tonygibbs16  Guru Member

You are welcome @Furball I have found that a WiFi extender has helped me get the coverage I need through my home. I am using TP-Link RE300 device, and that is good because it provides 5GHz as well as 2.4GHz WiFi when my Zyxel router does only 2.4GHz band. I am glad that you are finding the wifi analyser useful. Yes I found…

Hello @lucyparish Welcome to the forum. According to the manual, the WiFi LED cannot be red, see below, so it is probably amber. In normal operation it should be green or blinking green. from https://spdl.zyxel.com/DX5401-B1/user_guide/DX5401-B1_OPAL-Series%20(EX5601-T0)_UG_V5.15-5.70_Ed17.pdf You might want to switch it…

Hello @Furball Welcome to the forum. Do you know what version of firmware you are running in your device? There was a new version released in 2024, see below. In my experience, micro-stutters can be caused by WiFi interference as well as buffering. So you might want to look for WiFi interference using a tool. I use the…

Hello @Bern You are welcome. Have you been able to look at the user guide? That says that the web configurator IP address default is 192.168.1.1 , which would have a subnet mask of 255.255.255.0 and so the host connecting to it would have have a last octet value between 2 and 254 decimal. Kind regards Tony

Hello @Bern Welcome to the forum. I think that you have misunderstood what a subnet mask is and what it looks like. A subnet mask divides the network part of an IP address from the host part of the IP address. The default subnet mask for a 10.0.0.138 address is 255.0.0.0 Network Chuck has a free video on YouTube about…

Hello @Alaa Welcome to the forum. In my humble opinion, the way to get what you want is to take the top of and look, and also follow the approach of the people doing OpenWRT. See https://openwrt.org/docs/guide-developer/add.new.platform The OpenWRT project does not have this router's internals listed. You could also try to…

Hello @RichardXXX Welcome to the forum. Are you able to say what version of firmware you are running? The connection status screen will show it in the top right hand box, see below screen shot: from user guide at the following link: Nebula FWA505_V1.18_Ed2.pdf firmware 1.18(ACKO.4)C0 is the latest from September 2024.…

Hi Stefan @CloudByte Thanks very much for your reply. I have 2 final thoughts for your consideration: Do any of the Direction Settings make a difference? Are you using LAN to WAN or LAN to Router for example? 2. If there is still no difference in behaviour, then maybe you could log a Consumer Idea at the following link…

Hi @CntrlAltDel Welcome to the forum. The user guide available at https://www.zyxel.com/global/en/support/download might help you. - enter VMG3625 in the search box. Is it possible to set encryption or WiFi security to none? I think that it is if you use chose No Security as the Security Level , see below screenshot, but…

Hello @DarkPassenger Welcome to the forum. I think that the G0 means that your device is running an ISP customised version of firmware. The Zyxel generic versions end in C0. I don't know how to move from G0 lineup to C0 lineup. Happy new year and kind regards Tony

Hi @Jamiewyc Welcome to the forum. In my humble opinion, the way to get what you want is to take the top of and look, and also follow the approach of the people doing OpenWRT. The OpenWRT project does not have this router's internals listed. You could also try to capture a boot log on a console. - Matt Brown's YouTube…

Hi @defra Welcome to the forum. In which Zyxel product have you found the bug please? Kind regards, Tony

Hi @gillou2000 Welcome to the forum. According to the user guide, incoming calls have to be explicitly enable, see below extract. extracted from https://download.zyxel.com/LTE5398-M904/user_guide/LTE5398-M904_EU_1.00_2.00%20Ed2.pdf linked from Downloads at…

Hello @Shakeeb Welcome to the forum. From my reading of the user guide, the EX3301-T0 cannot do what you want, see below extract. from https://spdl.zyxel.com/AX7501-B1/user_guide/AX7501-B1_OPAL-Series%20%28EX5601-T0%29_UG_V5.15-5.70_Ed17.pdf Happy new year and kind regards, Tony

Hello @Romper That might be your only current option, as Zyxel has declared your device End of Service and there are no firmware updates dated 2024 shown, see below: Happy New Year and Kind regards, Tony