tonygibbs16  Guru Member

Hello @Zhonnie Welcome to the forum. Am I correct in assuming that you are using ADSL? Looking at https://www.telekom.de/hilfe/downloads/routing-modus-dt-version-zyxel-vmg1312-b30a.pdf I think that the VLAN section does not need to be used with ADSL. The document says against the VLAN section "Bitte nur bei einem VDSL2…

Hi @jgr I think that you have to do all of them in sequence, i.e. upgrade to R11A06 then upgrade to R11A07 then upgrade to R13A02. I think that the DFOTA module upgrade files only work with this sequence. Then you will have the latest module firmware R13A02. Kind regards, Tony

Hello @jgr Welcome to the forum. You have to install them one by one and in order, so you upgrade to R11A06 first, then upgrade to R11A07, and then upgrade to R13A02. The R11A07 release notes are at https://us.v-cdn.net/6029482/uploads/editor/uv/vttwhdse7tik.pdf The R13A01 release notes are at…

User Guide downloadable at https://www.zyxel.com/uk/en-gb/support/download?model=nr7101 in section 18.7.1 says MD5 and SHA1.

Hello @HQWR Welcome to the forum. I guess that it depends on what information the Certificate Authority requires before they will generate a certificate. https://www.digicert.com/kb/csr-creation.htm is what DigiCert say, where they say that the location can be finalised after the Certificate Signing Request has been…

Hello @Antonhdt Welcome to the forum. What firmware have you got installed? If it has ABPM in its name, then the V5.50(ABPM.6)C0 linked from the following post might help you. The firmware is based on OpenWRT, see Kind regards, Tony

Hello @mhasamah24 You are welcome. Yes, I am saying that you would need to use a router after an ONT, on the customer premises side, and then run the VPN on the router or on a computer connected to the router on the customer local area network. Kind regards, Tony

Hello @mhasamah24 Welcome to the forum. I don't think that you will find an ONT with VPN built in, as an ONT is more an OSI-RM layer 1 (physical) and layer 2 (data-link layer) device. An ONT would solely do conversions between optical and electrical Ethernet with some management as well. VPN is more at OSI-RM layer 3…

Hi my friend, I know understand, but I don't what the password for the log tar file is. @zyxel_jerry previously wrote the following to another user: "You can private message the log .tar file to us by following steps below, Click username which you want to sent the private message. Click "Message", now, you can enter your…

Hi, According to https://www.routeripaddress.com/routers/12398/zyxel-armor-g5.html the default password code be 1234

Depends on your online game. If it uses short packets in real-time, then packet length will be good. But it depends...

Hello @toni201 Sei in grado di condividere la soluzione pubblicamente, per tutta la comunità per favore? Ciao, Tony

Hi @Mehdi_13 friend, ok. Do you have logging turned on, and is there anything in the logs to say anything about openvpn trying to set-up and about its failing please? If logging is not enabled, could you enable it and try it again to see if any logs are available for you to share here? Kind regards, Tony

Hello @MarkHinton Welcome to the forum. Zyxel has said that they have no plans to provide Vlan tagging on the WAN interface to the Armor G5, see below post Kind regards, Tony

Hello @Mehdi_13 Can you describe your problem then? Kind regards, Tony