USG20-VPN - невозможно подключиться по IP

a1601
a1601 Публикаций: 30  Freshman Member
First Anniversary 10 Comments Friend Collector

Добрый день!

Проблема с USG20-VPN: не могу подключиться по IP. Загружается нормально (Sys мигает, потом горит зеленым), подключение по сети показывает 1Гиг, но IP адрес подключенному компьютеру не выдается, так же не виден сам шлюз по 192.168.1.1 (даже если задать адреса принудительно в свойствах адаптера).

Делал сброс через кнопку, обновлял прошивку по FTP (с 4.16 до 4.65 поэтапно, далее обновлять пока не стал), так же восстанавливал прошивки - не помогло. FTP для прошивки на 192.168.1.1 успешно поднимается, то есть порты вроде рабочие.

Из консольного лога:
Kernel Version: V3.10.87 | 2021-07-04 00:07:25

ZLD Version: V4.65(ABAQ.0) | 2021-07-04 00:36:27

INIT: version 2.86 booting

Initializing Debug Account Authentication Seed (DAAS)... done.

Setting the System Clock using the Hardware Clock as reference...hwclock: The Hardware Clock does not contain a valid time, so we cannot set the System Time from it.

Unable to set system clock.

System Clock set. Local time: Fri May 19 05:41:16 GMT 1916

INIT: Entering runlevel: 3

Insmod ZYKLOG Module. Starting zylog daemon: zylogd zylog starts.

Starting syslog-ng secu-reporter.

Starting ZLD Wrapper Daemon....

Starting uam daemon.

Starting myzyxel daemon.

Starting periodic command scheduler: cron.

Start ZyWALL system daemon....

Starting link_updown daemon.

[zy_adp]load ZyADP Ver1.0.0 OK

INIT: Cannot open app. watchdog PID file.

Далее еще такое:
Use system default configuration file (system-default.conf)

ZyWALL system is configured successfully with system-default.conf

Got LINK_CHANGE

Port [2] Copper is up --> Group [2] is up

Welcome to USG20-VPN

Username: sshipsecpm is dead at Fri May 19 05:53:29 1916

App watch dog try to recover sshipsecpm at the 1 time

INIT: [10000] Core dump: Send the signal to notify app. watchdog [8784] to recover this app. if necessary.

sshipsecpm is dead at Fri May 19 05:53:30 1916

App watch dog try to recover sshipsecpm at the 2 time

INIT: [10020] Core dump: Send the signal to notify app. watchdog [8784] to recover this app. if necessary.

sshipsecpm is dead at Fri May 19 05:53:31 1916

App watch dog try to recover sshipsecpm at the 3 time

INIT: [10029] Core dump: Send the signal to notify app. watchdog [8784] to recover this app. if necessary.

Позже добавляется:

Unable to connect ZySH daemon

command function history:

0x100dc1d0 argc:1 args:

0x100c5018 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100c5018 argc:1 args:

0x100c5018 argc:1 args:

0x10021ca8 argc:3 args:debug entries

0x100c5018 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100c5018 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100dc1d0 argc:1 args:

0x100c5018 argc:1 args:

0x100dc1d0 argc:1 args:

И потом такое постоянно.

Можно ли реанимировать?

All Replies

  • a1601
    a1601 Публикаций: 30  Freshman Member
    First Anniversary 10 Comments Friend Collector
    отредактировано марта 2023

    Больше не актуально. Аппарат сдал на запчасти.