PeterUK 
Guru Member
-
Re: Although I have created the rule, SMTP is blocked
Are you sure you need inbound connection and not outbound? Some ISP block port 25 looking at your NAT rule source IP should be any it makes no sense to be WAN1_IP that for external1 -
Re: Android 14 VPN to USG 1100
IKEv2 I take it? Phase 1 encryption AES128 authentication SHA256 key Group DH14 but might be higher Phase 2 encryption AES128 authentication SHA256 PFS DH2 on phone setting for the VPN IPsec identifi…1 -
Re: site-to-site VPN works, but no ping/traffic
In my setup I have USG60W VLAN4093 192.168.252.0/23 with tunnel FLEX200H Ge3 192.168.254.10/29 as WAN to LAN2 192.168.254.9/29 on USG60W VLAN47 on FLEX200H 192.168.255.32/28 To ping 192.168.255.40 fr…1 -
Re: USG60 - IPSEC VPN failing at Phase 1, even though proposal seems to match?
for windows default are For the windows client L2TP/IPsec last I checked was Phase 1 3DES/SHA1 DH2 Phase 2 AES256/SHA1 PFS none however this can be increased https://community.zyxel.com/en/discussion…2 -
Cold boot FLEX200 SFP not coming online
USG FLEX 200 V5.37(ABUI.2) So had a power cut that my UPS could not keep everything running then when power come back the SFP looked dead after checking which is connected to a NETGEAR GS110T things …1
