Hikari

Hi enzettoFrom your screenshot, you have configured Firewall, remote management, and NAT port forwarding. There has more setting than you report at first :) I will find time to test in my side and update later on.

Hi andreyng Could you please provide an example of what specific setting lost? (I mean may not save in data model) cause the issue to happen. I will also try it on my site after your suggestion.

Hi miklelvMay I ask if the "High speed" you mentioned means every time while download speed is greater than 100 Mbps the internet disappeared? or it happened sometimes? The question asks about frequency. When the issue happened, will LTE5366 would reboot or device as still running but the internet dropped? The log httpd…

Hi enzettoI have checked your configuration picture, do you mean you want to perform WOL (Wake on LAN) from WAN side, may I ask where will be the magic packet send from? This question used to verify the problem occurs from WOL function or port forwarding function needs to be check.

Hi enzetto Would you please give me the full FW ID, and please provide a screenshot of how you configured on GUI. I want to test same configuration as you. Please advise, thank you.

Hi es04 I am sorry to inform you that we do not support ipsec tunnel build feature in this product. We only support VPN traffic pass through (PPTP/IPSec and L2TP)

Hi BarneyBoyI have discussed your case with my colleague, maybe you mean while in bridge mode, LTE4506 would not update ISP IP to LAN side client once LTE4506 has re-connected with the mobile network. Per check with our team, once there has WAN network change (for example, WAN IP changed) LTE 4506 will let LAN port down/up…

Hi Oiseau_4GLTE 3316-M604 currently does not support language French, but LTE4506-M606 does. Would you consider to change your product to LTE4506-M606? Paste LTE4506 GUI page in below for you to reference.

Hi Himmler For IMEI check, you can check IMEI info in Monitor > LTE Modem Status.Would you like to take a look at our user guide? You can find many function usage in the below document.https://www.zyxel.com/support/download_landing/product/wah7608_22.shtml?c=gb&l=en&pid=20170301200003&tab=User_s_Guide&pname=WAH7608

Hi BarneyBoyFirst of all, if you use LTE4506, the IP address is assigned from ISP directly, right? Why the ISP set lease time is 2 hours only?And, I am not sure what do you mean by "When the LTE4506 disconnects und re-connects", do you mean you reboot the LTE4506? Then your LAN side router could not receive the new IP. If…

Hi Sean123 I am sorry to inform you that LTE3302 does not support scheduling down then reboot function.

Hi ricudatales Please refer to below opendns configuration step. https://support.opendns.com/hc/en-us/articles/228006047 Go to GUI > broadband > modify your WAN interface as following:

Hi muetzekoeln May I ask which company is your service provider?If the device has selected a DFS channel, CPE will listen if there has a radar signal for 1 minute. In this one minute, CPE will not send out a beacon, mobile phone/laptop will not able to see SSID. - If there has no radar signal, the client can use this…

Hi Zeedo65 I am sorry to inform you that VMG3925-B10B does not support to be a VPN server. 

Hi nonchiedercilaparolaI did the following test, and issue does not happen. WOL works in my side 1. Set up an environment with a different router, make sure 2 different laptops can wake up by WOL function.2. Replace step 1 router to a VMG8825-B50B. These 2 different laptops can wake up by WOL function.I may need your help…