jarok

Hi, Before reading your post I turned it into an env: # boot partition next_bootfrom = "2" curr_bootfrom = "1" and everything worked fine. Then I did a trick and made a kernel update from the previously working system on the SD card. Thanks to this, I now have two working kernels in NAND. (nand0.kernel1 and nand0.kernel2).…

Hi, I was able to start debian by booting the kernel from the console with the parameter -n "bootm -n /dev/nand0.kernel1.bb" Unfortunately, I don't want to start automatically, and every time I boot, I have to break loop from the console and type bootm -n. I am still looking for a solution on how to turn both kernels into…

Hurray, However, I changed the USB / TTL from PL2303 to CP2102 and it's beautiful. The logs show that it cannot load: Hit any key to stop autoboot: 0 booting kernel of type uimage from /dev/nand0.kernel2.bb Verifying Checksum ... Bad Data CRC Failed.booting kernel of type uimage from /dev/nand0.kernel1.bb ERROR: out of…

Hi Mijzelf, I thought so too because it looks like transmission errors but I checked the adapter on the ferguson fbox atv and it reads correctly. The same cable worked a long time ago on NAS325. I have the port set to 115200 n 8 1 (parity-none flow control-none), tested for windows and linux machine and the same effect. I…