Comments
-
I appreciate the ideas.
-
Yes, both Gates have WanIP public facing IPs. I would hope that if it was a traffic issue, it would not take a restart of the appliance to fix it. It would show excessive traffic in the logs and on the cpu. And the tunnels wouldn't fail to shutdown or restart through the webUI.
-
No IKE2. Tried every combination of Nailed up and connectivity check I or Zyxel support could thing of. No combination resolves the problem of needing to reboot the appliance when the VPN fails unrecoverably.
-
Hello, I am not using IKE 2. Yes have tried every combination of "nailed up" and "connectivity check" I or Zyxel support could think of. Then we started mixing in which gateway is "Respond Only" and "Initiate", these (if I recall) are only choices in Sophos. Not configurable in the Zyxel. Oddly, when the Zyxel messes up,…
-
Patched and Imported. Thank you!!
-
Testing, I used a p12 file from Oct 2023 (expired). The same p12 file that loaded into the zywall in Oct 2023. That same p12 file now fails. Which is proof that Zyxel broke the software for USG Flex 700. Can we get an emergency fix.
-
-
Yes thank you.
-
Also "There should be an overlapping wireless coverage of about 15% to 20% between the APs (firewalls)." How exactly would "over lap" be measured?
-
Thanks Judy, I had already watched the "How to Set up Seamless Wireless Roaming?", that is video is why I had my question. In that "How to", it specifically show a "NXC" controller being used with a USG. I wanted to make sure that the USG Flex 700 did NOT need any type of controller, that it would be the WLC. I hope you…
-
Hi Jeff, thanks. Are you saying that "Nailed-Up" is causing the problem? And is there a CLI for ipsec "disconnect" ?I have removed the 'check' from "Nailed-Up" on that tunnel, I'll see if it becomes more stable.