GS1910-24 VLAN

Options
Onur
Onur Posts: 6 image  Freshman Member
First Comment
edited February 2023 in Switch
I have completed the configuration as vlan3 and vlan4 on sophos firewall. Although I pull to vlan3 or vlan4 on gs1910-24, devices connected to port1-2 cannot get IP.
What else do I need to do? thanks

All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 4,669 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    edited February 2023
    Hi @Onur,

    The port VLAN configuration of Sophos firewall connecting port is recommended as below:
    1. Port VLAN should be "1" if your management VLAN is 1.
    2.  Egress tagging should be "Untag port VLAN".
    3. Allowed VLAN should be "1,4"

    Also, the port VLAN configuration of end devices connecting ports are recommended as below:
    1. Port VLAN should be "4".
    2. Egress tagging should be "Untag port VLAN".
    3. Allowed VLAN should be "4"

    Hope it helps.
    Zyxel Melen


  • Onur
    Onur Posts: 6 image  Freshman Member
    First Comment

    The cable from the firewall is plugged into port 24. The computer with Windows is plugged into port 2. Management port is in vlan1.but windows computer is not getting IP

    vlan3.JPG
  • Onur
    Onur Posts: 6 image  Freshman Member
    First Comment

    problem is solved. The problem was caused by the dhcp distribution being turned on.

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）