Comments
-
Hi @cssml, What is the current firmware version on your NAS326? Please press the hardware reset button at the back of NAS for 2 seconds, and you will hear one beep sound, then release the hardware reset button. This resets the NAS's IP address and password to the default setting (admin/1234).
-
You may try to reset your NAS326. P.S. Reset would not remove your data.
-
You can check below discussion. https://homeforum.zyxel.com/discussion/3370/faq-upgrading-latest-nas-remote-code-execution-vulnerability-firmware#latest https://homeforum.zyxel.com/discussion/3317/zyxel-security-advisory-for-the-remote-code-execution-vulnerability-of-nas-products/p1
-
Found a article from Zyxel, not sure your is compatible or not. https://support.zyxel.eu/hc/en-us/articles/360003640840-NAS-Series-Connecting-a-Printer-Print-Server
-
Can you share what is your network topology? And is possible to post some screenshots to clarify it?
-
What do you mean about "online utility"? Is possible to provide related screenshots? Do you able to find NAS325v2's IP address from Orbi mesh system? If yes, when you access NAS325v2's IP address, can you see login page of NAS325v2's web interface?
-
After did this setting, do you able to access your NAS326 from outside? You also can refer to this discussion. https://homeforum.zyxel.com/discussion/comment/8053#Comment_8053
-
It seems that there is port conflict. May I know what is the purpose of this configuration? If you want to access your NAS326 from outside, I will suggest you to add port forward on your router.
-
Do you mean lost volume/disk? What is RAID type of your NAS520? What's mean? Has any screenshots?
-
When NAS326 is connected to the router, does LAN LED (NAS326 and the router) light? Do you hear any beep on NAS326? Here is Rescue Sticks, please find it. https://homeforum.zyxel.com/discussion/comment/8012#Comment_8012
-
Go to NAS -> Control Panel -> Service -> Media Server -> Share Publish. Deselect everything and click "Apply". Then, select again everything in "Share Publish" and click "Apply". Does Twonky start showing all the files back?
-
Checked by mine, ZyXEL Drive works properly. For Permission Denied, do you ever change any default access right of Users/Groups/Shared Folders? If you're not sure, I recommend that reset NAS326 and check it again with default setting. For remote access URL via browser, which user account you used? admin or normal user…
-
Can you share the screenshots and steps to check your problem?
-
On TFTPD software, what is Host IP you set? Can you share the screenshot? And when your PC set a static IP as 192.168.1.X, do you able to access 192.168.1.2?
-
https://homeforum.zyxel.com/discussion/comment/5371#Comment_5371 After you done firmware recovery, do you still not able to access WRE2205v2? WRE2205v2---[Ethernet Cable]---Laptop, does your laptop receive the IP? (After reset WRE2205v2, default SSID doesn't hide.) If it doesn't work after you tried everything, your…