-
NR5101 user guide figure 8 needs updating to show ANT1 and ANT2 connectors.
Hello, The ANT1 and ANT2 connectors of the NR5101 are not shown in figure 8 (rear panel) of the NR5101 user guide, when they are halfway down the back of the device, see photos at https://www.zyxel.com/uk/en/products_services/5G-NR-Indoor-Router-NR5101/photos Kind regards, Tony
-
Problems with the ZyXEL P-660R modem?
I just purchased the TekSavvy 10Mbps 400GB DSL plan and every time I upload a heavy download, I'd say 2GB or more, my website crashes after a few moments. I found it necessary to turn off the modem, turn it off for a while, then plug it back in and restart. camzap omegle Every time I have to reset the modem, I notice it…
-
VDSL2-ADSL Firmware Manual SNR Adjustment Feature Request
I am using the VMG3625-T50B VDSL2 modem and am quite satisfied with the product quality. However, the option to manually adjust VDSL2-ADSL SNR parameters, which is available in modems from Keenetic and Asus, is unfortunately not present in any of your firmware versions. This feature is very important for advanced users and…
-
Add 'Device Name' to DHCP Static IP list
I'm using an EX3301-T0 and when adding a device for Static DHCP you can pick it by name from a list of connected devices which is great. Once added though the Static DHCP list does not display device names, only the MAC and IP Addresses making it very difficult to tell devices apart without creating a crib sheet (see pic),…
-
NWA50AX support ASCII (Emoji) SSID
I just expanded my network and added an NWA50AX to my existing NWA210AX network. And unfortunately I had to discover, that NWA50AX does not support ASCII (Emoji) SSID's. I hope it can be added. Thanks
-
New firmware on 5.13 AAXA lineup for VMG1312-B10D with a new Linux kernel in it?
Hello,Could there be a new version of firmware for VMG1312-B10D 5.13 AAXA line-up with a newer Linux kernel in it please? 3.4.11 LTS expired in October 2016. 4.4 LTS has support until February 2022. 4.9 LTS has support until January 2023. 4.14 LTS has support until January 2024 , see…
-
Armor G5 separate activation 2.4 and 5 band
can you make separate on/off 2.4 and 5Ghz wifi? for example, I do not use 2.4 at all, and to reduce power consumption and heating, I would just turn off 2.4
-
Restore the ftp.zyxel.com information.
Hello, the ftp.zyxel.com site seems to have less information on it today. Maybe it is a fault. But it was helpful to have all the user guides there, so we could understand how to use the products fully. Kind regards, Tony
-
Ability to run pihole with MultyX and have a local DNS resolver that is different to the router.
Dear Zyxel, Many people seem to want to do this. Please can it be considered. This was also the subject of forum posts in 2020. https://community.zyxel.com/en/discussion/8495/problem-trying-to-run-pihole-with-zyxel-multy-x-wifi and…
-
Increase characters and special characters in the password
This topic is requested from the article:NAS326 How increase password characters We'll monitor how many users have this request.
-
2022 Zyxel stupidest mistakes they should fix in 2023
Port forward 80 says it
all your routers had no problem before and now do please fix it. I have seen people return your router because of this problem that was never a problem in the first place.
-
Add ip adress info for devices in Zyxel Air App.
In Zyxel Air App on iPhone . I can only see name and mac adress on devices , without any ip local ip adresses.Both on WiFi and Lan Port section. Would be good with a update for that ! /A
-
Multy M1 - The list of clients and associated stations
User @Helim proposed to add a function on Multy M1 that be able to check the list of clients showing the associated stations in the both Bridge/Standard mode. This idea is originated from the thread: https://community.zyxel.com/en/discussion/15898/where-is-the-device-list Nami
-
watchdog for Zyxel LTE5398-M904
Hi there, this modem experiences disconnections on random basis: the Internet is no longer available and shows the 4G connection is down (red cross on landing page of the router html server gui). The only fix for this seems to be to reboot the device, there are several tickets in your forums showing this is not an isolated…
-
Proposals / ideas for NR5101
Originally raised by @Eric11 on June 14 2023, and translated into English by @tonygibbs16 using Google Translate, as follows: Hello everybody, Here are my questions/proposals for this NR5101 router. An interface with the FR language A possibility of saving the connection on Chrome or Edge because you have to enter login…
-
One App to rule them all...
I have a NR7101 and three Multy M1s to put 5G wifi round my house. But why do I need 2 apps, that don't even look like they are from the same company? I cannot reboot the NR7101 unless I log off my Multy M1 wifi and long directly onto the NR7101's wifi. I can set the NR7101 to reboot every day, (which I have done) but I…
-
Please update the Zyxel Rover app to work on Android 13+
Hi Zyxel people, I hope that you are well. In the new year, please could you update the Zyxel Rover app. I had not been updated since May 2022 according to the Google Play Store. It also needs to be updated I think so that it works on Android 13 and later, such as run on Samsung phones. Merry Christmas and Happy New Year…
-
NAS
Schmutz von 2016 , bitte um neue innovationen im Bereich Cloud Speicherung, ansonsten kaufe ich keine Zyxel Produkte mehr, und mein Unternehmen ist Rand voll damit.
-
Configuration backup for Armor G1
This discussion was created from comments split from: Zyxel
Armor G5 - NBG7815 Description: Feature requests for Zyxel Armor G1. - No configuration backup is available for Armor G1 If you have any ideas please share your thought in this topic.
-
Link Aggregation function for Armor G5
This discussion was created from comments split from: Zyxel Armor G5 - NBG7815 Description: - Link Aggregation function for Armor G5 If you have any ideas please share your thought in this topic.
