PeterUK 
Guru Member
-
Re: IPSecVPN - Cannot ping remote IP range
Devices need to allow ICMP inbound on there firewall for one. you maybe need a routing rule above any other rules like LAN1 next hop WAN with a rule above LAN1 destination subnet of IPs over the tunn…1 -
How to setup for site to site with VPN and both sites have same subnet
Site A and B can connect to each other using a fake IP subnet to map to from real LAN subnet that are the same on both sites. From Site A 192.168.138.4 to 192.168.70.5 maps to 192.168.138.5 on site B…2 -
Re: Where are the Firmware Updates for FLEX 500H ?
1 -
Re: How do I policy route WAN traffic for a single device through Site to Site IPSec tunnel?
Looks correct for remote side Have site to site the Main device being a different vendor might not support what your trying to do. You may try site to site the Main device local policy 0.0.0.0/0 remo…1 -
Re: VPN not working any more after reboot
Well I tested here locally with a DDNS cert IKEv2 on FLEX200 as server role connects OK by windows1
