Comments
-
Chris, I hear what your saying and I totally understand but I ran into too many limitations on the NEBULA managment of the USG 700 than the straight CONSOLE Mgmt. Case in point... Where can I see the attached in NEBULA that is available in CONSOLE Mgmt under Configuration > Security Policy > Policy Control??? I would…
-
Well, I think I figured this out. When I first login the Search Box is set with Status=online OR status=alerting. Once I go in and clear the search and have the Status blank then all switches show up. My question still stands about what would cause a switch to still be active but go RED in Nebula. -stew
-
Nebula_Chris, yes, I removed the USGFLEX 700 from NEBULA Management and brought it up as CONSOLE management. Just my opinion but there are far more options for a device like the USGFLEX 700 under CONSOLE MANAGEMENT than NEBULA MANAGEMENT.
-
I switched the USG FLEX 700 over to Console Management yesterday. Reconfiguring and will report when I have findings. -stew
-
Once a device is attached to a site in Nebula it picks up the Nebula default password for all local devices under Nebula Management for the Organization. Also, once it's in Nebula the Console management becomes mute.
-
Read my post: Anyone using Zyxel Nebula? Yes, it's good hardware and software and the system is easy to understand and use. It has been around for years and more popular outside the US than inside. Pricing is right and the very limited subscription models they have are still fully functional as free without the…
-
Jimmy you know Nebula is simply a management interface pulling everything together in one pane of glass for you to look at, make changes (limited configuration changes) and determine status. It has been around for a few years and just recently jumped a version so we are all experiencing the upgrade at this time. My opinion…
-
The USG FLEX 700 is the site router. It handles all routing between the internet and the 2 VPN/ASA devices.
-
Chris, thanks for commenting. Yes,the link to one local ASA is IP 10.15.24.4 and the other is 10.16.24.6 Both of these pass PING traffic but neither of them pass HTTP traffic. I can't figure out why. -stew
-
I did get a reply fm ZyXEL TS. Here it is: I'm under USG FLEX > Configure > Firewall > Security Policy here are the fields to fill in for ICMP protocol on the WAN ports Name: PreFilled w SF_: SF_ICMP Action: Allow Application Patrol / Content Filtering Policy (PRO): As this is a PRO feature I suspect I could leave this…
-
Jonas - Thanks for your reply. Yes, I am familiar with adding the PING to a firewall with the USG series of routers by modifying WAN_to_Device and adding the PING Default_Allow_WAN_to_ZyWALL group. But I'm now trying to add the same thing to a USG FLEX 700 router through Nebula and I just can't figure out what to put in…
-
Duct-Tape...
-
Woolie You said: "I am now also aware that the APs are not designed to cover devices above it." I wonder what would happen if u mounted the AP upside down on the ceiling below the PC? Of course it might adversely affect the first floor coverage but curious minds want to know what would happen. -stew
-
I finally UNREGISTERED the 20 devices I had to MOVE to the other site and REREGISTERED them under the new site. Fort there life off me I could not figure out how to move a device between sites. Maybe it will work when the upgrade is posted.
-
VPN Remote Expectations! KISS - Keep it Simple Stupid -also- Keep it Stupid Simple FUBAR