jonatan  Ally Member

This is your post in 2020, is the problem back again? Try to establish a connection from your phone to your USD 110 gateway? will the connection speed be as low? I have an ipsec tunnel between Zywall 310 and USG20-VPN, data transfer rate 5.5-7.5 MB/s (CPU USG20-PN is 100% loaded), the speed of both channels is 100Mbit\sec

HI @DmitryYudin Yes...there is no speed... I checked my l2tp connection speed and this is what I got: 250Mbit\sec home channel 100Mbit\sec channels in all offices USG 1000 25-30Mbit\sec Zywall 310 50-55Mbit\sec FLEX 700 95Mbit\sec

@whitetiger Hi, information here https://webservice.zyxel.com/end-of-life

@Grant Решение в этой теме: https://community.zyxel.com/ru/discussion/13259/chto-delat-esli-ne-rabotaet-kontentnaya-filtraciya-v-zyxel

@Asgatlat Hi, Not all fixes of weekly firmware versions are immediately included in the final firmware version. It may take several releases before all the fixes get into the final firmware version. So if you need to fix the problem now, install a weekly solution or wait for the final solution (sometime).

@Momo Hi,I have several 310 gateways, the message that they became EOL appeared back in April 2021 (before the announcement of the v5 firmware), I asked technical support and the latest firmware for the current USG series was supposed to be 4.63 + promised to fix critical errors for 5 years (in the form of weekly updates).…

@cavolo Hi, try to restore the functionality of your device according to the following instructions. https://support.zyxel.eu/hc/en-us/articles/4637859383698-Application-Patrol-Signature-issue-of-ATP-USG-FLEX-Series

@Breabl Hi, install the latest weekly firmware, problems with VPN connection breaks have been eliminated there. https://support.zyxel.eu/hc/en-us/articles/360005438274

Great

@Grant Поставщик услуг McAfee отключил обслуживание пользователей с Российскими IP. Производитель ищет решение этой проблемы.

Здравствуйте @Voland_87 Подключите к новому устройству консольный кабель, запустите сбор консольных логов через teraterm. Примените нужный файл конфигурации со старого шлюза, на чем "споткнулся" при применении конфигурации новый шлюз Вы увидите в логах.

@Maxinform Hi, I had a similar problem on USG 300, turning off Antispam and CF and then reloading the gateway helped.

Where is the mention of Windows 11 here ???

Hi @Zyxel_Kevin I think there are still problems...

On the demo page (https://zylab.zyxel.eu:4433/) of the UAG 60W gateway (it does not differ in functionality from yours) there is also a GoogleGoogle Authenticator setting. But there's firmware 4.70