HUBERT_KASPRZAK 
Freshman Member
評論
-
I reported the same problem for 200H at the beginning of the month, I thought the update would help, but it didn't work, the port was physically turned off and turned on after 2-3 minutes. The problem still occurs. USG FLEX 200H -1.30 (ABWV.1) - Port 3 is down — Zyxel Community
-
After deleting many files, there is no change in the window (refresh) - the system deletes them but does not refresh the current window.
-
After uploading 1.31, even Backups from before version 1.30 appeared and were not visible at all. In version 1.31, it is possible to delete many System Logs, but after using this option you need to refresh the window and this must be corrected
-
Further diagnosis of the problem on January 1-2, 2025. The system turns Port 3 off and on by itself. 2025-01-01 19:53 alert system Port 3 is down! 2025-01-02 06:34 alert system Port 3 is up! 2025-01-02 06:34 alert system Port 3 is down! 2025-01-02 06:39 alert system Port 3 is up! 2025-01-02 06:39 alert system Port 3 is…
-
I will check in the next few days and let you know
-
EBL can be managed manually, I expect that if I use a list, the addresses on it are not allowed by the device and the behavior is similar to the control principle. I don't see such a setting, and a person who is on the blacklist gets a rejection instead of a refusal. Which causes frequent attempts to further establish a…
-
Check the log on the USB to see if you have over 50,000 entries , , , warn , user , two-factor auth. , , , , Two-factor Auth. daemon: uam_read_event error, ret = -1
-
Pop3, port standard 110. Please provide the e-mail address to which the virus messages should be sent
-
After observing the device for 1 month with the FLEX 200 H - V1.21(ABWV.0)ITS-24WK35-m5760 software, I found that it did not detect 40 email infected with extensions*. bat, exe, pdf, rar, img, doc. Fortunately, Eset removed the threat after downloading the message. Attached is the 200H setting and a screenshot from…
-
For 1 month, Flex did not detect 40 infected files in mail, it only detected 2
