2,4 gHz

elcapito
elcapito Posts: 12  Freshman Member
edited December 2017 in Multy WiFi System
My webcam requires 2,4 gHz connection! How can i force my iPhone X to use the lower frequency to setup the cam? This my first day with the Multy X!

#MultyX_December

Accepted Solution

  • Hanamichi
    Hanamichi Posts: 125  Ally Member
    Answer ✓
    May I know the model name of your webcam?
    And do you use "Single WiFi Name" for 2.4GHz & 5GHz network in Multy X?
    If yes, your iPhone X cannot force to use the specific frequency (2.4GHz or 5GHz).

    To my knowledge, if your webcam only support 2.4GHz, it still can be configure.
    Whatever your iPhone X is connected to 2.4GHz/5GHz in Multy X, because 2.4GHz/5GHz are the same network.

All Replies

  • Hanamichi
    Hanamichi Posts: 125  Ally Member
    Answer ✓
    May I know the model name of your webcam?
    And do you use "Single WiFi Name" for 2.4GHz & 5GHz network in Multy X?
    If yes, your iPhone X cannot force to use the specific frequency (2.4GHz or 5GHz).

    To my knowledge, if your webcam only support 2.4GHz, it still can be configure.
    Whatever your iPhone X is connected to 2.4GHz/5GHz in Multy X, because 2.4GHz/5GHz are the same network.
  • elcapito
    elcapito Posts: 12  Freshman Member
    Thanks! "Single Wifi Name" was the solution here. After using the app for this modification, where I disabled "Single Wifi Name" a 2.4 GHz network was selectable for my iPhone and my "chinese webcam" installed perfectly! Appreciated, Hanamichi! Thanks again!

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）