BGP Failing with "error code 6 subcode 5 (Connection rejected)"
Options
Morning all.
Ive just installing a Zywall 310 (Firmware Version:V4.71(AAAB.0) / 2022-02-22 20:44:02)
I have a interface connected to a network where there are two BGP neighbors. I have ping connectivity to them both.
Diags >
Router# show bgp summary
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
===============================================================================
172.xxx 65001 10 5 0 0 0 never Idle
172.xxx 65001 12 6 0 0 0 never Idle
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
===============================================================================
172.xxx 65001 10 5 0 0 0 never Idle
172.xxx 65001 12 6 0 0 0 never Idle
Ive tried changing few things on the 310 but still the same.
Doing a packet capture i see im getting this from both neighbors >>
Border Gateway Protocol - OPEN Message
Type: NOTIFICATION Message (3)
Major error Code: Cease (6)
Minor error Code (Cease): Connection Rejected (5)
Searching the web i only find this > https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClhtCAC
Any pointers / Suggestions please?
Thanks in advance
0
All Replies
-
thanks- but issue was LAN side of the router. Networks folks fixed overnight
0
Categories
- All Categories
- 393 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 51 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 906 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 880 Nebula FAQ
- 415 Security FAQ
- 221 Switch FAQ
- 195 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 63 Security Highlight