Zyxel_Sally 
Zyxel Employee
Comments
-
@vrb_dst Thanks for you choosing Zyxel product. There are two way introduce how to configure scheduler for you refer: Here is SSID scheduler via WEB GUI. Please go to CONFIGURATION -> Object -> AP Profile -> SSID -> edit the profile -> Enable Schedule SSID. If you want to configure it via CLI, here it is. Router> configure…
-
@mrobo Many thanks for you choosing Zyxel product.Armor Z2 does not support OpenVPN, it only support VPN Pass-Through for PPTP/L2TP/IPSec. Please refer the SW feature as below:https://www.zyxel.com/products_services/armor_z2.shtml?t=p#productDetailTab5
-
@Mike Thanks for you choosing Zyxel device. In order to provide you with a better assistance, we have contacted you via private message to get more information.
-
@HomeUser213 Many thanks for choosing Zyxel product. The reset button is next to the SIM card slot. Press the button for 10 seconds and release, the router will start to reset.
-
Welcome to ZYXEL COMMUNITY HOME FORUM! The maximum concurrent users supported as below: NBG6817 support 128 WiFi clients for 2.4GHz and 5GHz. NBG418Nv2 support 19 WiFi clients for 2.4GHz. NBG6503 support 32 WiFi clients for 2.4GHz and 5GHz. Just a friendly reminder, These WiFi clients connected to the same network and…
-
@TaKula Many thanks for choosing Zyxel product. In order to provide you with a better assistance, We have contacted you via private message to get information. Please check you message box. Thanks.
-
@Lektem Thanks for your information, you might setup your NBG418Nv2 by follwoing step.1. Disconnect the data cable from cable modam.2. Push NBG418N v2 WPS/Reset button over 10 secs.3. When NBG418N v2 boot up success, connect data cable to NBG418N WAN port[Blue port] and PC to LAN port[Yellow port]4. Login NBG418Nv2 with…
-
@Lektem Many thanks for your detail to describe this situation you have.At AP mode, now not support NTP time sync fnction.I might suggest you use router mode instead of AP mode in order to reach your goal.Router mode support NTP server, and then the Wi-Fi scheduling could be work at your place.Thanks for your experience…
-
@williammcainsh Welcome to Home Forum. NBG6617 is currently not supportive for static route,I have moved your post to the idea section for discussing.
-
@tidyho Sorry for let you confused. I would like to explain you that now we only allow private local access the USB, not public WAN access.We are appreciate for your idea and will provide it for internal evaluation.
-
@mrobo Dear mrobo, in order to provide you with a better assistance, we will contact you through private message to get purchase information.
-
@desmbr Currently NBG6515 USB file system could support FAT16/ FAT32/ NTFS/ EXT3. NTFS should could provide you more large file to store. Thank you.
-
@YSI Many thanks for you choosing Zyxel product. Since VMG1312-B10D is SP model, so it shall has customize configuration file, so we might suggest you contact your ISP or local support to resolve your problem. Sorry for if cause you inconvenient.
-
@saxophone1966_EL Many thanks for you choosing Zyxel product. As your question, I might suggest you to find your ISP or local support for your concern. Since VMG1312-B10B is not consumer device, so it might has customize setting at different country/ISP. Therefore, please kindly find your ISP/local support to resolve your…
-
@tidyho Currently Z2 could provide LAN/WLAN access USB port device by FTP/Samba/DLNA. Therefore, as your setting at Z2 might not active at present. I will internally suggest this idea and hope give you update asap. Thanks for you choosing Zyxel produce.
