Comments
-
No you need more rules over 28 to make this happen and I only just got it on 04-18 firmware I will make some more rules and let you test
-
Set “action when category server is unavailable” to block move rule to top of the list Might a VPN or proxy be in use by the client?
-
So if I have VLAN443 online only Zywall two way traffic fine If I have VLAN443, WAN2, WAN3 online with routing rule for Zywall to go out VLAN443 I get this I'm not sure but is it possible to have packet look fine without the added FCS for the routing rule for Zywall? And my modem to drop it without a FCS?
-
Testing here locally with FLEX200 V5.38 all is fine by a IKEv2 Enable Extended Authentication Protocol/Server Mode Can you do a check on a user by changing them to limited-admin this will show send code click that and see if you get a EMail
-
Can FQDN resolve IP subnet? No I FQDN can lookup the IP's of a DNS name bbc.co.uk 151.101.0.81 151.101.64.81 151.101.192.81 151.101.128.81 You can do *bbc.co.uk for WILDCARD for subdomain by DNS that happens LAN to WAN for the IP's it gets
-
sent
-
Have made it happen again under a new error I now have 28 routing rules If try to move bottom rule to top I now get error on reboot with 28 rule you can move 28 to 1 but add one more rule for 29 to 1 you should get error or add mor rules move them to the top until you do run into this error
-
I think the problem is to do with routing Zywall to a given interface VLAN443 with many WAN interface that was not a problem in V1.10 I test that later today and send you the packets update seems I can't make this happen now😖
-
I did remove some rules so that might have something to do with it I was seeing the error for a rule move bottom to top
-
problem link to this
-
problem linked to this