mMontana

Comments

Unfortunately, the lack of changelog for lab firmware is… leading to a coin flip for "go for" or "wait until".

in Firmware V5.36(ABWD.0) issues Comment by mMontana May 6
Following as a hounddog. I'm questioning myself if the memory leak is part of the problem here.

in Strongvpn locks up USG60W Comment by mMontana May 5
@Zyxel_Cooldia are you in the condition to share what's missing for release? Soon is better than "not soon" but it's worse than "friday next week" for scheduling the upgrade/reboot procedure.

in Firmware V5.36(ABWD.0) issues Comment by mMontana May 5
A changelog is nice. Both for test firmware AND lab firmware.

in Firmware V5.36(ABWD.0) issues Comment by mMontana May 3
Following… Is there any chance that similar issues are affecting ZLD 4.x devices?

in Firmware V5.36(ABWD.0) issues Comment by mMontana May 2
AFAIK… it's not possible. Router EX5601-T0 have on WAN only one port set (1-65536, TCP + UDP). So for ports 50100 and 50101 you can forward them only to one address.

in ZYXEL EX5601-T0 - how to assign the same NAT forwarding ports to 2 lan IPs? Comment by mMontana April 29
The filename of the certificate you're trying to import can be shared? Which browser is used for upload the file? The hostname for the Firewall and the certificate is the same?

in Zywall ATP 800 "PKI certificate already exists." and 0 local certs Comment by mMontana April 27
AFAIK is almost correct. Neverthless, I'd use some different parameters. Considering how did you grouped services, Virtual Server is close to correct to me. Also, if your WAN interface is configured with the "User-defined External IP" I'd choose in "external IP" (instead of "User Defined" ) "WAN1_Interface_Host" or… the…

in I need to assign public access to my "Chat Server" Comment by mMontana April 27
If it can do that, you can look for "client mode". The AP acts like… wireless card for network cables (more or less)

in Zyxel NWA5123-ac Bridge Mode Comment by mMontana April 27
Up. Tunnel survived to a firewall (spoke) reboot, however still have to understand if it will work after a public ip change.

in Gateway confusion between two IPSec Gateways Comment by mMontana April 27
Which version of Android is running Samsung Tab S7+?Have you any declaration by Samsung that the Android version installed supports IkE v2?

in Firewall USG110 with VPN connection via IKEv2 is not working both on Preshared-Key or Cerfiticate Comment by mMontana April 27
Updates on the same topic. USG40 has updated to 4.73P1 (thanks zyxel for update a EndOfService product!). VPN has changed parameters: Gateway moved from 57600 seconds to 3600 seconds. Proposals were upgraded to AES192/SHA256. Connection proposals were upgraded to AES192/SHA256.

in Gateway confusion between two IPSec Gateways Comment by mMontana April 27
I'd vote for a … regression from this?

in ATP100W country code for AP? Comment by mMontana April 25
I'd go with these steps. 1: disable gateways on both sides. 2: double check both gateway sides 3: at "the center" (usually, one is the hub, the other is the spoke) disable "Nailed up". IMO ony the spoke side should have "nailed up" enabled. 4: keep connection check disabled on both sides 5: enable the Hub side gateway,…

in USG60 <> USG200 Site2Site VPN stopped working after WAN IP change Comment by mMontana April 22
I think you're willing to rephrase this quote. Firmware 5.35WK13 on USG Flex 50. Premature declaration or improper framing?

in Site-to-Site VPN between ATP200 and Cisco ASA 5516 Comment by mMontana April 21

More Comments

mMontana Guru Member

Comments