Adding WPAD(Web-Proxy ) data.

SYK · March 2017

I want to add the WPAD(Web-proxy) when a client will be distributed network settings via DHCP.

Zyxel_Irene · November 2017

Hi @SYK

Creating a WPAD (code: 252) entry in DHCP option has been on NSG and NCC already.
You can go to Gateway > Configure > Interface addressing to edit LAN interface. In edited window, there is Extended options, and hit Add new button to create DHCP Option for WPAD entry.

Image: https://us.v-cdn.net/6029482/uploads/editor/db/u5m6soynkyjg.png

SNC · February 2018

Is this option available on the USG devices?

Zyxel_Irene · February 2018

Hi @SNC

Yes! Of course! You can follow the path below to set up on USG.

Log in USG local giu, and go to Configuration > Network > Interface > Ethernet tag
Double click USG LAN to edit.
Select the DHCP as DHCP Server, and click Show Advanced Settings on the top left.
Click Add in the Extended Options block to add DHCP Option.
Last, click OK to finish.

SNC · February 2018

hi @ Nebula_Irene

When I look at that location on USG40 or USG60 Devices under DHCP there is no Advance (Extended Options)

If I click Add by Static DHCP Table I can only add ip addresses. Is there another location I am missing?

Zyxel_Irene · February 2018

Hi @SNC

You miss to select DHCP to DHCP Server, then you will see DHCP Option there.

Image: https://us.v-cdn.net/6029482/uploads/editor/sc/uxotc3b7opc4.png

SNC · February 2018

You are incorrect even with dhcp server enabled there is no add dhcp option. The screen is identical to the screenshots I posted. We also have the latest firmware installed.

KUMAR · February 2018

SNC did you hit "show advanced setting" on the top left?

Image: https://us.v-cdn.net/6029482/uploads/editor/0e/d7l5zik524n4.png

mine is usg20vpn, Firmware Version:V4.25(ABAR.0) / 2017-04-21 07:54:38
not the lastest but it's there

SNC · February 2018

OMG, you are correct. I forgot to hit the show advanced settings.

Do you know if it's possible to add a url? We have ip phones and would like to add option 66 pointing to a url but did not see a url option in the drop down box.