[NEBULA] Different DNS Servers per SSID

Remy · May 2018

Hi,

Can I specify different DNS Servers per SSID? So internal for employees and external for guests? We are also using the nebula gateway and switch

Thanks,
Remy

Zyxel_Dean · May 2018

Hi @Remy ,

You can assign different VLAN interface for the 2 SSID, then on the gateway you just have to setup different DNS to feed DHCP clients.

For example ,
Assuming you want to set Employee on VLAN10 , Guest on VLAN20 .

Then on the gateway you should create VLAN10 and VLAN20 interface, enable the interface DHCP server , this is where you can assign different DNS servers for connected clients.

Image: https://us.v-cdn.net/6029482/uploads/editor/wx/ebmh8aa4hq0l.png

As soon as VLAN interface is configured, configure the SSID VLAN to the designated VLAN under AP > SSID page.

Image: https://us.v-cdn.net/6029482/uploads/editor/g7/5tgth4vcyibc.png

Then should the connected clients get the DNS accordingly .

-Dean

Remy · May 2018

Thanks a lot! What does this mean for the LAN1 group? There you cannot specify a VLAN.

Regards,
Remy

Zyxel_Dean · May 2018

Hi @Remy

You have to click "Add" button on the interface panel to add VLAN.

the Port Group of LAN1 and 2 are fixed, for additional VLAN interfaces you add, you can then choose the port group it belongs. Basically it is just telling which subnet interface are accessible on which ports of the gateway.

-Dean

[NEBULA] Different DNS Servers per SSID

Comments

Categories

Nebula Tips & Tricks

Nebula Help Center