評論
-
Hi @businessuer, Kindly inform you that there is no setting to configure notifications of firmware upgrade avaiable on NCC. However, once your device has available firmware and close to the automatic upgraded time, our system will notify you an email as following: Sender: info@nebula.zyxel.com Email title: Scheduled…
-
Hi @dw15693, I use a Macbook Air to connect to GS1900-24E via WiFi router SSID, wired, and AP's SSID by using Chrome/Safari and it's working. You mentioned that your wired PC and a PC connects to an access point has no issue while connecting to GS1900-24E GUI. Were you using this Mac to run these tests as well? Is so,…
-
Hi @dw15693, Welcome to Zyxel Community! I could access to GS1900-24E web GUI throught management VLAN from router WiFi on my local test. May you try to use a different browser or private browsing (Incognito mode) and access again?
-
Hi @maja202, Welcome to Zyxel Community and sorry for this late response. For current design of XGS1250-12, it needs to set a port PVID to the same VLAN as management VLAN. For example, if you would like to set your management VLAN to 2, you need to: 1. Create VLAN 2. 2. Set one of ports PVID to 2. 3. Configure switch…
-
Hi @PTish, Thanks for your reply and confirming boot version. It's a valuable input that downloading tech support fail can also be fixed by disable and enable PoE feature again. We actually have a direction this week and it's also related to the tech support issue you found. Thanks again, for all your efforts and patience.
-
Hi @businessuer, I understood. We will help you to put your wish to idea section, there will have agents to check if the feature request is valid.
-
Hi @businessuer, I am sorry, but I think you misunderstood my words. As I mentioned that you can use "clear ip dhcp binding" to clear a specific inactive host, so you are able to do it by using commend line indeed. However, what I mean by inquiring you if you've seem any practical case is that does anyone implement this…
-
Hi @PTish, Thanks for your reply. That's because you clicked the "Apply" button twice, so the switch shows "tech support is generating for others", then it indeedly nothing happen. To download tech support can only click the button once and wait for it to be exported. I believe you restarted your switch after finding this,…
-
Hi @businessuer, perhaps there can be a feature to generate a list of offline devices and remove them from the dhcp pool? > The way you thought is similar to what DHCP lease time does, DHCP lease time is more likely in a inactive way (wait for the time to expire) but in a active way of yours, and it may cause more…
-
Hi @Chris77, It's because the tool does not support to display decimals value, so it round the number.
-
Hi @Chris77, I am sorry I miss one number on OID, the correct one is .1.3.6.1.2.1.105.1.3.1.1.4.1 Please help to check it again.
-
Hi @businessuer, Can you give me a screenshot of how to do it in standalone device? Can you implement similar feature in NCC? We don't think it will be a frequent used feature if DHCP release time is set in a reasonable value. May we know what is the application that you would like to use this feature on NCC platform? Q5:…
-
Hi @businessuer, Regarding your Q1 and Q3, we have a DHCP lease table in Live tools. You can check it in Security gateway > Monitor > Security gateway page. Q2: How do I clear inactive users? (clear ip dhcp in cisco) > We do have no such a feature on NCC, but we also have "clear ip dhcp binding" command to clear a specific…
-
Hi @Chris77, I try the same firmware and use snmpwalk and iReasoning Mib Browser to query OID .1.3.6.1.2.1.105.1.3.1.1.4 then it works well. May I know what tool you are using?
-
Hi @BobETSmith, Sorry, I did reply your message last week, but do not know why my message was eaten. For non-VLAN aware devices, I set it to the VLAN ID and use Untag VLAN member? > Yes, but you also need to configure PVID to 101 for your port 01 (to Server) as well. So I can only set one management IP on the XGS1250? >…