Hill 
Master Member
Comments
-
If WRE6505 is AP mode. (Internet---Router---WRE6505---Laptop, --- : Ethernet Connection) You should able to find its IP address on the DHCP table of your router or use IP scan tool to find. Then use its IP address to login WRE6505's web interface to configure it.
-
Reset1. Hold WPS HW button till Power LED as Green Blinking and wait for 2-3 seconds, then release it.2. After released WPS HW button, LED: Power and WPS as Green Blinking to OFF, then LED: WiFi as Red and OFF.3. After booted up, the setting back to default.
-
What kind of mode that you want to set up on WRE6505? AP or Repeater? AP Repeater
-
Here is my test result. WRE6505---[Ethernet Cable]---Laptop 1. WRE6505 set as Repeater mode. 2. Hold WPS HW button till Power LED as Green Blinking and wait for 2-3 seconds, then release it. 3. After released WPS HW button, LED: Power and WPS as Green Blinking to OFF, then LED: WiFi as Red and OFF. 4. After booted up, the…
-
I am supposed to turn on the WRE6505 and connect my computer to the wireless network form the WRE6505 and then go to zyxelsetup login site. 1. The network from WRE6505 has no internet connection. Because WRE6505 hasn't established the connection with your router to cause no Internet connection. 2. So I try to connect via…
-
Hello @Vr4nckuh, Can you explain more details what kind of the problem you encountered? What is the firmware version of your Armor Z2? From your log, it seems that related to UPNP. Is there Double NAT in your network environment? Please share your network topology.
-
Not sure the tftp client ... block #0 ... Any screenshots?
-
Disabled the wireless on NBG418Nv2 or ... ? What do you mean "tftp client = block #0 ..."? Does 192.168.1.33 as DHCP or static IP? Can you share the screenshot of your laptop IP address information?
-
Your laptop should be connected to LAN port of NBG418Nv2 via Ethernet cable. And NBG418Nv2 default LAN IP is 192.168.1.1, then your laptop IP would be 192.168.1.X (DHCP).
-
Is 192.168.0.33 got from NBG418Nv2? What is gateway IP address? Did you try to reset NBG418Nv2? What is your network topology?
-
Did you try to reset NBG418Nv2? Does it still not work? Here is recovery steps for your reference. 1. Download the tool from this "link". 2. Power off NBG418Nv2 and plug Ethernet cable to LAN port of NBG418Nv2. 3. Choose NIC interface of laptop which is connected to NBG418Nv2. 4. Select "Image" and click on the "open"…
-
As far as I know NWD6605 has US and EU version and it is wrote the country code on its flash that cannot be changed. Your NWD6605 should be EU version and I think there is no way to change its country code. 5 GHz Operating Frequency of EU version on NWD6605: UNII-1: 5.15 ~ 5.25 GHz (CH36, 40, 44, 48) UNII-2: 5.25 ~ 5.35…
-
May I know what is the purpose? Do you encountered the problem on NWD6605? If yes, please share more details.
-
As far as I know, number of bridged device per station is 8 and number of overlapping network is 4. For "will the units jump from one phase to another in a 3-phase wiring?", I think it will reduce a lot of performance, not suggestion. Normally, power line device is use on the same electric circuit.
-
Hello @Jethronom, Can you explain more detail information what kind of problem you encountered? Do you mean, after WRE6505v2 worked for a while, all connection got fail, then you need to reset and re-configure? What is the firmware version of your WRE6505v2? What is your network topology? How do you connect WRE6505v2?
