XGS1930-52HP Switch port reset via cli

Tobihoby
Tobihoby Posts: 1
edited August 2022 in Switch
Hi,
how can i reset a poe port (for restart like a cam) via cli?

thanks
tobi

Accepted Solution

  • Zyxel_Melen
    Zyxel_Melen Posts: 2,882  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓
    Hi @Tobihoby

    Welcome to Zyxel community!
    Since the XGS1930-52HP is a smart managed switch, it does not support CLI command.
    You can use PWR cycle function to restart your PD(like CAM) via Web GUI.
    Please go to Status > Neighbor and click the cycle button of the PD connecting port which you want to restart.
    1. Click Neighbor

    2. Click the cycle button of the PD connecting port that you want to restart. I use port 2 as an example.


    Zyxel Melen


All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 2,882  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓
    Hi @Tobihoby

    Welcome to Zyxel community!
    Since the XGS1930-52HP is a smart managed switch, it does not support CLI command.
    You can use PWR cycle function to restart your PD(like CAM) via Web GUI.
    Please go to Status > Neighbor and click the cycle button of the PD connecting port which you want to restart.
    1. Click Neighbor

    2. Click the cycle button of the PD connecting port that you want to restart. I use port 2 as an example.


    Zyxel Melen


  • Kasey
    Kasey Posts: 3
    First Comment First Anniversary
    Prior to the Xs1930 every time I was uploading between 2.5Gbps and 1Gbps devices I was getting around 500 Mbps. Now with the XS1930 I can get the ful1 1Gbps or https://testmyspeed.onl/.

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）