JS87 
Freshman Member
評論
-
Thank you very much! But wouldn't it been better, when the next firmware realise there are SFP+ modules active and then prophylactically turns the fans a lil bit more, instead of that switching between some values from real time information? At the moment it's switching between 5600 and 5900 which aren't annoying values…
-
Now you can hear it in the YT-video At the moment of filming, it were 22°C and still 45% humidity
-
I was able to track it now with the CLI: usgflex700h> cmd fan-get Sensors[0]:45 degress C Sensors[1]:40 degress C Sensors[2]:54 degress C FAN[0]:2728 RPM FAN[1]:0 RPM FAN[2]:7769 RPM FAN[3]:0 RPM usgflex700h> cmd fan-get Sensors[0]:46 degress C Sensors[1]:40 degress C Sensors[2]:55 degress C FAN[0]:2597 RPM FAN[1]:0 RPM…
-
Hi Kay! Thanks for your reply! When I came home after work, I turned on several more devices and the CPU went up to 14% and since then, the fan stays the same :/. So I guess the values don't matter at the moment: It is the latest V1.30(ABZI.0) Sensors[0]:45 degress C Sensors[1]:40 degress C Sensors[2]:54 degress C…
-
Thank you very much for the USG flex 700H! That's all we wanted! 😍
-
Hey @Zyxel_Melen Any Idea?
-
Its not SCXXXXXXXBC. It is 5CXXXXXXXBC and matches the MAC-Address range of the switch in your screenshots from the WebGUI. The serialnumber is very blurry. It is the label over the MAC-addresses. The beginning matches with your WebGUI screenshot: S14… Found your thread on reddit and hope you find answers because thats…
-
Hey Jeff Thanks for your reply. Nope… 1Gb/s SFP is already in use with the Zyxel ATP100 for some years, but the change to a 10Gb/s (home) network isn't that special in 2023. So to summarize it all: The only Zyxel Firewall with a SFP+ interface is the USG2200 for around 10'000$. EDIT: And with the upcoming devices, only the…
-
Yeah… I should say, that this was of course, all ATP features were activated. All my fault. Sorry for the late response
-
A centralized solution!
-
Yes... Fiber-cable with SFP/miniGBIC from the wall-socket into the modem. From the modem with Ethernet (copper) into the WAN of the ATP100. Speed: 650-700Mb/s Fiber-cable with SFP/miniGBIC from the wall-socket into the SFP-slot of the ATP100. Speed: 400-500Mb/s Firmware is V4.60(ABPS.0). EDIT: Perhaps I should add, that I…
