baba 
Master Member
評論
-
J'ai supposé que tu ne pouvais plus accéder à l'assistant après t'être connecté. Alors tu dois quand même attendre le support Zyxel Best, baba
-
Click "Logout" in the upper right corner
-
Got it! Need "only" one NAT and one Policy Route with snat outgoing-interface at FLEX 200 on the right and a security policy on the left USG
-
It also does not work with second NAT rule on 200H :/ I can see the request via traffic-capture on USG shared vlan but not on the vlan where the server (10.70.70.1) is in
-
No, the FLEX 200H should act as main router. Only some clients should be also reachable via double NAT through FLEX200.
-
Also 10.50.10.50 should have 10.70.70.1 as gateway by default. Only when requests comes through 10.70.70.2 response should go back through 10.70.70.2
-
Any other ideas? Thanks! Best, baba
-
Hi @PeterUK the static route does not help :/ You might need a routing rule on FLEX200H incoming LAN 10.50.10.0 source 10.50.10.0 next hop 10.70.70.2 SNAT none This route would forward all traffic from DMZ (10.50.10.0/24) to 10.70.70.2 but that's not correct. Only when requests comes through 10.70.70.2 response should go…
-
I've a policy route on flex 200 with 10.50.0.0/16 with GW 10.70.70.1 but it does not work. Must it be a static route?
-
@PeterUK 10.50.10.50
-
I've gotten to the point where I only want to forward certain ports, but I can't get it configured Thanks!
-
Please, it's a very important feature
-
Hi @Zyxel_Melen vlan assignment with RADIUS is already working. I want to use the RADIUS User password as DPPSK to have user based authentication on WPA2/3 Standard (not Enterprise) SSIDs. Thanks! Best, baba
-
@Zyxel_Joshua thank you for the detailed explanation! If you have any idea about the wan route then you have made me happy! Thanks!
-
10.70.70.20 has 10.70.70.2 as default gateway. If 10.70.70.2 hop will be skipped when coming from 10.50.0.0/16 then 10.70.70.20 can not answer, or I am wrong?
