AP & mac address filtering ??

ITGS · May 2022

I installed 3 new NWA50AX in a new site and all work fine.
I would limit access on a specific SSID , based on device mac address but I don't undersand how can I do ??
Thank you for support

Zyxel_Jay · May 2022

Hi @ITGS

Welcome Zyxel Community

Here is a FAQ for your reference.

[NEBULA] How to configure MAC-based authentication to enhance Wi-Fi security?

Please note that when you are setting the SSID Advanced Settings, select the SSID you need for mac auth.

You also use this FAQ

[NEBULA] How to add policy rules for clients?

Select "to specific SSID" and manage your device allow or block.

Any problem can talk to us.

Thank you, have a good day.

Zyxel_Jay

ITGS · May 2022

Thank you for reply.
Unfortunately I can't enable mac authentication. Option is grayed out.
I think that NWA50AX don't support this feature...
If this is the reason, I'm very surprise because it's a standard feature and is very limiting.
If I knew this, I did not buy this AP

PeterUK · May 2022

in Standalone you should have mac address filtering for that model not sure why you can't in NEBULA

Zyxel_Jay · May 2022

@ITGS @PeterUK

Thanks for your reply. Sorry for not noticing this.NWA50AX isn't supported MAC Authentication.

You can find this information with the path.HELP>DEVICE FUNCTION TABLE>SB Access Point

Nebula has the same mechanism as Mac address filtering, which you can set up using the second hyperlink from the previous article.

“You also use this FAQ

[NEBULA] How to add policy rules for clients?

Select "to specific SSID" and manage your device allow or block. “

If you have any question,please reply me.
thank you

Zyxel_Jay

AP & mac address filtering ??

Accepted Solution

All Replies

Categories

Nebula Tips & Tricks

Nebula Help Center