sfp wan atp100

leonardo
leonardo Posts: 10  Freshman Member
First Comment Third Anniversary
edited July 2023 in Security

Can I configure port sfp octical whith module Gpon ?

for wan access?

the vlan is 835 for date

836 for voice and 3552 for multivideo

the ISP is tim with adsl FTTH

All Replies

  • leonardo
    leonardo Posts: 10  Freshman Member
    First Comment Third Anniversary

    the Vlan to configure to por sfp gpon - via WAN


    User Vlan Dati 835
    User Vlan Voce 837
    User Vlan Video 836
    Vlan Gpon Dati 100
    Vlan Gpon Voce 101
    Vlan Gpon Video Multicast 3585
    Tipo Segnale Ottico GPON

  • leonardo
    leonardo Posts: 10  Freshman Member
    First Comment Third Anniversary
    image.png

    Schema a blocchi di una rete GPON. Vengono utilizzate, nel complesso, tre diverse lunghezze d’onda: 1490 nm per la ricezione, 1310 nm per la trasmissione e 1550 nm per i servizi in overlay.

  • Zyxel_Jeff
    Zyxel_Jeff Posts: 1,230  Zyxel Employee
    100 Answers 500 Comments Friend Collector Fourth Anniversary

    Hi @leonardo

    Do you want to configure VLAN interfaces on the SFP port, right? If so, will the SFP port belong to WAN or LAN role? If you could share the topology with us and that would be better. Thanks.


    241015_Speak-up,-Win-WiFi-7_Community-CSO-signature_1920x200.jpg

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP! https://bit.ly/2024_Survey_Community

  • MJStar
    MJStar Posts: 36  Freshman Member
    First Answer First Comment Friend Collector Third Anniversary

    @leonardo

    Maybe you could refer to this similar discussion for the VLAN settings on the SFP port and you could configure VLAN tag on the WAN port of SFP interface as well.

  • leonardo
    leonardo Posts: 10  Freshman Member
    First Comment Third Anniversary

    I would like to use the SFP gpon module of the ATP100 to connect directly to the FTTH ADSL line....

  • leonardo
    leonardo Posts: 10  Freshman Member
    First Comment Third Anniversary
    image.png

    the atp100 will be ONT (optical network terminationi) at home

  • Zyxel_Jeff
    Zyxel_Jeff Posts: 1,230  Zyxel Employee
    100 Answers 500 Comments Friend Collector Fourth Anniversary

    Hi @leonardo

    If you configure VLAN ID on the SFP wan port and the outgoing traffic would be tagged the VLAN ID only, as below:

    SFP_VLAN77.png

    But if you want to prioritize voice, video, or other specific traffic, we suggest you could use the BWM feature. Thanks.


    241015_Speak-up,-Win-WiFi-7_Community-CSO-signature_1920x200.jpg

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP! https://bit.ly/2024_Survey_Community

  • leonardo
    leonardo Posts: 10  Freshman Member
    First Comment Third Anniversary

    thanks

    immagine.png 
    Using an external media converter to transform FO to electrical ETH works (port2).
By inserting the technicolor GPON (2.5Gbps/1.25Gbps-(FTTH SFP GPON Technicolor AFM0002TIM))
module into modulo SFP (port1) to the ATP100W It still don't go online.
    immagine.png
    immagine.png

  • Zyxel_Jeff
    Zyxel_Jeff Posts: 1,230  Zyxel Employee
    100 Answers 500 Comments Friend Collector Fourth Anniversary

    Hi @leonardo

    "By inserting the technicolor GPON (2.5Gbps/1.25Gbps-(FTTH SFP GPON Technicolor AFM0002TIM))module into modulo SFP (port1) to the ATP100W It still don't go online."

    Do you mean the SFP port of ATP100W is not working?

    Could you use the below CLI to check whether the SFP port is working or not?

    (1). show interface all ⇒ to check all interfaces' status

    (2). ping 8.8.8.8 interface sfp ⇒ to verify the SFP port can ping 8.8.8.8 normally or not

    Thanks.


    241015_Speak-up,-Win-WiFi-7_Community-CSO-signature_1920x200.jpg

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP! https://bit.ly/2024_Survey_Community

Categories

Security Highlight


Read more

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）