ATP100W wpa ssid not working
All Replies
-
yes it is allowed and cable (RJ45) computer works well.
0 -
I assume this is the other SSID; and confirm that it works with this client?
0 -
Yes EFFERV_INVITE is OPEN and is outgoing on DMZ whit an ip of 10.10.10.0/255.255.255.0
And EFFERV_PRO is WPA2_Personnal wifi outgoing on LAN1 with an ip of 192.168.10.0/255.255.255.00 -
I presume you have already done this obvious test; anyway what if you change wpa 2 in open? (to create the same conditions of the other ssid)0
-
you are right I have try.Anyway this PRO wifi works only if I set the outgoing interface to other than LAN1.But my requirement is the LAN1 no other one.I really don’t understand why on this device only it is not working.I have installed 6 others atp100w and wifi works as expected.Thanks for your time0
-
as far i can see your configuration is quite basic.
Obviously we missing something. In my opinion it could be better backup the configuration, full reset and start from scratch.
0
Freshman Member
Ally Member
Categories
- All Categories
- 415 Beta Program
- 2.4K Nebula
- 144 Nebula Ideas
- 94 Nebula Status and Incidents
- 5.6K Security
- 238 USG FLEX H Series
- 267 Security Ideas
- 1.4K Switch
- 71 Switch Ideas
- 1.1K Wireless
- 40 Wireless Ideas
- 6.3K Consumer Product
- 247 Service & License
- 384 News and Release
- 83 Security Advisories
- 29 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.2K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 83 About Community
- 71 Security Highlight
