ikubuf  Ally Member

How do you change the IP address? Set static IP for the device or set MAC binding on the modem/router above?

As I found in the thread of this article. you can try with the set up of this topology and then recheck it. Or you may reset all devices and change their position and also devices and re set up again.

I can downgrade the firmware from the cloud server, if you're still suffering the firmwar cannot upgrade from cloud server, you can download filezilla and try to access ftp2.zyxel.com to get the firmware from the FTP server directly.

which model do you use??

If both devices are in the same pack. As I remember the PLA5456 does not need to pair to the other device after reset, they'll pair to each other.

It seems that you are attempting to use a blocked device to unblock other devices on the Multy app. To resolve this, I suggest using a different mobile device to log in to your Multy account and unblock your phone.

To copy a file, it is recommended to first back up the file to your laptop or any other storage location where you can safely store your data. Afterward, create a new volume and transfer the data to the disk.

It required to use 8 characters on the password

Are you using Google web browser? you can ty to clean the browser cache. You can try with developer tools on Chrome by pressing Ctrl+Shift+I And click the disable cache and refresh the pages.

Hi @philtrick To clarify the Multy Network issue, you can provide with more detailed information about how you installed it. How did you connect the LAN cable? Which port did you connect the LAN cable to on your router, Main Multy, and satellite? You can also send the feedback log from the Multy APP

As I know, to change domain name, you can still set up DDNS by configuring your router. Enable DDNS on the WAN interface of your router (you can find free ddns to use them) and configure the necessary port forwarding rules to forward traffic from the WAN to the LAN IP address of your NAS. Once this is done, you can access…

You can try with this repo http://metarepository.tk/Users/Mijzelf/zypkg-repo/

Verify your network settings on the NAS, including the IP address, subnet mask, gateway, and DNS settings. Ensure that the NAS is configured with the correct subnet as the connected router and that the gateway is set to the router's IP address. This will ensure that the NAS is able to communicate properly with the router…

You can check you IP address by type the command :ifconfig After you check the result of the ifconfig, you'll get a modem IP address. enter your modem IP address and find out your router IP address in the DHCP table. Then you're able to get in to the router with the IP address on the DHCP table.

Try accessing the NAS from a different web browser, or clear the cache and cookies on your current browser. Sometimes, an outdated browser can cause issues with accessing the NAS.