Wicky  Freshman Member

idd but I want to disable 2.4Ghz only for a subset of AP's. I have already 2 SSID's. All AP's need to broadcast on 5Ghz for a specific SSID 1 and only a subset of them on the second SSID 2. Why ? Well the penetration in my house is such that 2 AP's are enough on 2.4Ghz to cover the whole house. Further I can only use 2…

Hi Dean, Well for me that would already be a good point to have the live values of the RSSI. But also hand-over time if roaming happens would be something that is valuable. Regarding the heat map. I'm fully aware that it would require much more effort but I believe if you could make this work with you mobile app. That…

Hi Dean, I perfectly understand that enabling live monitoring is not ideal to have continuously running. But if you have already a live stats framework (TX rate, RX rate, etc...) that would be ideal if that could be enabled/disabled when needed. Simple things as what client is currently connected at what point, TX, RX…

Hi Dean, Would that be an idea to have this info pulled from the AP’s immediately ? Or to be able to set a much high refresh rate during an active monitoring period ? The data is lingering behind when trying to use current stats to diagnose. That was one of the reasonings also behind the active polling/changes idea. So…

I get the impression that on other places quite some delay is observed is when looking at stats. And example is when looking for clients attached to what AP. Although roaming has already been taken place the status is not reflected quick. I have no idea how frequent status of AP is send to the cloud control or polled but…

Hi James, Thx for the answer. Waiting for 2018 and this fast roaming and RSSI settings will optimize my deployment at home even further.

Hi Dean, So my two ideas about RF scanning (I have seen this feature on another brand, although this AP was not accessible during the 5 min scan period) and customization of channel set (instead of default 3 or 4 channel deployment) are more relevant now as DCS is not able to tackle a channel with heavy interference.…

Is this feature still on the list for implementation on the next phase of the nebula software ? I'm interested to configure this through software ?

Hi Dean, Indeed. Certain in page updates reflecting changes are not up to date and now it is hard to find out when the actual changes are effective. So either a provisioning button or more frequent polling of the status shown.

Thx for the update James, Maybe another feature request. Display warning or status when RADAR is detected by the AP and you have fixed a channel in the 5Ghz band overruling your selection. Fiddled an hour to find out that a radar event (event log) caused overriding my channel selection. Searched to the event log and…

Hi James, Point 1 : Initially thought it was due to HP POE switch set to max output 15.3W. However switching to POE+ didn't change a thing. I have added two pictures to demonstrate what I observe. Pic 1 max 17dBM while 30dBM is allowed according to country specs. Nowehere I have seen anything more then 21dBM for 5Ghz POE…

Hi James, Thx for the update. - Regarding the max output setting. I will check but what I have seen looks like the locking is a max. But the actual value is regularly lower then the maximum. So it looks as it not a fixed locking only an advise not going beyond. Therefor my question. Especially if you do a survey you can…

Any news on this ? I have currently an NAP203 & Ubiquiti HD for testing. Some features look interesting to have. - Minimal RSSI values settings to dissociate clients - Possibility to perform an RF Scan to detect intereference and display this - Airfairness option - Possibility to fix power output instead of only settings…