NAS326 new firmware V5.21 (AAZF.11)C0 - UPnP
geert
Posts: 2
Freshman Member
Freshman Member
Since I have installed the new firmware V5.21 (AAZF.11)C0 the NAS326 is unable to find any UPnP supported routers. (router UpnP is active). I know that it is possible via port mapping (router) but sometimes I need myzyxelcloud to update UPnP on a remote nas/router. Any idea?
0
Accepted Solution
-
Hi,
The new firmware on the release note do not mention there is behavior changing on the NAS itself
https://www.zyxel.com/support/download_landing/product/nas326_14.shtml?c=gb&l=en&pid=20150327120001&tab=Firmware&pname=NAS326#
I'm using NBG6615 as router above the NA326, it is still available to find the UPNP router.
Maybe try to reboot the router,NAS and check it again?0
Ally MemberAll Replies
-
Thx ikubuf,after rebooting the router and disable the switch setting "Unknown Multicast Drop" UPnP is working again!
0 -
You are right. Got the same results.geert said:Thx ikubuf,after rebooting the router and disable the switch setting "Unknown Multicast Drop" UPnP is working again!
0
Categories
- All Categories
- 164 Beta Program
- 1.7K Nebula
- 86 Nebula Ideas
- 62 Nebula Status and Incidents
- 4.7K Security
- 236 Security Ideas
- 1.1K Switch
- 50 Switch Ideas
- 908 WirelessLAN
- 27 WLAN Ideas
- 5.3K Consumer Product
- 172 Service & License
- 294 News and Release
- 65 Security Advisories
- 14 Education Center
- 911 FAQ
- 399 Nebula FAQ
- 249 Security FAQ
- 90 Switch FAQ
- 100 WirelessLAN FAQ
- 18 Consumer Product FAQ
- 55 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 68 About Community
- 51 Security Highlight
Consumer Product Help Center
FAQ