Nebula_Adam  Zyxel Employee

Comments

• Hi @jcostlow
  
  Welcome to Zyxel Community.
  Sorry or the late responding due to tough resource recently.
  
  If you would like to use Zabbix, you may v…

  in SNMP Monitoring Comment by Nebula_Adam April 16
• @Lukasz ,

  
  

  Your current configuration should be following:

  Site-to-Site is established successfully.
  Device subnet:

  …

  in NSG VPN VLAN no connection Comment by Nebula_Adam April 9
• Hi @Lukasz ,
  
  According to your description, there are things we would like to verify:
  

  1. Do you select the "Use VPN" on LAN interface 200.1…

  in NSG VPN VLAN no connection Comment by Nebula_Adam April 8
• Hi @ivessm ,
  
  Thanks for your interested in Zyxel Nebula.
  
  Based on your description, you have 2 separated network in the same location,as you ment…

  in 1 Customer - 2 Physically Separate Networks - Same Location Comment by Nebula_Adam April 1
• Hi @aakp ,
  
  Welcome to Zyxel Community!
  
  In order to solve your issue, please use Nebula APP on your mobile phone to scan your QR code of your Nebula…

  in [NEBULA] I bought a AP which is already registered Comment by Nebula_Adam March 23
• Hi @TAPTech ,
  
  Kindly inform you that we actually have a feature call "my devices" which uses to list all your devices in your account. Please check the top right …

  in MSP Portal - List all device inventory Comment by Nebula_Adam March 18
• Hi @woodoo
  
  Since the switch is not online on Nebula Control Center, may you please help us to enable Zyxel support which is located at Help > Support reques…

  in Nebula+NSG100+GS1920-24 Comment by Nebula_Adam March 16
• @Vettalex ,
  
  May I confirm one thing :
  
  

  vlan1 data: 192.168.8.x   ← Is this typo?  I remember you used 192.168.1.x subnet on VLAN 1 

  vlan…

  in GS1900-8HP and GS1920-24HPv2 LACP problem Comment by Nebula_Adam March 10
• Hi @Carlsap
  
  Regarding your question, I will suggest the following two switches for you:
  
  

  1. in Do Zyxel have routing capabilities in the 10Gb switches? Comment by Nebula_Adam March 9
• Hi @Vettalex ,
  
  Do you use VLAN 1 IP address of switch to ping each other or other VLANs IP addresses?
  If you use VLAN 1 IP to ping switches, it should not h…

  in GS1900-8HP and GS1920-24HPv2 LACP problem Comment by Nebula_Adam March 9
• Hi @Phil_G ,
  
  Here is a post that forum users discussed about SFP+/RJ45 transceiver for your reference.
  in GBIC compatibility with XGS series switches Comment by Nebula_Adam March 8
• Hi @brysmar
  
  Welcome to Zyxel Community.
  
  According to your description, here are questions that we would like to ask:
  

  1. What firmware versio…

  in VLAN set up issue on GS1920 Comment by Nebula_Adam March 4
• @businessuer
  
  Send is egress and receive is ingress? 
  Yes, exactly. 
  
  Is there anything unclear so far?

  in What is the difference between PVID , untagged and tagged Comment by Nebula_Adam February 24
• @businessuer
  
  The scenario will not take any effect still since you did not configure VLAN 3 to untagged a port. 
  
  Let me put in this way, refer to …

  in What is the difference between PVID , untagged and tagged Comment by Nebula_Adam February 23
• Hi @businessuer
  
  
  Thanks for reply.
  To answer your question:
  

  1. Step 1 and 3 will not overlap since step 3 is like assigning a port to a V…

  in What is the difference between PVID , untagged and tagged Comment by Nebula_Adam February 22
More Comments