ 17.352379] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 17.360213] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 17.364587] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 17.374402] sd 3:0:0:0: [sdd] Write Protect is off [ 17.379308] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 17.379523] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.390086] sd 1:0:0:0: [sdb] Attached SCSI disk [ 17.396557] sdc: sdc1 sdc2 sdc3 [ 17.421077] sd 2:0:0:0: [sdc] Attached SCSI disk [ 17.445533] sdd: sdd1 sdd2 sdd3 [ 17.455554] sd 3:0:0:0: [sdd] Attached SCSI disk [ 17.473128] Freeing init memory: 3240K [ 19.452355] pfe_module_init [ 19.455215] pfe_platform_probe [ 19.459483] ipsec: baseaddr :9a000000 --- c0a00000 [ 19.465297] pfe_probe [ 19.467596] PFE Driver version: [ 19.467599] pfe_ctrl_12_00_2 [ 19.467601] built with pfe sources version: pfe_12_00_2 [ 19.478884] cbus_baseaddr: c3000000, ddr_baseaddr: c2000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000 [ 19.488490] pfe_hw_init [ 19.490941] CLASS version: 20 [ 19.493915] TMU version: 1011231 [ 19.497168] BMU1 version: 21 [ 19.500054] BMU2 version: 21 [ 19.502941] EMAC1 network cfg: 80000 [ 19.506524] EMAC2 network cfg: 80000 [ 19.510113] EMAC3 network cfg: 80000 [ 19.513696] EGPI1 version: 50 [ 19.516678] EGPI2 version: 50 [ 19.519652] EGPI3 version: 50 [ 19.522626] HGPI version: 50 [ 19.525513] GPT version: 0 [ 19.528229] HIF version: 10 [ 19.531027] HIF NOPCY version: 10 [ 19.534349] UTIL version: 20 [ 19.537241] bmu_init(1) done [ 19.540130] bmu_init(2) done [ 19.549643] class_init() done [ 19.552622] tmu_init: mem init [ 19.555683] tmu_init: lmem init [ 19.558881] tmu_init() done [ 19.561680] util_init() done [ 19.564569] gpi_init(1) done [ 19.567463] gpi_init(2) done [ 19.570352] gpi_init(3) done [ 19.573240] gpi_init(hif) done [ 19.576301] bmu_enable(1) done [ 19.579365] bmu_enable(2) done [ 19.582428] pfe_hif_lib_init [ 19.585514] pfe_hif_init [ 19.588061] pfe_hif_alloc_descr [ 19.591414] pfe_hif_init_buffers [ 19.594789] pfe_firmware_init [ 19.617507] pfe_load_elf [ 19.620070] pe_load_ddr_section: load address(3fb0000) and elf file address(c083b000) rcvd [ 19.652007] PFE binary version: pfe_12_00_2 [ 19.656208] pfe_firmware_init: class firmware loaded 0xb20 0xc3010000 [ 19.662675] pfe_load_elf [ 19.666565] pfe_firmware_init: tmu firmware loaded 0x220 [ 19.671901] pfe_load_elf [ 19.676337] pfe_firmware_init: util firmware loaded 0x16c0 [ 19.681878] pfe_ctrl_init [ 19.703970] pfe_ctrl_init finished [ 19.707404] pfe_eth_init [ 19.710897] pfe_ctrl_timer [ 19.725115] Comcerto MDIO Bus: probed [ 19.818523] eth0: pfe_eth_init_one: created interface, baseaddr: c3200000 [ 19.918807] eth1: pfe_eth_init_one: created interface, baseaddr: c3220000 [ 19.925638] pfe_vwd_init [ 19.928391] pfe_vwd_init: created vwd device(250, 0) [ 19.933371] pfe_vwd_driver_init: start [ 19.937158] pfe_vwd_up: start [ 19.940168] comcerto_wifi_rx_fastpath_register:33 VWD Tx function registered [ 19.947252] pfe_vwd_driver_init: end [ 19.950837] pfe_pcap_init [ 19.982159] MCU watchdog is reset! [ 20.452494] egiga0: pfe_eth_open [ 20.455955] hif_process_client_req: register client_id 0 [ 20.461299] pfe_hif_client_register [ 20.464803] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu [ 20.473108] egiga0: pfe_gemac_init [ 20.481271] egiga1: pfe_eth_open [ 20.484732] hif_process_client_req: register client_id 1 [ 20.490073] pfe_hif_client_register [ 20.493578] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu [ 20.501939] egiga1: pfe_gemac_init [ 21.526856] UBI: attaching mtd5 to ubi5 [ 22.255888] UBI: scanning is finished [ 22.271805] UBI: attached mtd5 (name "rootfs1", size 110 MiB) to ubi5 [ 22.278287] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 22.285095] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 22.291831] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 22.298734] UBI: good PEBs: 880, bad PEBs: 0, corrupted PEBs: 0 [ 22.304670] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 22.311832] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 823559108 [ 22.320824] UBI: available PEBs: 10, total reserved PEBs: 870, PEBs reserved for bad PEB handling: 40 [ 22.330086] UBI: background thread "ubi_bgt5d" started, PID 1007 [ 22.466864] PHY: comcerto-0:04 - Link is Up - 1000/Full [ 22.472133] pfe_eth_adjust_link: PHY: comcerto-0:04, phy->link: 1 [ 22.484145] UBIFS: mounted UBI device 5, volume 0, name "ubi_rootfs1" [ 22.490625] UBIFS: mounted read-only [ 22.494211] UBIFS: file system size: 103612416 bytes (101184 KiB, 98 MiB, 816 LEBs) [ 22.502071] UBIFS: journal size: 5206016 bytes (5084 KiB, 4 MiB, 41 LEBs) [ 22.506849] PHY: comcerto-0:06 - Link is Up - 1000/Full [ 22.506857] pfe_eth_adjust_link: PHY: comcerto-0:06, phy->link: 1 [ 22.520743] UBIFS: media format: w4/r0 (latest is w4/r0) [ 22.526591] UBIFS: default compressor: lzo [ 22.530708] UBIFS: reserved for root: 4893869 bytes (4779 KiB) [ 22.867909] md: md0 stopped. [ 22.874534] md: bind [ 22.877754] md: bind [ 22.883379] md: bind [ 22.886446] md: bind [ 22.893041] bio: create slab at 1 [ 22.897326] md/raid1:md0: active with 4 out of 4 mirrors [ 22.902735] md0: detected capacity change from 0 to 2045706240 [ 22.930817] md: md1 stopped. [ 22.944511] md: bind [ 22.951623] md: bind [ 22.955878] md: bind [ 22.959023] md: bind [ 22.965555] md/raid1:md1: active with 4 out of 4 mirrors [ 22.971004] md1: detected capacity change from 0 to 2046754816 [ 23.244604] md1: unknown partition table [ 23.325547] Adding 1998780k swap on /dev/md1. Priority:-1 extents:1 across:1998780k [ 23.360574] md0: unknown partition table [ 23.457859] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 27.197150] EXT4-fs (md0): re-mounted. Opts: (null) [ 27.220690] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 27.228804] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null) [ 27.356423] UBI: attaching mtd3 to ubi3 [ 27.426784] UBI: scanning is finished [ 27.446079] UBI: attached mtd3 (name "config", size 10 MiB) to ubi3 [ 27.452401] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 27.459216] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 27.465934] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 27.472832] UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0 [ 27.478685] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 27.485840] UBI: max/mean erase counter: 9/4, WL threshold: 4096, image sequence number: 3412924373 [ 27.494915] UBI: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 40 [ 27.504000] UBI: background thread "ubi_bgt3d" started, PID 1281 [ 27.691009] UBIFS: mounted UBI device 3, volume 0, name "ubi_config" [ 27.697402] UBIFS: file system size: 3428352 bytes (3348 KiB, 3 MiB, 27 LEBs) [ 27.704733] UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs) [ 27.711897] UBIFS: media format: w4/r0 (latest is w4/r0) [ 27.717755] UBIFS: default compressor: lzo [ 27.721863] UBIFS: reserved for root: 161928 bytes (158 KiB) [ 27.933992] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 27.952365] tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel. [ 27.961982] Disabling lock debugging due to kernel taint [ 27.975051] Tuxera NTFS driver 3014.4.29 [Flags: R/W MODULE]. [ 27.993806] PPP generic driver version 2.4.2 [ 28.021377] PPP MPPE Compression module registered [ 28.046463] PPP Deflate Compression module registered [ 28.056339] NET: Registered protocol family 24 [ 28.073547] PPP BSD Compression module registered [ 28.389426] elp_register_ocf: Comcerto 2000 ELP Crypto Offload Engine [ 28.395818] m86xxx_elp: Registering key des/3des aes md5 sha1 sha2_256 sha2_384 sha2_512 sha256_hmac null [ 34.485407] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 34.492627] bonding: MII link monitoring set to 100 ms [ 34.716809] bonding: bond0: setting mode to balance-xor (2). [ 34.737583] ADDRCONF(NETDEV_UP): bond0: link is not ready [ 34.743004] 8021q: adding VLAN 0 to HW filter on device bond0 [ 34.763408] egiga1: pfe_eth_close [ 34.796634] hif_lib_client_unregister : client: be6003a4, client_id: 1, txQ_depth: 2048, rxQ_depth: 256 [ 34.806057] hif_process_client_req: unregister client_id 1 [ 34.811564] pfe_hif_client_unregister [ 34.819303] egiga1: pfe_eth_open [ 34.822742] hif_process_client_req: register client_id 1 [ 34.828084] pfe_hif_client_register [ 34.831592] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu [ 34.839889] egiga1: pfe_gemac_init [ 34.844424] bonding: bond0: enslaving egiga1 as an active interface with an up link. [ 34.853117] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 34.873761] egiga0: pfe_eth_close [ 34.906624] hif_lib_client_unregister : client: be5003a4, client_id: 0, txQ_depth: 2048, rxQ_depth: 256 [ 34.916046] hif_process_client_req: unregister client_id 0 [ 34.921551] pfe_hif_client_unregister [ 34.928334] egiga0: pfe_eth_open [ 34.931772] hif_process_client_req: register client_id 0 [ 34.937114] pfe_hif_client_register [ 34.940618] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu [ 34.948917] egiga0: pfe_gemac_init [ 34.953440] bonding: bond0: enslaving egiga0 as an active interface with an up link. [ 36.836861] PHY: comcerto-0:06 - Link is Up - 1000/Full [ 36.842134] pfe_eth_adjust_link: PHY: comcerto-0:06, phy->link: 1 [ 36.946853] PHY: comcerto-0:04 - Link is Up - 1000/Full [ 36.952118] pfe_eth_adjust_link: PHY: comcerto-0:04, phy->link: 1 [ 52.350229] md: md2 stopped. [ 52.408759] md: bind [ 52.411794] md: bind [ 52.414817] md: bind [ 52.417874] md: bind [ 52.424643] md/raid:md2: device sda3 operational as raid disk 0 [ 52.430606] md/raid:md2: device sdd3 operational as raid disk 3 [ 52.436550] md/raid:md2: device sdc3 operational as raid disk 2 [ 52.442507] md/raid:md2: device sdb3 operational as raid disk 1 [ 52.449491] md/raid:md2: allocated 4220kB [ 52.453595] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 52.461112] RAID conf printout: [ 52.461118] --- level:5 rd:4 wd:4 [ 52.461125] disk 0, o:1, dev:sda3 [ 52.461131] disk 1, o:1, dev:sdb3 [ 52.461136] disk 2, o:1, dev:sdc3 [ 52.461142] disk 3, o:1, dev:sdd3 [ 52.461254] md2: detected capacity change from 0 to 8989087039488 [ 52.701336] md2: unknown partition table [ 53.851587] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: usrquota,data=ordered,barrier=1 [ 121.866939] bz time = 1 [ 121.869399] bz status = 1 [ 121.872024] bz_timer_status = 0 [ 121.875171] start buzzer [16402.268106] [16402.268109] ****** disk(0:0:0:0) spin down at 1610227 ****** [16403.478526] [16403.478528] ****** disk(1:0:0:0) spin down at 1610348 ****** [16404.024356] [16404.024359] ****** disk(3:0:0:0) spin down at 1610402 ****** [16985.211698] [16985.211701] ****** disk(3:0:0:0 0)(HD4) awaked by loop0 (cmd: 28) ****** [16992.021513] [16992.021515] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [16998.488148] [16998.488151] ****** disk(1:0:0:0 0)(HD2) awaked by loop0 (cmd: 28) ****** [18444.557232] [18444.557235] ****** disk(0:0:0:0) spin down at 1814456 ****** [18445.083580] [18445.083583] ****** disk(1:0:0:0) spin down at 1814508 ****** [18445.627730] [18445.627733] ****** disk(2:0:0:0) spin down at 1814563 ****** [18446.153281] [18446.153284] ****** disk(3:0:0:0) spin down at 1814615 ****** [28552.187933] [28552.187936] ****** disk(3:0:0:0 0)(HD4) awaked by transmission-da (cmd: 28) ****** [28555.196639] [28555.196642] ****** disk(2:0:0:0 0)(HD3) awaked by kworker/0:0 (cmd: 28) ****** [29846.771994] [29846.771997] ****** disk(2:0:0:0) spin down at 2954677 ****** [29847.303930] [29847.303933] ****** disk(3:0:0:0) spin down at 2954730 ****** [36191.292714] [36191.292717] ****** disk(1:0:0:0 0)(HD2) awaked by loop0 (cmd: 28) ****** [37407.881611] [37407.881614] ****** disk(1:0:0:0) spin down at 3710788 ****** [42918.591174] [42918.591177] ****** disk(1:0:0:0 0)(HD2) awaked by loop0 (cmd: 28) ****** [42925.169420] [42925.169423] ****** disk(2:0:0:0 0)(HD3) awaked by loop0 (cmd: 28) ****** [43401.856660] [43401.856663] ****** disk(3:0:0:0 0)(HD4) awaked by loop0 (cmd: 28) ****** [43410.075859] [43410.075862] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [44728.468119] [44728.468121] ****** disk(0:0:0:0) spin down at 4442847 ****** [44728.987711] [44728.987714] ****** disk(1:0:0:0) spin down at 4442899 ****** [44729.513041] [44729.513044] ****** disk(2:0:0:0) spin down at 4442951 ****** [44730.046804] [44730.046807] ****** disk(3:0:0:0) spin down at 4443005 ****** [61331.957672] [61331.957675] ****** disk(2:0:0:0 0)(HD3) awaked by loop0 (cmd: 28) ****** [61338.611761] [61338.611763] ****** disk(3:0:0:0 0)(HD4) awaked by loop0 (cmd: 28) ****** [61345.367803] [61345.367806] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [61348.616628] [61348.616631] ****** disk(1:0:0:0 0)(HD2) awaked by kworker/1:1 (cmd: 28) ****** [76050.792977] [76050.792980] ****** disk(0:0:0:0) spin down at 7575079 ****** [76051.311476] [76051.311478] ****** disk(1:0:0:0) spin down at 7575131 ****** [76051.840768] [76051.840771] ****** disk(2:0:0:0) spin down at 7575184 ****** [76052.395491] [76052.395494] ****** disk(3:0:0:0) spin down at 7575239 ****** [78202.096436] [78202.096438] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [78208.694223] [78208.694226] ****** disk(3:0:0:0 0)(HD4) awaked by loop0 (cmd: 28) ****** [78212.096646] [78212.096648] ****** disk(2:0:0:0 0)(HD3) awaked by kworker/1:0 (cmd: 28) ****** [78218.696632] [78218.696635] ****** disk(1:0:0:0 0)(HD2) awaked by kworker/1:2 (cmd: 28) ****** [79412.955209] [79412.955211] ****** disk(0:0:0:0) spin down at 7911295 ****** [79533.497832] [79533.497835] ****** disk(1:0:0:0) spin down at 7923350 ****** [79534.031236] [79534.031238] ****** disk(2:0:0:0) spin down at 7923403 ****** [79534.555848] [79534.555851] ****** disk(3:0:0:0) spin down at 7923455 ****** [82535.470886] [82535.470889] ****** disk(2:0:0:0 0)(HD3) awaked by loop0 (cmd: 28) ****** [82542.126782] [82542.126786] ****** disk(3:0:0:0 0)(HD4) awaked by loop0 (cmd: 28) ****** [83601.510189] [83601.510194] ****** disk(1:0:0:0 0)(HD2) awaked by wc (cmd: 28) ****** [83607.998918] [83607.998921] ****** disk(0:0:0:0 0)(HD1) awaked by wc (cmd: 28) ****** [84815.112752] [84815.112755] ****** disk(0:0:0:0) spin down at 8451511 ****** [84815.639205] [84815.639208] ****** disk(1:0:0:0) spin down at 8451564 ****** [84816.174505] [84816.174508] ****** disk(2:0:0:0) spin down at 8451617 ****** [84816.699983] [84816.699986] ****** disk(3:0:0:0) spin down at 8451670 ****** [86601.691053] [86601.691056] ****** disk(3:0:0:0 0)(HD4) awaked by loop0 (cmd: 28) ****** [86609.482985] [86609.482987] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [86616.358408] [86616.358411] ****** disk(1:0:0:0 0)(HD2) awaked by loop0 (cmd: 28) ****** [86619.496635] [86619.496638] ****** disk(2:0:0:0 0)(HD3) awaked by kworker/1:1 (cmd: 28) ****** [87937.247203] [87937.247206] ****** disk(0:0:0:0) spin down at 8763725 ****** [87937.787055] [87937.787058] ****** disk(1:0:0:0) spin down at 8763779 ****** [87938.309264] [87938.309266] ****** disk(2:0:0:0) spin down at 8763831 ****** [87938.851925] [87938.851928] ****** disk(3:0:0:0) spin down at 8763885 ****** [95868.396114] [95868.396117] ****** disk(2:0:0:0 0)(HD3) awaked by loop0 (cmd: 28) ****** [97179.447616] [97179.447619] ****** disk(2:0:0:0) spin down at 9687945 ****** [119793.459096] [119793.459099] ****** disk(2:0:0:0 0)(HD3) awaked by loop0 (cmd: 28) ****** [121060.141614] [121060.141617] ****** disk(2:0:0:0) spin down at 12076014 ****** [129803.145011] [129803.145016] ****** disk(3:0:0:0 0)(HD4) awaked by echo (cmd: 28) ****** [129809.904478] [129809.904481] ****** disk(0:0:0:0 0)(HD1) awaked by md2_raid5 (cmd: 35) ****** [129813.146639] [129813.146642] ****** disk(2:0:0:0 0)(HD3) awaked by kworker/0:4 (cmd: 35) ****** [129819.916634] [129819.916637] ****** disk(1:0:0:0 0)(HD2) awaked by kworker/0:0 (cmd: 35) ****** [131140.737219] [131140.737221] ****** disk(0:0:0:0) spin down at 13084074 ****** [131141.264323] [131141.264326] ****** disk(1:0:0:0) spin down at 13084126 ****** [131141.805889] [131141.805892] ****** disk(2:0:0:0) spin down at 13084180 ****** [131142.340184] [131142.340187] ****** disk(3:0:0:0) spin down at 13084234 ****** [161450.182202] [161450.182205] ****** disk(0:0:0:0 0)(HD1) awaked by zyxel_xmpp_clie (cmd: 28) ****** [161453.186631] [161453.186634] ****** disk(3:0:0:0 0)(HD4) awaked by kworker/0:2 (cmd: 28) ****** [161460.196631] [161460.196634] ****** disk(1:0:0:0 0)(HD2) awaked by kworker/0:1 (cmd: 28) ****** [161463.196637] [161463.196640] ****** disk(2:0:0:0 0)(HD3) awaked by kworker/1:0 (cmd: 28) ****** [162823.111866] [162823.111869] ****** disk(0:0:0:0) spin down at 16252311 ****** [162823.640443] [162823.640446] ****** disk(1:0:0:0) spin down at 16252364 ****** [162824.179128] [162824.179131] ****** disk(2:0:0:0) spin down at 16252418 ****** [162824.705598] [162824.705601] ****** disk(3:0:0:0) spin down at 16252470 ****** [173009.016751] [173009.016754] ****** disk(0:0:0:0 0)(HD1) awaked by md2_raid5 (cmd: 35) ****** [173012.016640] [173012.016642] ****** disk(3:0:0:0 0)(HD4) awaked by kworker/0:5 (cmd: 35) ****** [173019.026631] [173019.026634] ****** disk(2:0:0:0 0)(HD3) awaked by kworker/0:2 (cmd: 35) ****** [173022.026629] [173022.026632] ****** disk(1:0:0:0 0)(HD2) awaked by kworker/0:0 (cmd: 35) ****** [174345.326899] [174345.326902] ****** disk(0:0:0:0) spin down at 17404533 ****** [174345.862403] [174345.862405] ****** disk(1:0:0:0) spin down at 17404586 ****** [174346.383017] [174346.383019] ****** disk(2:0:0:0) spin down at 17404638 ****** [174346.924734] [174346.924738] ****** disk(3:0:0:0) spin down at 17404692 ****** [177980.573978] [177980.573981] ****** disk(3:0:0:0 0)(HD4) awaked by smbd (cmd: 28) ****** [177987.317192] [177987.317195] ****** disk(2:0:0:0 0)(HD3) awaked by smbd (cmd: 28) ****** [177993.989148] [177993.989151] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [178219.450028] [178219.450031] ****** disk(1:0:0:0 0)(HD2) awaked by loop0 (cmd: 28) ****** [181307.496960] [181307.496962] ****** disk(0:0:0:0) spin down at 18100750 ****** [181308.755708] [181308.755711] ****** disk(2:0:0:0) spin down at 18100875 ****** [181309.295894] [181309.295897] ****** disk(3:0:0:0) spin down at 18100929 ****** [182509.826427] [182509.826429] ****** disk(1:0:0:0) spin down at 18220982 ****** [186201.941507] [186201.941510] ****** disk(1:0:0:0 0)(HD2) awaked by loop0 (cmd: 28) ****** [187366.146789] [187366.146791] ****** disk(2:0:0:0 0)(HD3) awaked by loop0 (cmd: 28) ****** [187369.146638] [187369.146641] ****** disk(3:0:0:0 0)(HD4) awaked by kworker/1:3 (cmd: 28) ****** [187376.208007] [187376.208010] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [188630.389114] [188630.389117] ****** disk(0:0:0:0) spin down at 18833039 ****** [188630.909129] [188630.909132] ****** disk(1:0:0:0) spin down at 18833091 ****** [188631.429350] [188631.429352] ****** disk(2:0:0:0) spin down at 18833143 ****** [188631.955752] [188631.955755] ****** disk(3:0:0:0) spin down at 18833195 ****** [213532.266135] [213532.266138] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [214792.661435] [214792.661438] ****** disk(0:0:0:0) spin down at 21449266 ****** [216006.412160] [216006.412163] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [216012.871618] [216012.871622] ****** disk(2:0:0:0 0)(HD3) awaked by loop0 (cmd: 28) ****** [216016.426636] [216016.426639] ****** disk(1:0:0:0 0)(HD2) awaked by kworker/1:0 (cmd: 28) ****** [216209.976798] [216209.976801] ****** disk(3:0:0:0 0)(HD4) awaked by md2_raid5 (cmd: 35) ****** [217553.197923] [217553.197926] ****** disk(0:0:0:0) spin down at 21725320 ****** [217553.738749] [217553.738752] ****** disk(1:0:0:0) spin down at 21725374 ****** [217554.258310] [217554.258313] ****** disk(2:0:0:0) spin down at 21725426 ****** [217554.798630] [217554.798633] ****** disk(3:0:0:0) spin down at 21725480 ****** [233383.471859] [233383.471862] ****** disk(2:0:0:0 0)(HD3) awaked by loop0 (cmd: 28) ****** [233396.739327] [233396.739330] ****** disk(3:0:0:0 0)(HD4) awaked by loop0 (cmd: 28) ****** [233403.502386] [233403.502389] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [233410.241917] [233410.241920] ****** disk(1:0:0:0 0)(HD2) awaked by loop0 (cmd: 28) ****** [239155.473378] [239155.473380] ****** disk(0:0:0:0) spin down at 23885547 ****** [239156.710403] [239156.710405] ****** disk(1:0:0:0) spin down at 23885671 ****** [239157.246239] [239157.246241] ****** disk(2:0:0:0) spin down at 23885724 ****** [240357.793782] [240357.793785] ****** disk(3:0:0:0) spin down at 24005779 ****** [242899.014117] [242899.014120] ****** disk(3:0:0:0 0)(HD4) awaked by loop0 (cmd: 28) ****** [242905.810745] [242905.810748] ****** disk(0:0:0:0 0)(HD1) awaked by loop0 (cmd: 28) ****** [242912.246381] [242912.246383] ****** disk(1:0:0:0 0)(HD2) awaked by loop0 (cmd: 28) ****** [242915.826634] [242915.826637] ****** disk(2:0:0:0 0)(HD3) awaked by kworker/0:2 (cmd: 28) ******