RTH10  Freshman Member

@Nebula_Freda, many thanks for the hint with the DFS channels; It seems that this has addressed the mesh uplink instabilities and disconnections. Small question: there is no access to the "Avoid DFS channels" in AP radio setting in NCC; So what I did I switched to the manual configuration and ticked the 36, 40, 44, 48…

I have now observed that after the reboot of the wireless AP the uplink is always over 5GHz; However after some time (a few hours) the smart-mesh Repeater AP Disconnected cause by Beacon Miss event can be seen in the logs; the wifi connection is lost momentarily and the uplink reconnects over 2.4GHz as stays there until I…

I have started seeing the following event in the logs: Repeater AP Disconnected cause by Beacon Miss. how to prevent it from happening ?

Hmm, I had this option enabled since the very beginning. And it did not seem to help much or even at all. Still as I have devices that can only work over 2.4GHz I really had to use the client steering with the empirical settings to prevent the dual band devices from connecting over 2.4GHz; Actually what I think AP should…

Thanks, I would have uploaded logs but the NCC offers logs download only as a paid feature. ad 1 the signal is very strong; both AP are less than 10 meters away on the same floor level; ad2. Actually I had already tried this approach and lowered the 2.4Ghz signal power from 20 to 8 dBm but it did not really help; I also…