Zyxel VPN50 do now showing 1000MB/FULL

vkv · August 2021

Hi!

model Zyxel VPN50

Router> show port status

Port Status TxPkts RxPkts Colli. TxB/s RxB/s Up Time

===============================================================================

1 Down 0 0 0 0 0 00:00:00

2 1000M/Full 3737264 8078234 0 10071 33471 00:52:17

3 1000M/Full 2433367 1336667 0 382 719 00:52:17

4 Down 477763 198993 0 0 0 00:00:00

5 1000M/Full 1516961 765206 0 33226 10769 00:52:17

6 Down 3607842 1526174 0 0 0 00:00:00

Router>

provider provides 500 Mbps

speed test showing

kv@dsm-ubuntu:~$ speedtest

Speedtest by Ookla

Server: Telecom Center - Moscow (id = 17091)

ISP: Zao complat-telecom

Latency: 0.74 ms (0.30 ms jitter)

Download: 417.82 Mbps (data used: 520.8 MB)

Upload: 310.09 Mbps (data used: 139.3 MB)

Packet Loss: Not available.

kv@dsm-ubuntu:~$

BUT
direct connect to PC (without Zyxel) show more than 500+ Mbps

Question
Why Zyxel do not showing 500Mbps speed

Ths

gb5102 · August 2021

A couple of suggestions:

-BWM can add some overhead, you can likely increase performance by disabling BWM if you are not using it.

-Content filter can also decrease performance, try to disable(if enabled) and see if there is any improvement.

PeterUK · August 2021

The SPI firewall throughput of the VPN50 at 800Mbs does not mean TCP and so if you want to go faster you need bigger model.

vkv · February 2022

Which model do you recomend ?

PeterUK · February 2022

The VPN300 will do 1Gb TCP

All Replies