mMontana  Guru Member

Got it. With the security advisory. And applied.

As my point of view, @Zyxel_Melen, onsite personnel for replacing the device is still necessary. Deliver a man with a laptop and a cellphone for remote deploy of the configuration (and a security-enabled personell for deploy) accomplish more or less the same workpower needed for use Nebula (a person for the hardware…

The behaviour you're describing, while it's not the one you would, makes sense. Unless you split your switch into two sections with two vLANs (one for the WAN interface of your FRITZ!box + ONT, one for the devices + LAN interface of FRITZ!Box) you won't have anything different.

Next week is patch week. End or beginning of the week?

AFAIK PoE nowadays is an umbrella term for a bazillion of standards, starting from 802.3af and ending with 802.3bt and several alternatives/modes for all types. IMVHO switches and AP specs should be reviewed thorougly including the (possible, not granted) backward compatibility.

I'm sorry… This part… Configuration can be restored when a cloud-stacking switch slot is replaced with an identical model. (Nebula Pro Pack license is required) On premises, if any device or module dies and is replaced with an identical model I can restore the previous config (if I had a backup). On Nebula, with…

Thanks for sharing that link… As far as I read, OpenWRT actually allow configuration of features that are already available on the hardware… on the stock firmware of these APs. If the wireless chip soldedered into the AP do not comply with 802.11r, OpenWRT cannot configure and use that feature; OpenWRT also does not…

Hi @Gienek, personal opinions from here… Sorry I can't quote you direcly, the function has been disabled from this platform (unfortunately) Roaming between the APs is still not really fast. The only improvement of roaming, achieved by using NWA50AX is caused by newer hardware and better architecture, when compared to my…

According to documentation… Operating temperature (not storage) NWA55AXE -4°f WAX655E -40°f Both supports PoE, which I'd use as way to power the AP. Also… AP will be a heating source inside freezers.

"Vulnerability fix" is understandable. Full disclosures might be source of issues, but please… At least state some ETA for the disclosure! Consider that for some safety/privacy procedures, lacking of the minimal information for assess the risk might lead to a delay for this version adoption!

I'm not laughing, because release notes are not funny at all. Not even a ETA for full disclosure?

Where is the security advisory and announcements for 5.39P1 firmware?

Obsolete spec. @PeterUK two groups to update instead of one if you're using a zyshell script to update a service check; if things goes south, two security policies instead of one. And different scripts for any "obsolete spec" device.

Sorry for the late reply (please, reinstate the capability quote of messages!) > Due to the segmentation of device specifications, we cannot enlarge it. So this is a designed limitation? I can understand older devices could have memory issues, but I'm referring to the Zywall 5 era, or the first generation of USG (ZLD…

@Zyxel_Kay thanks for the detailed answer. If configured via ZON utility, do not allow disabling the default profile/SSID makes some sense, however… If i'm accessing from wireless network instead from cabled interface make more sens to provide a costrain nor a warning before apply the setting change (disable the only…