Using a POE Injector with Nebula WAP
Hi- i want to use a POE injector with NWA1123-ACv2. But the WAP doesn't seem to power up when I use the injector. It works fine with the included power adapter, and the integrity of the CAT6 has been checked and is fine. I purchased a TP-Link Gigabit PoE. Model TL-POE150S. Do I need a specific one? Is there something I have to do via software to get the WAP power on when using the injector? I am stuck. Thank you
0
Accepted Solution
-
Hi @jheitz ,
The NWA1123-ACv2 only needs the 802.3af power supply to boot up. So, the PoE injector supported 802.3af should be able to boot up the AP. Please try to use the other injector or PoE switch to check if the AP can be booted up. Otherwise, if you have the other NWA1123-ACv2, you may check that if it can be booted up by using the same injector.
The Zyxel PoE injector is PoE12-HP which can support 802.3af/at power. Here's the link for your reference.
https://www.zyxel.com/products_services/802-3af-at-PoE-Injector-PoE12-HP/overview#benefits
Thanks.0
Zyxel Employee
Categories
- All Categories
- 164 Beta Program
- 1.7K Nebula
- 86 Nebula Ideas
- 62 Nebula Status and Incidents
- 4.7K Security
- 236 Security Ideas
- 1.1K Switch
- 50 Switch Ideas
- 907 WirelessLAN
- 27 WLAN Ideas
- 5.3K Consumer Product
- 172 Service & License
- 294 News and Release
- 65 Security Advisories
- 14 Education Center
- 911 FAQ
- 399 Nebula FAQ
- 249 Security FAQ
- 90 Switch FAQ
- 100 WirelessLAN FAQ
- 18 Consumer Product FAQ
- 55 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 68 About Community
- 51 Security Highlight
