NAS326 RAID
NAS326
Posts: 6 
Freshman Member
Freshman Member
Hi all,
I have a question related to RAID 1 on my NAS326.
I had initially one HDD and after 3 months of usage I have added the second one. I've sync them on RAID 1 but in Overview, Volume on RAID is see "No Volume".
But in HDD section i see both hard drives and says "Disc Group 1 (raid 1).
See the below image.
My question is, do I have the HDD in RAID 1 or not? Why does it says No Volume on RAID?
#NAS_Aug_2019
I have a question related to RAID 1 on my NAS326.
I had initially one HDD and after 3 months of usage I have added the second one. I've sync them on RAID 1 but in Overview, Volume on RAID is see "No Volume".
But in HDD section i see both hard drives and says "Disc Group 1 (raid 1).
See the below image.
My question is, do I have the HDD in RAID 1 or not? Why does it says No Volume on RAID?
#NAS_Aug_2019
0
Accepted Solution
-
It is normal, because you're used disk group to create the volume.
So, you need go to Disk Group to check its RAID Type.
Also, you can see it on Hard Disk.
Here is the description of user's guide about internal storage.
https://www.zyxel.com/support/download_landing/product/nas326_22.shtml?c=gb&l=en&pid=20150327120001&tab=User_s_Guide&pname=NAS326
0
Ally MemberAll Replies
-
Thank you!0
Categories
- All Categories
- 164 Beta Program
- 1.7K Nebula
- 86 Nebula Ideas
- 62 Nebula Status and Incidents
- 4.7K Security
- 236 Security Ideas
- 1.1K Switch
- 50 Switch Ideas
- 908 WirelessLAN
- 27 WLAN Ideas
- 5.3K Consumer Product
- 172 Service & License
- 294 News and Release
- 65 Security Advisories
- 14 Education Center
- 911 FAQ
- 399 Nebula FAQ
- 249 Security FAQ
- 90 Switch FAQ
- 100 WirelessLAN FAQ
- 18 Consumer Product FAQ
- 55 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 68 About Community
- 51 Security Highlight
Consumer Product Help Center
FAQ