sdesan

Comments

  • The router replacement was simultaneous with the firmware uprade? -> no, the day after. The replacement was already planned to improve the wifi coverage There was any other device connected to the router, other than the GS1900-48?-> No switch to Linksys lan port and Internet to Linksys Wan port Was this device involved in…
  • Hi Melen, i have activated Mirror of all port to Port 16 where is connected a PC with Wireshark installed and i 'm capturing all traffic for any future checks. But even in the absence of switch blocks, is there anything in particular to check immediately with Wireshark? Another curiosity: I replaced a Linksys WRT54GL v…
  • Thank you for the answer. I see it and i update again firmware. Now i see in panel V2.70(AAHN.3) | 07/26/2022 I'm waiting for events Ssomeone told me that the block maybe sometimes happens when you start very large data transfers> 1 Gb but I don't know if it's a coincidence
  • Thank you for the answer -> Did you try to ping the switch but get a failure result? Yes, all network traffic stops from any pc to any pc -> If you did not try, you can use a directly connected PC to ping your switch, your gateway, and the Internet to determine if your GS1900-48 stops exchanging data or not. If i connect…
  • Thank you for the answer ->It is updated the firmware? Yes V2.70(AAHN.3) ->Which was the previous switch? Dell PowerConnet 2800 (actually used in other lan without problem. Even this sometime stopped to work and i have to reset, so i choose GS1900 becouse is managed and probably more efficient) ->it was already 1GBPs…
Avatar