Triu  Freshman Member

Started without the ' usb_key_func.sh key', here is the output to "ls -l /usb/bin". But it's enough for me for today, have to get up early tomorrow.Thank you for all your help.

Can give him the ifconfig (edited last post before i saw your new one), but the webinterface still doesn't work.What exactly do you mean with try 'telnet'usb_key_func.sh? Boot from it or give it to the running system? Plugged it in without reset, gives me: And then the loop goes on. Tried to open usb-stick to run the…

At the end of its process, before i can give him a new IP this happens and loops: Ahhh, can give him new ip but then the next loop: And no access to the webinterface (no page was found). But can make inputs, disrupted with new lines of errors. Searched for other scripts in that folder....why is there a "open_back_door.sh"?…

I'm using a single monitor here (Laptop), also tested to change password in webinterface with an android tablet before, same results. Changed password with "smbpasswd admin" and logged in with new password, but have again only the "user desktop". The firmware i can see only on the serial monitor, should be 520ABAG1b2. When…

I tought about that but then discarded this because my router told me the IP. How can the NAS not have it when the router tells me? (maybe an old entry?) Anyway, it works. ;)Now i am on the webinterface but can't change the password, a window pops up which tells me i have to change it, i put in a new one and will then be…

There are two IPs i get, the first is that from the "dhcp" command in the beginning. At this time there is no dmesg and ifconfig. After booting the uImage the NAS will be shown in my router as NAS542 with another IP. (it is on the same port, cause only one port is connected). Then i can do the dmesg and ifconfig. Hmmmm,…

Unfortunately no interface. I tried with IP and "NAS542". With my NAS520 (yes i have another one) the appropriate IP works. Some of the last lines in the log tell "the interface None/bon0/bond1 is down or unusable", can i start the interface manually? At the end of the Log i have access to the filesystem. If i type help i…

I have changed this bootargs in /env/config. There was this second line so i haven't changed it.Now i understand this injection and deleted the old stuff and have now only your bootargs lines in the config. Your first option works, but at the end the beeper gives a beep every second. (Log attached) Something is better now,…

Saveenv works here, great.I exchanged the first bootargs line in the config file with yours, the second bootargs line i didn't touch. Unfortunately it seems i had problems with the line length, output after "Starting kernel" was:commandline: console=ttyS0,115200n8, init=/etc/preinit pcie_gen1_only=yes mac_addr=,,<br> So i…

WOHOOOO.......a little bit. After alot of trying i found out how to save in the "edit" tool (this is stored till a reboot). Close window with "CTRL+C" and save with "CTRL+D". Now i need a little hint what to do with that, cause simply "boot" is the same as before (cause he already switches to the second one). I tried this…

/env/bin/boot /env/bin/update_kernel

/env/bin/b1

/env/bin/b2

/env/bin/b0 /env/bin/hush_hack /env/bin/_update_help /env/bin/init /env/bin/update_barebox

Oh, didn't know that, will go through all files again. Thought it depends on the monitor itselft and it would scroll automatically when i mark it with the mouse. Thank you. Unfortunately i have no vi, nano etc. All i have is "edit". Oh yeah, there is alot more to see now. I post everything here so no need to scroll to the…