Rory 
Ally Member
評論
-
It may relate to firmware version of your NAS, since the old manual has mentioned the files you said but the new one does not. ftp://ftp.zyxel.com/NAS540/user_guide/NAS540_V5.1%20ed2.pdf My Dropbox of NAS540 works as latest user guide: ftp://ftp.zyxel.com/NAS540/user_guide/NAS540_V5.21%20ed2.pdf
-
Do you mean this function?
-
What's your NAS model and FW version?
-
Do you mean that you can't find NAS326 via SMB? If yes, you can refer following FAQ to enable SMB1.0 of Win10. https://homeforum.zyxel.com/discussion/850/how-to-find-usb-share-in-windows10#latest
-
Did you try to reboot or reset your NAS326?
-
If possible, you may change the HDD model, seems ST2000NM0011 is not in nsa326 hdd compatibility table. https://www.zyxel.com/products_services/2-Bay-Personal-Cloud-Storage-NAS326/compatibility
-
@dsz376 You should use "root" to check commands.
-
Moreover, try to upgrade FW of NAS326 to latest.
-
Did you change the HDD to different slot for checking if problem related to specific HDD or slot?
-
If your RAID is RAID 1 or JBOD, you can try to get data from Linux: http://kb.zyxel.com/KB/searchArticle!viewDetail.action?articleOid=010795&lang=EN
-
zyxel nsa325 v2 hdd compatibility table: http://il.zyxel.com/ProductTab.shtml?pid=20150327120001&idx=3&c=gb&l=en procedure: The steps as below: 1. Power off NSA325v22. Plug-out disk2(1T HDD)3. Plug-in 6T HDD as disk24. Repair the RAID15. Repair finish6. Power off NSA325v27. Plug-out disk1(1T HDD)8. Plug-in 6T HDD as…
-
Try to enable SMB v1 in your PC as below: https://homeforum.zyxel.com/discussion/850/how-to-find-usb-share-in-windows10/p1
-
Did you enable "Email Alert" or "Email Report"?
-
Did you try to access NAS IP from your own LAN to WLAN? If this also can't work then the problem may relate to router's configuration.
-
My suggestion is power off your NSA325 first then pull out it.
