Isolated Guest WLAN - only Internet Traffic

Gernot · June 2017

NAT mode: Use own DHCP of Nebula
Clients receive IP addresses in an isolated 10.0.0.0/8 network. Clients cannot communicate with each other, but they may communicate with devices on the wired LAN if the SSID firewall settings permit.

martinihenry · July 2017

I think you can try with intra-bss blocking or L2 isolation to block between clients, see if that suits you? You can set the desired MAC to allow clients to reach, maybe that can do it.

Isolated Guest WLAN - only Internet Traffic

Comments

Categories

Nebula Tips & Tricks

Nebula Help Center