USG40 WLAN port Offline

Good morning, I have a USG40 unit and for two days I have had a problem with it, sporadically the WLAN interface goes offline, the only solution I have found is to reset it. Reviewing the log I find these reports but I don't know what I should do, can someone help me with the solution? Thank you. I copy part of the log

113

2022-10-31 11:12:17

info

Built-in Service

Enable daylight saving.

 

 

Built-in Service

114

2022-10-31 11:12:15

info

CAPWAP

WLAN Controller mode changed. Registration Type:Manual

 

 

 

115

2022-10-31 11:12:15

notice

WLAN Rogue AP Detection

rogue ap detection is enabled.

 

 

RAPD

116

2022-10-31 11:12:06

error

myZyXEL.com

Connection error has occurred.

 

 

 

117

2022-10-31 11:11:55

info

Interface

Interface opt_ppp has been changed.

 

 

CONFIG CHANGE

118

2022-10-31 11:11:55

info

Interface

Interface wan1_ppp has been changed.

 

 

CONFIG CHANGE

119

2022-10-31 11:11:54

info

Interface

Interface dmz has been changed.

 

 

CONFIG CHANGE

120

2022-10-31 11:11:54

info

Interface

Interface lan2 has been changed.

 

 

CONFIG CHANGE

121

2022-10-31 11:11:53

info

Interface

Interface lan1 has been changed.

 

 

CONFIG CHANGE

122

2022-10-31 11:11:51

info

Interface

Interface wan1 has been changed.

 

 

CONFIG CHANGE

123

2022-10-31 11:11:51

alert

Policy Route

Trunk SYSTEM_DEFAULT_WAN_TRUNK dead, related policy route rules will be disabled.

 

 

TRUNK DEAD

124

2022-10-31 11:11:51

info

Policy Route

Interface opt_ppp alive, related policy route rules will be re-enabled.

 

 

INTERFACE ALIVE

125

2022-10-31 11:11:51

info

Policy Route

Trunk SYSTEM_DEFAULT_WAN_TRUNK alive, related policy route rules will be re-enabled.

 

 

TRUNK ALIVE

126

2022-10-31 11:11:51

info

Policy Route

Interface wan1_ppp alive, related policy route rules will be re-enabled.

 

 

INTERFACE ALIVE

127

2022-10-31 11:11:51

alert

File Manager

WARNING: #configure terminal account pppoe OPT_PPPoE_ACCOUNT exit, Please type user.

 

 

 

128

2022-10-31 11:11:51

alert

File Manager

WARNING: #configure terminal account pppoe WAN1_PPPoE_ACCOUNT exit, Please type user.

 

 

 

129

2022-10-31 11:11:51

info

Policy Route

Interface dmz alive, related policy route rules will be re-enabled.

 

 

INTERFACE ALIVE

130

2022-10-31 11:11:51

info

Policy Route

Interface dmz alive, related policy route rules will be re-enabled.

 

 

INTERFACE ALIVE

131

2022-10-31 11:11:51

info

Policy Route

Interface lan2 alive, related policy route rules will be re-enabled.

 

 

INTERFACE ALIVE

All Replies

  • mMontana
    mMontana Posts: 1,298  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer
    I had similar issue with a USG60 few years ago.
    • Shutdown (via GUI) the device.
    • Wait for the communication of ended shutdown.
    • Unplug power adapter from the power socket/wall/whatever, keep it unplugged for 4 minutes at least.
    • Plug it back.

    Start monitoring again.

  • Zyxel_Cooldia
    Zyxel_Cooldia Posts: 1,426  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Hi @ivargas,

    Welcome to Zyxel community.  :)
    Please help us to type CLI Router# show capwap ap all statistics when the issue happens again.
    We would like to check if it have TX power in wireless.

Security Highlight