Zyxel_Kay  Zyxel Employee

Hi @YAck Thanks for sharing your experience. Your feedback on the Vodafone Station's compatibility is valuable. We'll consider it for future investigation.

Hi @Jldavid I need : 2 ports 2,5g 1 or 2 ports 10g Between 2 and 8 gigabytes ports LACP (IEEE 802.3ad) function Currently, our 10G Multi-Gigabit Lite-L3 Smart Managed Switch, XS1930-10 switch could be a suitable choice for you. For more detailed specifications and information about the XS1930-10 switch, you can refer to…

Hi @Jldavid The XGS1210-12 switch does not support the LACP (IEEE 802.3ad) function. It only supports the LAG (Static Link Aggregation) feature. For more detailed specifications about the XGS1210-12 switch, you may refer to its datasheet. If you have any further questions or need assistance with configuring your XGS1210-12…

Hi @PavSve Yes, we have included the feature of LED turn on/off feature on GS1200 Series switch to our roadmap and the schedule is currently being evaluated. Please stay tuned on for the latest updates. Your request for the port status LED turn on/off button for the GS1900 Series switch is also greatly appreciated. We've…

Hi @YAck Thank you for sharing the information with us. To further assist you, please send us the diagnostic file via private msg when it’s convenient for you. Additionally, including the MAC addresses of your PS5 and Samsung devices along with the file would be very helpful. This information will enable us to conduct a…

Hi @Thomas1959 I suggest attempting the following adjustment: Change the your new GS1920-HP Port 10 to PVID=10, aligning the configuration with your previous switch. This will help determine if guests in VLAN 10 can successfully obtain the VLAN10 IP addresses.

Hi @Thomas1959 Konfiguration der Ports FB7590 LAN 1 —→ Port 9 GS1920-8HP VLAN 1 Standard IP-Bereich 192.162.178.1 … 255 FB7590 LAN 4 —→ Port 10 GS1920-8HP VLAN 10 Gast IP-Bereich 192.162.179.1 … 255 If your configuration is as above, then you should set your ports' VLAN configuration as follows: GS1920-8HP Port 9 Type:…

Hi @kalgontbg First, please try rebooting your switch and then reconnect it to the LAN1 port of your AP. Sometimes, a simple reboot can help resolve connection problems. If the issue persists despite the reboot, we kindly request additional information to better assist you Model of your Zyxel unmanaged switch. Current…

Hi @Thomas1959 Konfiguration der Ports FB7590 LAN 1 —→ Port 9 GS1920-8HP VLAN 10 FB7590 LAN 4 —→ Port 10 GS1920-8HP VLAN 1 In addition to configuring the settings for Port 8 of the new GS1920-8HP, please ensure that you also configure Port 9 and Port 10 with VLAN10 and VLAN1 settings. Port 9 - Allowed VLAN10 Port 10 -…

Hi @Thomas1959 For a comprehensive understanding of the license purchase and activation process within the Nebula Control Center, you may checking out this article: This guide will walk you through the steps and provide insights into how to acquire and activate licenses effectively. When you proceed with the license…

Hi @Thomas1959 Please ensure that the VLAN configuration on Port 8 of the new GS1920-8HP is set up correctly to forward VLAN10 traffic. You may configure the switch port at Site-wide > Configure > Switches > Switch ports > the new GS1920-8HP/Port 8. Alternatively, if your Nebula organization is subscribed to the Pro Pack…

Hi @Billetiere To assist you further, could you please provide us with more details? The following information would be very helpful: Detailed description of your problem. Your network topology. The current firmware version of your Zyxel devices.

Hi @YAck To assist you further, could you kindly provide us with the following information: Are there any other client devices apart from your Samsung devices that are encountering similar connectivity problems? What is the current firmware version of your NWA50AX? Please collect the diagnostic file by navigating to local…

Hi @RyM First of all, you should make sure that you have created the necessary VLAN interfaces on your router. Following this, since your Port 4 is for the internet(to router), you should tag Port 4 with VLAN10. This tagging will enable devices from VLAN10 to communicate and exchange DHCP packets with the router. Besides,…

Hi @Mo7d As we've discussed in private msg, the symptom exhibited by your AP indicates a hardware issue. Kindly reach out to your local reseller to initiate the RMA process.