GS1900-8 trunking?

Stampeder
Stampeder Posts: 14  Freshman Member
First Comment Second Anniversary
edited August 2022 in Switch

I have a ubiquiti ap in my barn that is transporting valns 10 and 90. This connects to my GS1900-8 on port 8. Ports 1 through 4 I want to setup on VLAN 90 for my ip cameras and ports 5 thru 7 on VLAN 10. Can you show me how to configure my GS1900 that has software V2.40(AAHH.1)? I know I am missing something in the trunking portion.

Thanks.

Glenn.

Accepted Solution

All Replies

  • Zyxel_Derrick
    Zyxel_Derrick Posts: 126  Zyxel Employee
    5 Answers First Comment Friend Collector First Anniversary
    edited August 2019

    Hi @Stampeder


    Please follow the steps below:

    1. go to "Configuration > VLAN" to add VLAN 10 and VLAN 90

    2. go to "VLAN Port" and select VLAN ID 90 to configure port 1 to 4 untagged and port 8 tagged

    3. go to "VLAN Port" and select VLAN ID 10 to configure port 5 to 7 untagged and port 8 tagged

    4. go to "Port" configure PVID 90 for port 1 to 4 and PVID 10 for port 5 to 7

    Then you can achieve your setting


    Zyxel_Derrick

  • Stampeder
    Stampeder Posts: 14  Freshman Member
    First Comment Second Anniversary

    Just one more part to my question:

    Should port 8 be set to VLAN trunk enabled and also what about filtering?

    Thanks.

    Glenn.

  • Stampeder
    Stampeder Posts: 14  Freshman Member
    First Comment Second Anniversary

    Thanks very much for the explanations and help.

    Best regards.

    Glenn.

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）