Comments
-
Did the ATP100 connect with modem by Ethernet to get performance 650-700Mb/s ?
-
As I know, you can go to system>www ,and check the default cert is used by Server Certificate field. The certificate also can be used on VPN profile for authentication, so you may check it as well.
-
I checked on my ATP200, and the URL did not hit URL Threat filter. If you add the URL in the white list does the issue still occur? My signature version 1.0.0.20201126.0.
-
I think it's the time to change the CradlePoint to USG :)
-
There is NO_PROPOSAL_CHOSEN on log message. It could be Phase 1 Algorithms mismatch. From my site is working with this scenario. Did you use quick setup to create VPN profile?
-
If you requested the steps to save log on USB, you can check this thread. https://businessforum.zyxel.com/discussion/4134/log-and-backup-to-usb
-
You should backup the configuration first, then rollback to 4.39. Next, downgrade to 4.38.
-
Do the PCs locate in local and remote policy of VPN? Do the internet and skype traffic go through the tunnel? or passing through via wan?
-
You should use other PC connect to VPN100 to see the consequence.
-
I think you should reference this thread https://businessforum.zyxel.com/discussion/2625/zywall110-error-number-16015-error-message-dial-a-dynamic-tunnel-has-failed-for-crypto-map/p1
-
You could download the mib file from official website first.Example for USG110, you can visit this Link to download the MIB file. I think zywall can be monitored or managed via SNMP, basically monitoring tool that supports understanding OID will work. Also, you should configure SNMP on device
-
Did you face this issue with default configuration? Disable firewall, the issue disappear? you may try to test with other phone see if face the same issue.
-
You can reference this thread https://businessforum.zyxel.com/discussion/4532/how-to-setup-l2tp-vpn Make sure IKE and AuthIP IPSec Keying module is enable on PC.
-
As I know, you need to create static route to let DNS session flow in tunnel.
-
You can try to use algorithm DES,MD5, DH1. As I know, the UTM service enabled will consume numerous performance.