Last Firmware upgrade available

diego_cianet
diego_cianet Posts: 2
edited August 2022 in Switch
Hello. I know it is an old device, but still works and I plan to build a small network with it. Where can I find the last firmware upgrade available for the switch model MES-3528?

Here is the output of the "MES-3528# show system-information"

Product Model           : MES-3528
System Name             : MES-3528
System Contact          :
System Location         :
System up Time          :     0:02:28 (3ab7 ticks)
Ethernet Address        : cc:5d:4e:3c:XX:XX
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Bootbase Version        : V1.05 | 02/19/2009
ZyNOS F/W Version       : V3.90(BHR.5)20130312 | 03/12/2013
RomRasSize              : 2404122

Accepted Solution

All Replies

  • PeterUK
    PeterUK Posts: 3,503  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited April 2021 Answer ✓
    ftp://ftp2.zyxel.com/MES-3528/firmware/
  • diego_cianet
    diego_cianet Posts: 2
    Thank you for your fast response. Do you recommend upgrade with both files, BHR.4 and then BHR.5?
    Or should I upgrade only with the last one (BHR.5) ? Thanks again
  • PeterUK
    PeterUK Posts: 3,503  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary
    I would think the BHR.5
  • ispindel
    ispindel Posts: 1
    Despite clicking the link and putting my username in, I can't seem to connect to the FTP. Can I just double check, im running V3.90(BHR.5) | 06/10/2011 on my MES-3528. Is this the latest version according to the FTP files?
  • mMontana
    mMontana Posts: 1,399  Guru Member
    50 Answers 1000 Comments Friend Collector Fifth Anniversary
    I used third party App as FTP client (not anymore included into some browser) and i found files... Without username/passoword

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）